UNEEKOR Swing Optix Cameras Software

Product Information

Specifications:

• USB 3.0 Cable (3)
• Camera (2)
• Camera Lens (2)
• Accessories (2 sets)

Product Usage Instructions

Camera Installation:

1. STEP ONE: Find the camera, bracket, and the 4 screws.
2. STEP TWO: Screw in the 4 screws through the bracket onto the camera.
3. STEP THREE: Attach the camera with the bracket to the tripod stand. Rotate the camera 90 degrees and attach the USB 3.0 power cable. Secure the cable to one of the tripod legs.
4. STEP FOUR: Connect the USB 3.0 power cable to a USB 3.0 port on your PC. Ensure the power indicator on the cameras is blinking.

Install Uneekor Launcher:

1. STEP ONE: Download and install the Uneekor Launcher from the provided link.
2. STEP TWO: Create a Uneekor account to register and manage your products.

Register and Selection:

1. STEP ONE: Select Devices on the navigation bar.
2. STEP TWO: Register the cameras to add them to your account.
3. STEP THREE: Select the cameras and ensure they are available in-game.
4. STEP FOUR: Navigate to the Start tab to use your cameras.

Lighting Environment:
In addition to normal room lighting, use 8-15W LED bulbs for optimal performance. Angle lights away from the projector path.

Frequently Asked Questions (FAQ):

Q: What should I do if a part is missing from the package?
A: If any part is missing, please contact support for assistance.

INCLUDED ITEMS

The following items are included in the package. Please make sure they are all present and accounted for.

NOTE:
If any part is missing, please contact support.

CAMERA INSTALLATION

• STEP ONE
  Please find the camera, bracket, and the 4 screws that came with the package.

• STEP TWO
  Screw in the 4 screws through the bracket onto the camera.

• STEP THREE
  Attach the camera with the bracket to the tri pod stand. The camera will need to be rotated 90 degrees as shown in the photo. Attach the USB 3.0 power cable to the camera. It is recommended to tie the USB 3.0 power cable to one of the legs of the tri pod.

• STEP FOUR
  Connect the other end of the USB 3.0 power cable directly to a USB 3.0 port on your PC. Please confirm you see the light blinking next to the “Power” text on the cameras.

NOTE:
The cameras will heat up to 43 – 46 degree Celcius. This is normal operating temp

INSTALL UNEEKOR LAUNCHER

If Uneekor Launcher is installed. Skip this section

• STEP ONE
  Download and install the Uneekor Launcher from the Uneekor Resources page linked HER

• STEP TWO
  Create a Uneekor account to register your products and manage your products. You can create an account from the link in the Uneekor Installer or from the link HERE

REGISTER AND SELECTION

• STEP ONE
  Select Devices on the left navigation bar

• STEP TWO
  Select Register your account in the Accessory Devices section for the cameras that you would like to add to your account

• STEP THREE
  Once the cameras have been registered, make sure to select the cameras to ensure they will be available in-game

• STEP FOUR
  Once the cameras have been selected, navigate to the Start tab, and your cameras will be on the top of the screen letting you know that they are ready for use

LIGHTING ENVIRONMENT

Besides your normal background room lighting, additional lighting is required to optimize the Swing Optix. It is recommended to add a minimum of 8 15W or higher, non-flickering LED light bulbs on a track rail with fixtures. This will help with exposure and eliminate blurring of the club.
Ex: 11 nonflickering LEDs were used in the environment below.

LED Bulb Recommendations

1

| Brand| Where to Buy?| Model| LED Wattage| Wattage Rep.| Lumens| Light Appear.| Dimmable
---|---|---|---|---|---|---|---|---
Philips| Amazon| 5967531U0| 8.5W| 65W| 750| 2700K| Y
2| Philips| Amazon| 9290023277| 8.5W| 60W| 800| 2700K| Y
3| Philips| Amazon| 9290011531A| 7W| N/A| 500| 2700K| Y
4| Philips| Amazon| 9290013221| 10W| 75W| 850| 3000K| Y
5| Touchstar| Amazon| PAR30S| 12W| 75W| 840| 3000K| Y

Note : The LED bulbs on this list have been tested with Uneekor Swing Optix cameras under a 15’ x 10’ enclosure using Uneekor QED and EYE XO hardware. These bulbs demonstrated minimal flickering during operation to not impede Swing Optix camera’s performance. If you’re still experiencing issues with the selected bulbs on this list, please contact support@uneekor.com for further assistance. Thank you.

Projectors

The following compatible projectors have been approved by Uneekor to function properly with Swing Optix cameras. If you experience issues with the selected projector(s) on this list, please contact support@uneekor.com for further assistance. Thank you.

SWING OPTIX CONFIGURATION

• STEP ONE
  Open the View software. Proceed onto the main home screen of the View software.

• STEP TWO
  Click on the “Swing” tab in the navigation column on the left side.

• STEP THREE
  Inside the “Swing” tab, click on the “Settings” button on the top right of the screen. Next, click on the “Optix” tab to open the Swing Optix cameras

• STEP FOUR
  You can make adjustments to the camera’s Exposure, Gamma, Brightness, and Contrast in this menu. This is dependent on your lighting environment.
  You are now finished.

MASTER YOUR PASSION
Uneekor, Inc 15770 Laguna Canyon Road, Unit 100 Irvine, CA 92618
sales@uneekor.com
support@uneekor.com
Uneekor © 2023 All Rights Reserved

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>