Yuposl YPF03 Mushroom Smart WiFi Control Automatic Pet Feeder User Manual

YPF03 Mushroom Smart WiFi Control Automatic Pet Feeder

Specifications

• Product Name: 5G Band Indoor Router
• Model Number: XYZ-123
• Frequency Band: W52 (5G Band)
• Usage: Indoor Use Only
• Compliance: FCC’s RF Exposure Guidelines, ISED Canada
• Minimum Distance: 20cm from the body

Installation

1. Place the router in a central location within your indoor space.
2. Ensure that the router is at least 20cm away from any person’s body.
3. Connect the router to a power source and turn it on.
4. Follow the manufacturer’s instructions for initial setup and configuration.

Operation

1. Avoid placing any other antennas or transmitters in close proximity to the router.
2. Ensure the router is not co-located with any other transmitting devices.
3. Regularly check and update the router’s firmware for optimal performance.
4. Refer to the user manual for troubleshooting steps in case of connectivity issues.

Maintenance

1. Clean the router regularly to prevent dust buildup that can affect performance.
2. Avoid exposing the router to extreme temperatures or humidity levels.
3. If experiencing any technical issues, contact customer support for assistance.

FAQ

1. Q: Can this router be used outdoors?
   A: No, this router is designed for indoor use only, specifically in the 5G band (W52).

2. Q: What is the recommended distance between the router and the body?
   A: The router should be installed and operated with a minimum distance of 20cm from the user’s body to maintain compliance with FCC’s RF Exposure guidelines.

3. Q: How often should the router’s firmware be updated?
   A: It is recommended to regularly check for firmware updates and install them as they become available to ensure optimal performance and security.

IN THE BOX

PRODUCT OVERVIEW

INDICATORS AND BUTTONS

Indicators

Buttons

GETTING STARTED

Installation

1. Press the release button to open the lid, put in the desiccant bag.

2. Add food to the tank.

3. Lock the lid securely.

4. Install the stainless steel bowl and bowl tray.

Power On Dual
Power Modes

1. Connect the power cable and install the batteries as a backup in case of power cuts.
2.  When the feeder is only powered by batteries, the WiFi indicator turns off, and the device automatically disconnects from the network. The feeding plan still works normally.

Power OFF
Unplug the power cable and remove the batteries.

USING THE APP
Notes The device supports 2.4GHz & 5GHz WiFi network. The ideal range is within 6 meters/19.7 feet without obstacles and walls.

System Requirement
iPhone on iOS 10.0 or later; smartphone on Android 5.0 or later

Download the APP

1. Scan the QR code or search Pet Zero in App Store or Google Play.
2. Slgn up and log ln to your Cilunt
   

Add the Device

1. Tap Add Device or the + icon in the top right corner.
   

2. Tap Add to add the device discovered.

3. Enter your WiFi account and password.
   

4. The device is successfully connected. Tap Done to enter the App homepage.

Add the Feeder via Hotspot Mode (Backup option)

1. Open the App, tap Add Device or the + icon in the top right corner.
   

2. Choose to add manually: Pet Feeder-AP mode.

3.  Enter your WiFi account and password.

4. Tap NEXT.

5.  Tap Go to Connect, and then connect your phone to the device’s hotspot: Smartlife-XXX.
   

6. Go back to the App and connect the device.

7. The device is successfully connected. Tap Done to enter the App homepage.

Set the Feeding Plan

1. On the App homepage, tap Meal Plan first
   

2. Then tap Add.

3. Then set the feeding time, the repeat cycle (from Monday to Sunday), and feeding portions.
   

4. Tap Add to set more feeding plans.

Notes: The feeder supports up to 15 feeding plans, each feeding plan supports up to 16 portions.

Manual Feeding
Choose a feeding portion and tap Feed.

Check the Feeding Records

Tap Feed Record to check the feeding records.

Other Settings
Tap the Setting icon to set the times the meal call play, turn on/off the WiFi indicator, set the manual feeding portion, check the battery status and device working status.

Notes:

1. The times the meal call play can be set from 0 to 5. Zero means no recording playback during feeding.
2. Manual feeding portions can be selected from 0 to 16. For example, selecting 2 means 2 portions of food will be dispensed during manual feeding.

How to Reset the Device

Reset Method| Feeding Plan| Recording| Feeding Record
---|---|---|---
Reset button on the machine| Erase| Erase| Keep
Disconnect| Erase| Erase| Keep
Disconnect and wipe data| Erase| Erase| Erase

• Method A. Press and hold the reset button on the feeder for 3-4 seconds to reset the device. Method
• Method B. On the App homepage, tap the Edit icon in the top right corner, tap Remove Device, choose Disconnect or Disconnect and wipe data.

