Greadio D10 DAB FM Digital Radio User Manual

Greadio D10 DAB FM Digital Radio

Introduction

This product is the third generation radio DAB+, with FM/BT /TF/USB flash drive/clock/alarm clock function, very practical.
There are also multi-function digital radios such as automatic proofing time and six language selections. Please use it with confidence.

Overview

① MODE: DAB/FM/BT/SD/USB function mode
② TUNE-: Previous song/ volume -/ Tuning –
③ TUNE+: Next song/ volume +/ Tuning +
④ LED Screen
⑤ ENTER/SCAN :Enter/scan/play/pause/snooze
⑥ BACK/MENU/INFO :Back/menu/information
⑦ PRESET : Preset DAB FM stations
⑧ ALARM: Alarm clock
⑨ POWER: Long press power on / off. Short press Mode switching
⑩ Volume Knob:Volume +/-
11 Handle
12 Diaphragm
13 Speaker
14 Antenna
15 USB Disk Socket
16 TF Card Socket
17 Earphone Jack
18 DC 5V
19 Bottom Pad

POWER ON/OFF

Power ON/OFF : Long press the ” “ to turn it on, and the screen displays the time. Press and hold it again to power off.

MODE SWITCHING

After power on, it will automatically enter the clock / system setting mode. Short press the ” “ to Radio/Audio playback mode.
Short press the ” ” again to switch to the clock / system setting mode.

LCD DISPLAY SCREEN

1. LED display screen: Display time/date/BT/SD/USB disk, radio channel, battery icon, text information, etc.
2. Low battery indication: A: battery icon shows space and blinking means the power is low and should be charged in time. B: battery icon shows full frame means the power is sufficient.
3. Charging indication: C: lightning bolt on the battery icon indicates charging.

• A: Low

• B: Sufficient

• C: Charging

RADIO/AUDIO PLAYBACK MODE

DAB RADIO

1. After power on, short press “ ” to switch to Radio/Audio playback mode.

2. Press “ ” to select DAB mode.

3. Long press “ ” to automatically search for DAB stations.

4. Press “ ”/“ ” to switch to the previous/next station.

5. Menu:Long press “ “ to enter DAB setting menu.

6. < Full scan >Long press ” ” to scan all the frequencies. *All the stations received are saved in the DAB program list in a dictionary order of short label; if the DAB program list is empty, the DAB mode will always be displayed in DAB menu mode.
7. < Manual tune > Tune for a certain frequency band selected by DAB. *Press ” ” to enter the frequency point selection of DAB and enter manual tuning. *Press ” / ” to select the DAB channel. Then press “ “ it again, the signal strength of the frequency point is displayed at this time. *Long press the ” ” to exit. Preset: -Manual preset stations: Select frequency station, short press , press ” /  ” to select storage number,short press ” ” to preset. -Preset recalled radio playback: (1)long press ” ”（2）press ” / “ to select the number（3）short press ” ” to confirm. **Note** : If you do not press the “ ” button to confirm and without any operation after finishing to set the preset number, it will automatically jump to the station you preset after 10 seconds.

8. Press “ ”to enter the “Prune”setting and select “YES” to clear the invalid programs from the DAB list. Note: Invalid programs refer to those that have no stations or weak radio signal in the local received frequency.

9. DAB system setting：Press ” ” to enter settings.

   < SLEEP > Sleep setting: Press the “ / ” to select sleep time :OFF , 15, 30, 45, 60, 75, 90, 105, 120 minutes. Then press ” ” to confirm ( **NOTE** :select OFF screen SL disappears, select digital screen left display SL). – 2.4.2., , , , , etc. Refer to the system settings.

10. DAB frequency information description: The line shows the name of the DAB program Long label (long name). After the reception is completed: Press the ” ” to view the information about DAB programs in sequence.

