Kamlam 24 Inch Low Profile Ceiling Fans with Lights Owner’s Manual

Kamlam 24 Inch Low Profile Ceiling Fans with Lights

Specifications:

• Lamp base safety steel rope
• Fan blades
• Wind guide wheel
• Remote x1
• Screw accessory set

Product Usage Instructions

Installation:

1. Open the package, take out the fan lamp, press down the base, and rotate to remove the base.
2. Take off the safety steel rope.
3. Fix the lamp base on the ceiling mounting base with screws. If there’s no mounting base on the ceiling, use an electric drill to drill installation holes on the ceiling and put the expansion pipe into the installation hole.
4. Buckle up the safety steel rope.
5. Use wiring caps to connect the L/N/Ground wires. Ensure the power is OFF before wiring.
6. Align the lamp body with the base, gently push both sides upward and rotate clockwise. Install the safety screw on the side of the lamp body to secure it.

Cleaning and Maintenance:

1. Remove the safety screw on the side of the lamp body, push it upward and rotate it counterclockwise to remove the fan lamp body.
2. Disconnect the wires and remove the safety steel rope.
3. Clean the protective net and fan blade after opening and taking out. Do not flush with water directly. Dry before reassembling to avoid falling risks.
4. Switch off the power before cleaning near electrical parts. Wipe up excess moisture with a sponge or cloth to prevent water damage.

WiFi Operation Instructions:

1. Download and install the App by scanning the QR code or searching for Smart Life in the application market.
2. Connect the device to power and ensure it works normally.
3. Power on and off three times to enter distribution network mode.
4. Open the Smart Life App, click Add Device, and wait for the automatic device search.

FAQ:

• Q: Can I use any type of cleaning liquid on the fan lamp?
  A: No, do not use flammable or toxic cleaning liquids. Use a damp cloth to clean and avoid direct water contact.

• Q: How do I reset the WiFi connection?
  A: You can reset the WiFi by turning off the power, waiting for a few seconds, and then restart the device.

PLEASE READ THIS OWNER MANUAL THOROUGHLY BEFORE OPERATING AND KEEP IT HANDY FOR REFERENCE AT ALL TIMES.

INTRODUCTION

• THIS KAMLAM CEILING FAN LIGHT IS MANUFACTURED WITH GREAT CARE,
• AND UTILIZES THE LATEST IN TECHNOLOGY. WE ARE CONFIDENT THAT YOU WILL BE FULLY SATISFIED WITH IT’S PERFORMANCE AND RELIABILITY.
• IT PROVIDES EXACT INSTRUCTIONS FOR INSTALLATION, OPERATION AND MAINTENANCE, AND ALSO SUPPLIES SOME USEFUL HINTS.

Note : The illustrations of the product, and accessories in this manual are schematic diagrams for reference only. Due to the update and upgrade of the product, the physical product may be slightly different from the schematic diagram. Please take the physical product as the standard.

INSTALLATION

1. Open the package, take out the fan lamp, press down the base, and rotate to remove the base;

2. Take off the safety steel rope.

3. Base installation

Fix the lamp base on the ceiling mounting base with screws, and confirm that the base is firmly installed. (If there’s no mounting base on the ceiling, use an electric drill to drill installation holes on the ceiling, put the expansion pipe into the installation hole)

4. Buckle up the safety steel rope

5. Wiring
   Use wiring caps to connect the L/N/Ground wires. (Make sure the power is OFF before wiring)

6. Hold the edges of both sides of the lamp body with both hands, align with the base, gently push both sides upward and rotate clockwise at the same time. After hearing the “click”, then install the safety screw on the side of the lamp body, and make sure the lamp body cannot rotate after installation. The installation is completed.

CLEANING AND MAINTENANCE

1. Remove the safety screw on the side of the lamp body, hold the fan lamp with both hands, push it upward and rotate it counterclockwise to remove the fan lamp body.
2. Remove the wiring caps, disconnect the wires, and remove the safety steel rope.
3. According to the opening sign of the protective net and fan blade, it can be cleaned after opening and taking out.

Note : Do not flush the lamp body with water directly. After the fan lamp is cleaned, please dry it first. To avoid the risk of falling, please confirm the parts are installed correctly.

WARNING
Always switch off the power before cleaning in the vicinity of electrical parts (lamps, fan blades, etc.). Wipe up excess moisture with a sponge or cloth to prevent water or liquid from getting into any electrical part and causing an electric shock. Do not use flammable or toxic cleaning liquids.

WIFI OPERATION INSTRUCTION

Download and install App
Use your phone to scan the QR code below or search “Smart Life” in the application market to download and install the App.

For the first use, you need to use your mobile phone number or Email address to register and log in.

