UNEEKOR EYE XO SIG12 Golf Simulator Package Installation Guide

UNEEKOR EYE XO SIG12 Golf Simulator Package

Product Information

The product is a sensor bar that requires a LAN cable (Ethernet)  to connect to a PC. The LAN cable should be directly connected to the back Ethernet port on the PC and not to a USB adapter or hub.The product comes with a network setup guide and requires the sensor bar to be powered on before starting the setup process.

Product Usage Instructions

1. Ensure that the sensor bar is powered on and connected to your PC with the LAN cable provided in the shipping box.
2. Type Control Panel in the search bar on the bottom left of your tool bar and click on the app.
3. In the Control Panel window, find and click on the Network and Internet icon, then click on the Network and Sharing Center icon.
4. In the Network and Sharing Center window, find and click on the Change Adapter Settings option (Located in the left side column).
5. After clicking Change Adapter Settings, you will see the Network Connections window. In this window, right-click the Ethernet icon and click the Properties option.
6. In the Ethernet Properties window, scroll down and click on Internet Protocol Version 4 (TCP/IPv4) once to highlight it. Then click the Properties button.
7. In the Internet Protocol Version 4 (TCP/IPv4) properties window, click the Use the following IP address circle and type in 172.16.1.100 in the IP address row. Next, click on the Subnet Mask row, and it should automatically change it to 255.255.0.0.
8. Lastly, click OK on the bottom right to complete the network setup process.

Tech Requirements

It is important before you start the network setup process, that you have the sensor bar powered on and connected to your PC with the LAN cable provided to you in the shipping box.
Make sure the LAN cable is DIRECTLY connected to your PC in the back Ethernet port. Do NOT have it connected to the USB Adapter or a hub.

Sensor LAN Cable (Ethernet) PC

Setup

1. Type “Control Panel” in the search bar on the bottom let of your tool bar and click on the app.
2. In the Control Panel window, find and click on the “Network and Internet” icon, then click on the “Network and Sharing Center” icon.
3. In the Network and Sharing Center window, find and click the “Change Adapter Settngs” option. (Located in the left side column).
4. After clicking “Change Adapter Settings” you will see the “Network Connections” window. In this window right click the “Ethernet” icon and click the “Properties” option.
5. In the “Ethernet Properties” window, scroll down and click on “Internet Protocol Version 4 (TCP/IPv4)” once to highlight. Then click the “Properties.”
6. In the “Internet Protocol Version 4 (TCP/IPv4)” properties window click the “Use the following IP address” circle and type in 172.16.1.100 in the IP address row. Next click on the “Subnet Mask” Row and it should automatically change it to 255.255.0.0
7. Lastly, click “Ok” on the bottom right and the network set up is complete.

MASTER YOUR PASSION

Uneekor, Inc.
15770 Laguna Canyon Rd Suite 100 Irvine,
Ca 92618
Tel: 1-949-328-7790
sales@uneekor.com
support@uneekor.com
Uneekor © 2023 All Rights Reserved

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>