Folews 3 Tier Rolling Cart Heavy Duty Installation Guide
- June 16, 2024
- Folews
Table of Contents
Folews 3 Tier Rolling Cart Heavy Duty
Contents
Installation
-
O. Screw the 4 wheels(F & G) into the poles(B).
-
Install the bottom shelf
-
Place two joint clips(C) into the appropriate groove on each pole as below (8 joint clips in total). Ensure the arrows on the clips are facing upwards. Gently slide down one shelf(D) through the pole(B) until it fits firmly against all the joint clips(C).
NOTE : The joint clips(C) for each pole(B) must be at the same height to ensure that the shelf is level. -
- Repeat step 2 to install one more shelf(D). Choose a suitable height between each shelf.
- Repeat step 2 to install one more shelf(D). Choose a suitable height between each shelf.
-
-
Repeat step 2 to install one more shelf(D). Choose a suitable height between each shelf.
-
Repeat step 2 to install the basket(E). Hanging up the hooks).
Safety Information
- Recommended to be installed by two adults. Be careful when handling.
- Recommended to install on a soft surface, such as carpet, to prevent scratching the floor finish.
- The black circular plastic pieces are only used to separate and protect the shelves during shipping.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>