Device configuration and control

1. Connect the device to the power supply and confirm that the device can work normally (the light turns on slowly);
2. Continuous ON-OFF-ON-OFF-ON Power on and off three times (power on for 2~3 seconds, power off for 5~10 seconds) to make the device enter the distribution network mode, at this time the main light source will remind you to breathe;
3. Open the Smart Life App, click Add Device in the upper right corner, and wait for the App to automatically search for peripheral devices;
4. After the App scans the device, click Add to bind the device;

REMOTE CONTROL INSTRUCTIONS

Pair code

• Connect the device to the power supply and confirm that the device can work normally (the light turns on slowly);
• Turn off the power of the device for 5~10 seconds and then turn on the power again;
• Long press Button 1 until the device flashes 3 times quickly, then let go;
• The code pairing of the remote control is successful. At this time, you can press the button to control the device.

Clear code

• Connect the device to the power supply and confirm that the device can work normally (the light turns on slowly);
• Turn off the power of the device for 5~10 seconds and then turn on the power again;
• Long press Button 2 until the device flashes 3 times quickly, then let go;
• The remote control is successfully cleared. At this time, the remote control can no longer control the device and needs to be re-paired before it can be used.

control

• Button 1: All off, short press to turn off the main light & color light & fan;
• Button 2: Fan mode, short press to switch between natural and comfortable wind;
• Button 3: Fan direction, short press to switch between forward and reverse;
• Button 4: fan rocker switch, only some models support this function;
• Button 5: Fan switch, short press to turn on/off the fan, long press the button for 5 seconds to enable the device to enter the App distribution network mode;
• Button 6: Fan speed, short press to adjust the speed of 6 levels
• Button 7: White light switch, short press to turn on/off the white light;
• Button 8: Color light switch, short press to turn on/off color light;
• Button 9: Brightness addition and subtraction, short press to adjust the brightness of 10 levels, and long press to adjust the brightness steplessly;
• Button 10: Addition and subtraction of temperature, short press to adjust the 10-level temperature, long press to adjust the temperature steplessly;
• Button 11: Color static cycle switching (red, yellow, green, blue, purple, white);
• Button 12: Color dynamic cycle switching;
• Button 13: 1 hour/4 hours countdown timer off, fan & white light & color light all off at the same time;

TECHNICAL SPECIFICATIONS

• Product: Modern ceiling fan light
• Model: QY-FSD039-CW
• Input: 100-240V,50/60HZ
• Fan wattage: 15W
• Light wattage: 24(2900k)-48W(6500K) (9 6 x 1W/LED middle)
• Total Wattage:24W+24W
• Light color Rage: 2900K-6500K
• Supportive system: Android 4.4 or iOS 9.0 and newer versions.
• Wireless connection: Wi-Fi IEEE 802.11b/g/n 2.4GHz, Alexa Voice, Google Assitant

PRODUCT FEATURES

SAFETY PRECAUTIONS

1. Please confirm whether the voltage meets the working voltage of the product before use. Using inappropriate voltage may damage the product and cause potential safety hazards;
2. The light source of this lamp is a nonuser replacement light source, and the light source in this lamp shall be replaced by the manufacturer or its service agent or a person with similar qualifications;
3. During the operation of the fan, do not touch the fan blade to avoid danger;
4. The installation height of fan lamp shall be more than 2.3m above the ground;
5. The lamp can be controlled by the remote controller and mobile phone software. After the lamp is turned off by the remote controller or mobile phone software, it does not mean that the power supply is cut off. In this case, it is forbidden to touch, replace or disassemble the lamp, otherwise it may cause electric shock and even casualties.

• Before installation, be sure to cut off the power supply to prevent electric shock. During installation, the operation shall be carried out in strict accordance with the instructions. If the installation is improper, it is easy to cause accidents such as fire, electric shock or lamp body falling.
• Please entrust electrical professionals to install or repair. The wiring shall comply with electrical standards or national standards to avoid danger.

TROUBLESHOOTING

IF YOU FEEL YOUR CEILING FAN LIGHT IS NOT OPERATING PROPERLY, CHECK THESE POSSIBLE CAUSES:

tripped?

Check whether the power switch is out of order.

LIGHT IS ON, BUT THE REMOTE DOESN’T WORK|  The remote’s batteries are weak, change the batteries of the remote controller.

The remote lost the pairing code. Please

re-pair the remote with the unit according to the instructions of pairing steps.

LIGHT WABBLES WHEN THE FAN IS ON|  Has the light base/cross hanger been loosened from the ceiling?

The fan blade is uneven, tighten the blade to

the motor.

CAN NOT CONNECT THE

APP

|  Is the App the newest version?

Has the Bluetooth function been turned on?

FAIL TO CONTROL THE

LIGHT

|  Please check whether the remote is out of order.

TECHNICAL SUPPORT

For technical support issues please visit the Amazon order page, our online technical support team members will answer your questions.

CONTACT INFORMATION

We want to hear your voice! Feel free to touch base if you encounter any issue using our product(s) or want to know more about our brand will be more than happy to provide top-notch pre-sales & after-sales service 24/7
Email:GDkamlam@hotmail.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>