vtech 567400 Kitty Cat Instruction Manual
- May 15, 2024
- vtech
Table of Contents
vtech 567400 Kitty Cat
Specifications
- Product Name: I See You! Kitty CatTM
- Power Source: 2 AA (AM-3/LR6) batteries
- Recommended Battery Type: Alkaline or Ni-MH rechargeable batteries
- Features: Light-up Heart Button, Open & Close Arms, On/Off/Volume Selector, Music Button, Nature Sounds Button
Battery Removal and Installation
- Ensure the unit is turned Off.
- Locate the battery cover on the back of the cat’s tail.
- Use a screwdriver to loosen the screw and open the battery cover.
- Remove old batteries by pulling up on one end of each battery.
- Install 2 new AA (AM-3/LR6) batteries following the diagram inside the battery box.
- Replace the battery cover and tighten the screw securely.
Product Features
- On/Off/Volume Selector: Slide to Low Volume or High Volume position to turn On. Slide to Off position to turn Off.
- Automatic Shut-Off: Unit will automatically shut off after 45 seconds without input to preserve battery life.
Activities
- Light-Up Heart Button: Press for fun sounds, phrases, and peek-a-boo play with flashing lights.
- Music Button: Press to hear melodies and songs with flashing lights.
- Nature Sounds Button: Press to hear relaxing nature sounds with flashing lights.
Melodies
Song Lyrics:
Care & Maintenance
- Wipe clean with a slightly damp cloth.
- Avoid direct sunlight and heat sources.
- Remove batteries during extended non-use.
- Avoid dropping on hard surfaces or exposure to water.
- Surface washable only, do not submerge in water.
FAQ
-
Q: How do I change the melodies being played?
A: Press the Music Button to cycle through different melodies available in the toy. -
Q: What should I do if the lights stop flashing during play?
A: This may indicate low battery power. Follow the battery installation instructions to replace with fresh batteries.
Instruction Manual
INTRODUCTION
Thank you for purchasing the I See You! Kitty CatTM.
Let’s play a classical game of peek-a-boo with this adorable cat. Snuggle the
huggable plush and press the flashing heart to cover and uncover Kitty’s eyes!
INCLUDED IN THE PACKAGE
- I See You! Kitty CatTM
- Quick Start Guide
WARNING
All packing materials such as tape, plastic sheets, packaging locks, removable
tags, cable ties, cords and packaging screws are not part of this toy, and
should be discarded for your child’s safety.
NOTE
Please save this Instruction Manual as it contains important information.
WARNING
Keep this soft toy out of the sleeping environment for babies under twelve
months to avoid suffocation risk.
INSTRUCTIONS
WARNING
Adult assembly required for battery installation. Keep batteries out of reach
of children.
Battery Removal and Installation
- Make sure the unit is turned Off.
- Find the battery cover on the back of the cat’s tail, use a screwdriver to loosen the screw, and then open the battery cover.
- Remove old batteries by pulling up on one end of each battery.
- Install 2 new AA (AM-3/LR6) batteries following the diagram inside the battery box. (For best performance, alkaline batteries or fully charged Ni-MH rechargeable batteries are recommended.)
- Replace the battery cover and tighten the screw to secure.
IMPORTANT: BATTERY INFORMATION
- Insert batteries with the correct polarity (+ and -).
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.
- Only batteries of the same or equivalent type as recommended are to be used.
- Do not short-circuit the supply terminals.
- Remove batteries during long periods of non-use.
- Remove exhausted batteries from the toy.
- Dispose of batteries safely. Do not dispose of batteries in fire.
RECHARGEABLE BATTERIES
- Remove rechargeable batteries (if removable) from toy before charging.
- Rechargeable batteries are only to be charged under adult supervision.
- Do not charge non-rechargeable batteries.
PRODUCT FEATURES
-
On / Off / Volume Selector
To turn the unit On, slide the On/Off/ Volume Selector to the Low Volume or the High Volume position. You will hear a phrase, a song and a fun sound. To turn the unit Off , slide the On/Off/Volume Selector to the Off position. -
Automatic Shut-Off
To preserve battery life, the I See You! Kitty CatTM will automatically shut off after approximately 45 seconds without input. The unit can be turned on again by pressing any button.
NOTE
If the unit powers down or if the light fades out during play, please install
a new set of batteries.
ACTIVITIES
-
Light-Up Heart Button
Press the Heart button to hear fun sounds and phrases. The cat will open and close its arms to play peekaboo. The lights will flash with the sounds.
-
Music Button
Press the Music button to hear playful melodies and songs. The lights will flash with the sounds. -
Nature Sounds Button
Press the Nature Sounds button to hear relaxing nature sounds. The light will flash with the sounds.
MELODIES
- A-Tisket A-Tasket
- Do You Know the Muffin Man?
- Diddle, Diddle Dumpling
- Did You Ever See a Lassie?
- Glow Worm
- Good Morning Merry Sunshine
- Here We Go Round the Mulberry Bush
- Hickory Dickory Dock
- One, Two, Buckle My Shoe
- Itsy Bitsy Spider
- Jack Be Nimble
- London Bridge
- Looby Loo
- Pat-a-Cake
- Ten in the Bed
SONG LYRICS
- Song 1
- You and I together, We’ll be best friends forever.
- When you give me a great big hug.
- It makes me feel so good.
- Song 2
- Peek-a-boo, where are you?
- Peek-a-boo, are you hiding too?
- Peek-a-boo! I see you!
- Song 3
- I love you in every way.
- Higher than the clear blue sky.
- Song 4
- Peek-a-boo! Peek-a-boo!
- I see you, I see you!
CARE & MAINTENANCE
- Keep the unit clean by wiping it with a slightly damp cloth.
- Keep the unit out of direct sunlight and away from any direct heat sources.
- Remove the batteries if the unit will not be in use for an extended period of time.
- Do not drop the unit on hard surfaces and do not expose the unit to moisture or water.
- The cat is surface washable only. Do not submerge the cat in water.
TROUBLESHOOTING
If for some reason the unit stops working or malfunctions, please follow these steps:
- Turn the unit Off.
- Interrupt the power supply by removing the batteries.
- Let the unit stand for a few minutes, then replace the batteries.
- Turn the unit On. The unit should now be ready to use again.
- If the unit still does not work, install a new set of batteries.
IMPORTANT NOTE:
If the problem persists, please call our Consumer Services Department at
1-800-521-2010 in the U.S., 1-877-352-8697 in Canada, or by going to our
website vtechkids.com and filling out our Contact Us
form located under the Customer Support link. Creating and developing VTech
products is accompanied by a responsibility that we take very seriously. We
make every effort to ensure the accuracy of the information, which forms the
value of our products. However, errors sometimes can occur. It is important
for you to know that we stand behind our products and encourage you to contact
us with any problems and/or suggestions you might have. A service
representative will be happy to help you.
NOTE
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
- Trade Name: VTech®
- Model: 5674
- Product Name: I See You! Kitty CatTM
- Responsible Party: VTech Electronics North America, L.L.C.
- Address: 1156 W. Shure Drive, Suite 200
- Arlington Heights, IL 60004
- Website: vtechkids.com
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
- THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
- THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Visit our website for more information about our products, downloads, resources and more.
Read our complete warranty policy online at vtechkids.com/warranty vtechkids.ca/warranty
TM & © 2023 VTech Holdings Limited. All rights reserved.
IM-567400-000
Version:0
Documents / Resources
|
vtech 567400 Kitty
Cat
[pdf] Instruction Manual
567400 Kitty Cat, 567400, Kitty Cat, Cat
---|---