11. DLS: Text message, if not , playing displayed.

12. Signal Strength: Signal Strength.

13. Program Type: Program type, if not, displays ”No PTY”.

14. Ensemble Name: The name of the radio.

15. Frequency and : Radio frequency, for example: 5A 174.928MHz.

16. Signal error: 0: Error rate 0%.

17. Bit rate and Audio: Bit rate and audio status, e.g. 192kbps / DAB+.

18. Time: radio time, if not, display ”No Time”.

FM RADIO

1. After power on, short press“ ” to to switch to Radio/Audio playback mode.

2. Press “ ” to select FM mode.

3. Find radio station: Short press the ” / ” button to switch the frequency manually, long press ” / ” button to switch to the next frequency where the signal can be received.

4. Preset Store Stations

5. Auto search radio: Long press ” ”, to receive stations for all frequencies and preset all received programs automatically.

6. Manual preset stations: Select frequency station, short press ” ” press ” / ” to select storage number, short press ” ” to preset.

7. Preset recalled radio playback: (1)long press ” ” （2） press ” / ” to select the number（3）short press ” ” to confirm.
   Note : If you do not press the “ ” to confirm and without any operation after finish to set the preset number, it will automatically jump to the station you preset after 10 seconds.

8. Menu:Long press ” ” to call up select menu , < Audio setting> select by ” / ” press ” ” to confirm.

9. Scan setting: Search setting, full frequency search/strong signal frequency search.

10. Audio setting：Forced mono/Stereo allowed.

BLUETOOTH

1. After power on, short press“ ” to switch to Radio/Audio playback mode.

2. Press“ ” to select Bluetooth mode.

3. Paired devices: Turn on Bluetooth on your phone or other devices with Bluetooth.

4. Pairing operation: Turn on Bluetooth on the phone/mp3, search for Bluetooth devices.

5. Pairing name: Click on the Bluetooth name“D10“ pairing, there is a voice prompting successful pairing.

6. Volume control:After successful pairing, you can adjust the volume on the
   device/product.

7. Operation functions: Press “ “ to play/pause, press “ / “ to switch to the previous/next operation.

8. Connection range: connect with in 10 meters of the device.
   NOTE

9. Before connecting cell phones, MP3 and other Bluetooth devices to the D10, make sure that other electronic Bluetooth devices are not connected to the D10.

10. If you can’t search and connect D10, please restart the Bluetooth of cell phone, MP3 and other Bluetooth devices.

SD（TF）PLAYBACK

1. After power on, short press “ ” to Radio/Audio playback mode.
2. Press “ ” to select SD mode.
3. Plug and Play: Insert the TF(SD) card.
4. Operation function: Press “ “ to play/pause, short press “ / “ for the previous/next song, long press “ / “ to fast rewind/fast-forward.

USB PLAYBACK

1. After power on, short press “ ” to switch to Radio/Audio playback mode.
2. Press “ ” to select USB mode.
3. Plug in a USB flash drive to play.
4. Operation function: Press “ “ to play/pause, short press “ / “ for the previous/next song, long press / “ to fast-rewind/fast-forward.

CLOCK/SYSTEM SETTING MODE

Press and hold the “ ” to turn on, it will enter the clock/system setting mode by default. Press “ ”, the LED screen will display “system” and then press “ ” to confirm to enter the system settings. Press the “ / ” to select < Backlight > < Language > < Factory Reset> < SW version > options for setting.Short press “ ” to save the settings.Short press “ ” to return to the previous step.

1. time setting: Short press “ ” to enter the setting, press “ / ” to select, ,<Set 12/24 hour>,, .

2. Time/date setting:
   Press “ ” to enter the time/date setting, to adjust the time/date up and down with the “ / ” .
   Each time you need to press “ ” to the next step, when you have finished setting the month-day-year-hour-minute press “ ” to save.

3. Time format: Press “ ” to enter the setting, press “ / ” to select , ,already selected will be marked with “*”, finally press “ ” to confirm to save the setting.

4. Date format: Short press “ ” to enter the setting, press “ / ” to select , already selected will be marked with “*”, finally press “ ” to confirm to save the setting.

5. Auto update: press “ ” to enter setting, press “ / ” to select ,,, , already selected will be marked with “*”, finally press “ ” to confirm and save.