Recommended Feeding Plan

Model| Daily Intake| Meals per Day| Portions per Meal| Per Portion
---|---|---|---|---
YPF03| 1/2 cup| 2| 6|

1/24cup (10.4 ml)

3| 4
4| 3
1/3 cup| 2| 4
3| 3 3 2
4| 2
2/3 cup| 2| 8
3| 5 5 6
4| 4
3/4 cup| 2| 9
3| 6
4| 4 4 5 5
9/10 cup| 2| 11
3| 7 7 8
4| 5 5 6 6
1 cup| 2| 12
3| 8
4| 6
11/4 cup| 2| 15
3| 10
4| 7 7 8 8
11/2 cup| 3| 12
4| 9
11/3 cup| 2| 16
3| 10 11 11
.4,| 8
12/3 cup| | 13 13 14
4| 10

CLEAN AND CARE

1. Remove the food tank, stainless steel bowl and bottom tray.

2. Rinse the food tank and stainless steel bowl, detergent can be used, wipe dry or air dry the parts before use.

3. Do not wash the base with water, use a dry or wet cloth to clean.

Notes

1. Unplug before cleaning.
2. Do not wash or soak the feeder base in water, as the base contains electronic components.
3. To keep food from moisture, air dry or wipe dry all parts after cleaning.
4.  For the health of pets, rinse it thoroughly if detergent is used for cleaning.
5. To keep food fresh, replace the desiccant once a month.

TROUBLESHOOTING

Problem

|

Solution

---|---
The food won’t come out.|

1. Please make sure the food in the tank is dry, and food size is within 2-1Smm/ 0.07-0.6 inches in diameter.
2. Check if the chute inside is blocked, if blocked, remove the food tank, and then remove the blockage.
3. Check whether the battery level is low, whether the power adapter is connected, whether power outage occurs when the power adapter is connected and batteries are not installed.

The food amount of each portion is not the same.| The first few protions may vary, but it doesn’t mean it’s faulty. After about 6 feedings, it should be almost even.
The device is unable to connect to the network.|

1. Check the WiFi password to ensure it is entered correctly.
2. Move your phone and the feeder closer to the router to ensure a strong network signal.
3. Follow the App connection instructions in the user manual.
4. Reset the device and try connecting to the network again.

The Wi-Fi connection drops or disconnects frequently.|

1. Place the feeder near the router (within 6m/19.7in), no obstacles or walls.
2. Ensure the power cord is properly connected.
3. Check if your home network is disconnected.
4. Reset the device and try connecting to the network again.

SPECIFICATIONS

4L: 315x314xl 6Bmm/l 2.4xl 2.3×6.6in
Weight| 2L: 1090g/2.40lbs
4L:1203g/2.65lbs

SAFETY INSTRUCTIONS

• Dispose of all packaging materials properly. Some items may be packed in plastic bags; these bags could cause suffocation. Keep them away from children and pets.
• Do not use the feeder with pets that are not able to reach the food tray or with any physical disability.
• Do not immerse the base part in water at any time as it may damage electronic components like the control panel.
• Do not use the feeder outdoors. Check its operation frequently to be sure it is dispensing properly.
• Do not use wet, canned or moist food.
• Do not disassemble the feeder other than as instructed in this user manual.
• Only use accessories recommended or sold by the manufacturer. The use of accessories not recommended or sold by the manufacturer may cause an unsafe condition.
• Do not modify the pet feeder.
• Examine the feeder after installation. Do not plug in if there is water on the power cable or plug.
• To avoid tripping, always position the power cable out of the way of foot traffic.
• Do not install or store the pet feeder where it will be exposed to weather or temperatures below 4°C (39.2°F).
• Use D alkaline batteries to power the feeder. Do not use rechargeable batteries.
• Check the batteries regularly. Before leaving for an extended period of time, always replace batteries with new ones.
• Do not lift the pet feeder by the lid, food tank, or food bowl. Lift and carry it using both hands and the base, while keeping the feeder in an upright position.
• Suitable for dry food only, with kibble sizes ranging from 2-15mm (0.07-0.6in) in diameter. Larger kibble may get stuck at the food outlet .
• Do not put your fingers into the food outlet or let your fingers touch the rotor.
• Power off the device when it’s not in use.

WARRANTY

• 12-month warranty

NOTICE

Note: 5G band (W52) indoor use only.

FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20cm the radiator your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

ISED Canada Statement:
This device contains licence-exempt transmitter(s)/receiver(s)/ that comply with Innovation Science and Economic Development Canada’s licence-exempt RSS(s).

Operation is subject to the following two conditions

1. This device may not cause interference and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Radiation Exposure
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment; To maintain compliance with IC’s RF Exposure guidelines, This equipment should be. installed and operated with minimum distance of 20cm the radiator your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

CAN ICES-3(B)NMB-3(B) FCC ID: 2BCEO-YPF03
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>