ADAM Qi2 OMNIA M2plus Wireless Charging Station User Manual

OMNIA M2+

Qi2 2+1 Wireless Charging Station

User Manual
(READ MANUAL BEFORE PRODUCT USE)

Specification

Input:
USB-C female 15V ⎓ 3A/ 9V ⎓ 3A

Output:

• Qi2 Charger: 5V/5W, 7.5V/7.5W, 12V/15W

• AirPods Charging Base: 5V/5W
  (3W when AirPods are being charged)

• USB-C: 5V/5W

Compatibility:

iPhone 15 Pro Max, iPhone 15 Pro, iPhone 15 Plus, iPhone 15,
iPhone 14 Pro Max, iPhone 14 Pro, iPhone 14 Plus, iPhone 14,
iPhone 13 Pro Max, iPhone 13 Pro, iPhone 13, iPhone 13 mini,
iPhone 12 Pro Max, iPhone 12 Pro, iPhone 12, iPhone 12 mini
Compatible with official MagSafe cases

AirPods with MagSafe Charging Case
Wireless Charging Case for AirPods

Size: 85 x 125 x 145 mm
Weight: 266 g

Product Introduction

Caution: To avoid any damage to wireless charger, please check the output voltage of the power source is suitable for the charger.

1. Qi2 Charger
   for iPhone 12/13/14/15 series or later, AirPods With MagSafe Charging Case

2. AirPods Charging Base

3. USB-C Output Port

4. Smart Charging Light Indicator

5. USB-C Input Port
   • PD or QC adapter required, a 30W or above power adapter is recommended.

Recommended Accessory

OMNIA P3             USB-C 33W Compact Wall Charger

Input: 100-240V~, 50/60Hz, 1.2A
Output: 3.3-11V ⎓3A(PPS) / 5V⎓3A / 9V⎓3A / 12V⎓2.5A / 15V⎓2A / 20V=1.5A
Size: 33 x 31 x 40.1 mm
Weight: 47.1 g

OMNIA P33 GaN USB-C 33W Compact Wall Charger

Input: 100-240V~, 50/60Hz, 0.8A
Output: 3.3-11V⎓3A(PPS) / 3.3-16V⎓2A(PPS) / 5V⎓3A/9V⎓3A/12V⎓2.5A/15V⎓2A/20V=1.5A
Size: 32 x 32 x 42 mm
Weight: 47.1 g

OMNIA P3 Instruction

1. Fold the US plug
2. Change to EU plug
3. Change to UK plug

Light Mode

1. Plug in the power supply
   • Blue Light for 3’s then Turns Off

2. Standby / MagSafe Charging
   • No Signal

3. AirPods Charging / Full
   • Blue Light

4. FOD & Malfunction light Mode
   • Blue Light Flashes

FOD (Foreign Object Detection)

The light blinks when metal foreign objects are detected on the wireless charger.

1. x Metal Objects

• Only supports MagSafe compatible devices. 2. Caution:
  Please remove all metal objects from the back of your phone prior to charging.

  3. Caution:
     Do not place any credit card on charging pad to prevent damage or demagnetization.

Protective Function

Multiple Circuit Protection
Over-Heat Protection
Short-Circuit Protection
Over-Voltage Protection
Over-Current Protection
Flame Retardant Protection

Attention

Do not disassemble, puncture, drop, bend or modify
Do not shake while charging
Unplug the device when fully charged
Do not expose to liquids
Keep away from children
Avoid extreme temperatures
3 years warranty
For the fastest and safest charge, use an ADAM cable, your device’s original cable or a certified cable (such as MFi)
The information in this user manual may be changed without prior notice, please scan the CR code for the latest version.

FCC Statement :

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept aly interference received, Including Interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that Interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

(1) Reorient or relocate the receiving antenna.
(2) Increase the separation between the equipment and receiver.
(3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
(4) Consult the dealer or an experienced radio / TV technician for help.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be Installed and operated with minimum distance 20cm between the radiator & your body.

For more information please visit ADAM store

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>