WILLIAMSAV DWD 401 Digi Wave Connect User Guide
- May 15, 2024
- WilliamsAV
Table of Contents
Digi-Wave Connect
DWD 401
USER GUIDE
DWD 401 Digi Wave Connect
Digi-Wave Connect is an analog audio cable converter box that sends audio to
and from an existing Digi-Wave 400 system. By connecting your Digi-Wave
Connect to your local audio system, you can transmit sound from your audio
equipment to your Digi-Wave group, or output the audio from your Digi-Wave
group to your local sound system.
The USB cable connects the audio in, audio out f rom the Digi-Wave DLT
Transceiver and provides it to the Digi-Wave Connect.
Powering On and Charging
Connect the power cable to the power port on the Digi-Wave connect.
Once USB cable is connected to the DLT Transceiver from the Digi-Wave Connect,
the LED on the top of the DLT transceiver will light up. The device will
charge and stay charged while connected.
Connecting a DLT
A USB 3.1 type C cable is included with the DigiWave Connect and is used to connect a DLT transceiver to the Digi-Wave Connect.
NOTE: A Standard USB 2 type C will not work. Make sure you are using the
cable included with the system or another USB 3.1 type C cable.
Insert one end of the USB 3.1 type C cable into the bottom of the Digi-Wave
DLT transceiver, and insert the other end into the DLT port on the Digi-Wave
Connect.
No special settings for the DLT transceiver are required for the Digi-Wave
connect to work, although settings such as line in/out gain can be adjusted as
desired.
The DLT transceiver will constantly transmit sound once connected to the Digi-
Wave Connect, even without the use of the TALK button. To stop the
transmission of audio, disconnect the DLT transceiver from the Digi-Wave
Connect.
Connecting a DLR
A DLR receiver will not provide the same functionality as connecting a DLT
transceiver. A DLR receiver does not have a talk feature and cannot transmit
sound to the Digi-Wave group.
The DLR receiver can be used only for sending sound from a Digi-Wave group to
a local sound system. If sound does not need to be sent to other Digi-Wave
devices, this setup may be suitable.
Attaching the Bracket
A bracket (BKT 040) is included with the DWD 401.
This bracket can be used to mount the Digi-Wave device to the top of the Digi-
Wave Connect.
To prevent scratching, remove the lining from the two pieces of cork and
attach the each piece of cork to the long edges on bottom of the bracket.
Place the provided shoulder washer into the bottom of the center hole on the
base of the bracket. Insert the provided large screw with the round black head
f rom the top of the base of the bracket through the center hole at the bottom
of the bracket and into the shoulder washer.
There is another hole in the top of the Digi-Wave Connect that the bracket can
be screwed into. Twist the large black screw into this hole until the bracket
is secured to the top of the Digi-Wave Connect.
Place your Digi-Wave device in the upper part of the bracket. Ensure that the
USB 3.1 type cable is properly connected.
Connecting Audio Devices
Audio devices can be connected through the Line In XLR on the device. The Line
In audio can be balanced or unbalanced.
Connecting Audio Output
Audio output is connected via the Audio Out XLR on the device.
Playing Audio
Once the audio device and a DLT transceiver is connected, to the Digi-Wave
Connect, your audio from the DLT transceiver is ready to be transmit sound.
Add the DLT transceiver hard-wired to the Digi- Wave Connect to an active
Digi-Wave group like you would a normal individual user. For more information
on creating groups or channels, please see the full Digi-Wave manual.
The hard-wired DLT transceiver will transmit the audio for that group or
channel over the Audio Out of the Digi-Wave Connect. It will also broadcast
any audio from the Audio In source over the Digi-Wave channel or group.
For Additional Information
The Digi-Wave Connect is a Supplement to a DigI- Wave system. For more information on setting up and configuring a Digi-Wave system, please see the full user manual on the Williams AV website.
WilliamsAV.com
U.S. | 800.843.3544 info@williamsav.com
INTL | +1.952.943.2252 info-intl@williamsav.com
© 2023, Williams AV, LLC
MAN 277F
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>