BRESSER Spezial Zoomar 12-36×70 Zoom Binoculars Instruction Manual
- June 4, 2024
- BRESSER
Table of Contents
BRESSER Spezial Zoomar 12-36×70 Zoom Binoculars
Dear customer,
This instruction manual was created for various models in our series of
binoculars. Pages 2-4 present the relevant features in pictures. Depend-ing on
the model you have purchased, this chap-ter of the manual covers the
binoculars in full or in part. As a result, please pay attention to the
letters ( P or C ) to make sure that a chapter applies to your model.
Please read this manual carefully and completely before using the binoculars.
Your BRESSER Team
P = Porro prism model
C = Compact model
General Safety Informations
RISK of physical injury!
Never look through this device directly at or near the sun. There is a risk of
BLINDING
YOURSELF!
Children should only use this device under supervision. Keep packaging
materials (plastic bags, rubber bands, etc.) away from children. There is a
risk of SUFFOCATION.
Fire/Burning RISK!
Never subject the device – especially the lenses – to direct sunlight. Light
ray concentration can cause fires and/or burns.
RISK of material damage!
Never take the device apart. Please consult your dealer if there are any
defects. The dealer will contact our service centre and send the device in for
repair if needed.
Do not subject the device to temperatures exceeding 60° C!
List of Parts
-
Centre axle
-
a Twist-up eyecups
or
b Rubber eyecups -
Diopter adjustment
-
Body of the binoculars
-
Lens tube
-
Central focussing wheel
-
Eyepiece
-
Objective lens
-
Threaded tripod connection
-
Zoom lever
-
Magnification scale
-
Image circle with correctly set eye distance
Eyepieces for spectacle wearers
Depending on the model, your binoculars are equipped with either twist-up
eyecups (2a) or rubber eyecups (2b). Since there is a larger distance between
the binocular eyepiece and the pupil for those wearing glasses, both eyecup
varieties can be adjusted individually.
Twist-up Eyecups (2a)
Screw in the twist-up eyecups (2a) to use the binoculars while wearing
glasses. If you are not wearing glasses, unscrew the eyecups to achieve the
required distance from the pupils. OR
Rubber Eyecups (2b)
To use the binoculars while wearing glasses, turn the rubber eyecups (2b)
towards the sides and down. If you are not wearing glasses, leave the eyecups
in the upright position to achieve the required distance from the pupils.
Adjustments
Adjusting the eyepiece distance
The distance between the eyes differs between individuals. To achieve perfect interaction be-tween your eyes and the eyepieces of your binoculars set the angle at the centre of the bin-oculars (1) so that you see a circular image (12). Note this setting for later use.
Adjusting the focus P C
Look through your binoculars with your right eye closed. Now adjust the image for your left eye using the centre wheel (6) until it is sharp and clear. Close your left eye and adjust the image for your right eye using the diopter ring (3) until it too is sharp and clear.
Using the Zoom Function
You can use the zoom lever (10) to select various levels of magnification (11);
in general, the zoom is continuous. Simply move the lever back or forth to
zoom.
Please note : When changing the magnification setting, it is necessary to
re-adjust the image sharpness using the centre focusing wheel (6).
Mounting the binoculars on a tripod
Your binoculars have a threaded tripod connection (9) built in. The required tripod adapter is available as an optional accessory (Art. No. 19-16000 or 19-16500). With this accessory, you are able to mount your binoculars on a tripod with a DIN mounting thread (e.g. Art. No. 49-22100).
TIPS on cleaning
- Lenses (eyepieces and object lenses) should be cleaned with a soft, lint-free cloth (e.g. microfi-bre) only. Do not use excessive pressure – this may scratch the lens.
- Dampen the cleaning cloth with a spectacle cleaning fluid and use it on very dirty lenses.
- Protect the device against dirt and dust. Leave it to dry properly after use at room temperature. Then put the dust caps on and store the device in the case provided.
Warranty & Service
The regular guarantee period is 2 years and begins on the day of purchase. To
benefit from an extended voluntary guarantee period as stated on the gift box,
registration on our website is required.
You can consult the full guarantee terms as well as information on extending
the guarantee period and details of our services at
www.bresser.de/warranty_terms.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>