6. Backlight: Press “ ” to enter the setting, press “ / ” to select , option to set, press “ ” to return to the previous step.
7. Duration of time display: press “ ” to enter the setting, press “ / ” to select ,<10 Sec>,<20 Sec>,<30 Sec>,<45 Sec>,<60 Sec>, <90 Sec>,<120 Sec>,<180 Sec>, already selected will be marked with “*”, press “ ” to save the setting.

8. Display brightness: short press “ ” to enter the setting, press “ / ” to select ,, , already selected will be marked with “*”, press “ ” to confirm.

9. Language: Short press “ ” to enter the setting, press “ / ” to select the language, default is , press “ ” to confirm and save.
   NOTE : There are six preset languages: German, Italian, French, Spanish, Portuguese; The selected item is marked with “*” in the top right corner.

10. Reset factory settings: press “   ” to enter the settings, optionally reset, after resetting, all states of DAB module are restored to the default state of factory settings

11. DAB software version number: press “ ” to enter the setting, you can check the version number of DAB software.Press the “ ” button to return.

ALARM SETTING

(the following 9 steps are to be set consecutively)

Quick setting: After entering the alarm clock state, go to the next step by  “ ” , “ / ” to adjust the time.

1. Enter alarm:Long press the “ ” to turn on and enter the clock/system setting mode by default, press “ ” into the clock state.
2. Select alarm: Press “ / ” to select alarm clock 1, alarm clock 2
3. To set the time: Press “ ” to enter.
4. When the minute flashing,press the “ / ” to adjust, press the “ ” to confirm.
5. When the hour flashing, press the “ / ” to adjust the points, press the “ ” to confirm.
6. Loud alarm duration: Press “ ” to enter, loud alarm duration is flashing, press “ / ” to adjust, Press “ ” to confirm and save.
7. Setting the ringer: Press “ ” to enter, the alarm mode is flashing, press “ / ” to select,,, press “ ” to confirm and save.
8. To set the alarm: Press “ ” to enter, the alarm day is flashing, press “ / ” to select press “ ” to confirm and save.
9. To set the date: Press “ ” to enter, the date day is flashing, press “ / ” to adjust the number of days, press “ ” to confirm, the date month is flashing, press “ / ” to adjust the number of months, press “ ” to confirm, the date year is flashing, press “ / ” to adjust the number of years, press “ ” to save.
10. Setting the volume: Press the “ ” to enter, the volume is displayed, press the “ / ” to adjust the volume.
11. To set on and off: Press “ ” to enter, on/off is flashing, press “ / ” to select Alarm on or Alarm off, press “ ” to save.
12. Snooze: When the alarm clock goes off , press “ ” to delay the alarm. Press 1 time to delay the alarm for 5 minutes , press 2 times in succession to delay the alarm for 10 minutes, press 3 times in succession to delay the alarm for 15 minutes, press 4 times in succession to delay the alarm for 30 minutes.
13. To turn off the alarm: Press the “ ” after the alarm has sounded.
    (Can be reset by pressing “ ” while setting to go back up to)
    NOTE : The alarm clock sound will slowly get louder from small, and the time will be about 30 seconds to reach the maximum sound.

TYPE-C CHARGING

1. Insert the Type-C cable into the charging port of the product, and connect the other end to a computer/5V 1A charger.
   NOTE : When the battery is too low, it will automatically shut down, please pay attention to charging in time.

SPECIFICATIONS

MAINTENANCE

1. If the machine is used for the first time or has not been used for more than 60 days, please charge it for 2 hours first.
2. When using this machine, please do not discharge excessively, so as not to reduce the service life of the battery in the machine, or even damage the rechargeable battery in the machine.
3. Only use a soft wet cloth to clean this product, and do not use alcohol or other corrosive liquids to clean this product.

WARRANTY

The device has a full 12-month warranty against manufacturing defects from the date of purchase.

PACKING LIST

• Product x 1
• Cable x 1
• User manual x 1

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>