SUPERNOVA TL3Z High Performance Tail Light User Manual
- May 15, 2024
- SUPERNOVA
Table of Contents
SUPERNOVA TL3Z High-Performance Tail Light
I am very happy that you have chosen this Supernova high-performance product! My development team has spared no effort and our product testers have ridden thousands of kilometres in adverse conditions to offer you a product you will enjoy for a long time. I wish you a great ride at all times!
PRODUCT CONTENT
- Tail light with cable for 26-29 inch fender
- Installation screw 3,5 x 6 mm
- 1 x Lock washers, 1 x spacer
TECHNICAL DATA
- Housing material Plastic PC, ABS housing
- Weight 20 g
- Candela 4.7 cd
- L x W x H 71 x 9.5 x 31 mm
- Signalling LEDS 34 red high-power LEDs
- Cable length 1.400 mm
- Road approval K 2291
- Connection 2-wired
- Warranty 5 years
INSTALLATION
Power supply and failure
It is noted that use is only allowed on bicycles with electric pedal
assistance (E-Bikes) if uninterrupted power supply to the lighting system for
at least two hours is ensured after disconnection due to discharge of the
assist drive, or if the drive motor can be temporarily used as a generator to
continue supplying power to the lighting system. In case of a failure of any
LED, the entire product must be replaced.
Mounting height and alignment
The lighting equipment must not be obstructed. The tail light must be mounted
at a fixed height above the road surface of a minimum of 250 mm and a maximum
of 1,200 mm at a 30° ±2° angle. WARNING! Mounting at a different angle does
not meet the legal requirements for the rear light and integrated Z-reflector,
and the function cannot be guaranteed.
Turning the tail light on and off
The tail light can be turned on and off through the vehicle display/handlebar
control unit. Drawing of the fender with hole spacing ±0.1 mm. The above-
ground heights of the holes vary from fender to fender to the 30° ±2°
installation angle.
- Suitable for 26-29″ wheels
The cable outlet must point upwards during installation!
Art. No
W-TL3Z-R2024
Suitable accessories
20 20-inch adapter for gap-free mounting on 20-inch wheels.
Note for all connectors of this type.
ATTENTION!
Insert the cable ends into the connector as far as possible and do not remove
insulation.
IMPORTANT!
Do not press the tap deeper than the edge of the housing! Requested tool:
Scotchlok™ IDC crimping pliers (E-9Y)
GENERAL INFORMATION
WARRANTY & SERVICE
5 years warranty
The warranty is void if the housing is opened and in case of unqualified
repairs. More and more drive manufacturers work with us to become Supernova-
compatible. This means that we will regularly update this manual. Please
compare the version number on the cover with the latest version on our
website:
CARE INSTRUCTIONS
- Never use a high-pressure hose
- Clean with water and a soft, clean cloth
- Do not use aggressive cleaning agents (also no alcohol!)
- Do not dispose of tail light in household waste!
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>