FENIX LR80R Spotlight Rechargeable 8000 Lumen Instruction Manual

: June 9, 2024
: FENIX

Table of Contents

SAFE USE WARNINGS
(ENGLISH) FENIXLR8OR FLASHLIGHT
OPERATING INSTRUCTION
CHARGING
POWER BANK FUNCTION
BATTERY LEVEL INDICATION
INTELLIGENT BRIGHTNESS DOWNSHIFTING SENSOR
INTELLIGENT OVERHEAT PROTECTION
LOW-VOLTAGE WARNING
USAGE AND MAINTENANCE
INCLUDED
TECHNICAL PARAMETERS
DIMENSIONS
CUSTOMER SERVICE
Read User Manual Online (PDF format)
Download This Manual (PDF format)

FENIX LR80R Spotlight Rechargeable 8000 Lumen

SAFE USE WARNINGS

Do place this light out of the reach of children!
Do NOT shine the light directly into the eyes of anyone!
Do NOT shine flammable objects at close range, to avoid burning objects or causing danger due to high temperature!
Do NOT use the light in inappropriate ways such as biting in the mouth, to avoid personal injury or life threats when the light or internal battery fails!
This light will accumulate a lot of heat while working, resulting in a high temperature of the flashlight shell. Pay attention to safe use to avoid scalding.
Turn off and lock the light or remove the battery from the light to prevent accidental activation when the light is placed in a closed and flammable environment such as pockets and backpacks!
The LED of this flashlight is not replaceable; so the whole light should be replaced when the LED reaches the end of its life.

(ENGLISH) FENIXLR8OR FLASHLIGHT

18000 lumens maximum output; 1130 meters maximum beam distance.
6 Luminus SST70 LEDs with a lifespan of 50,000 hours.
Built-in a 7.2V/12000mAh Li-ion battery pack.
Dual switch respectively controls dual mode.
Detachable handheld handle meets various lighting demands.
USB Type-C 45W fast charging; 4 hours for full charging.
Intelligent brightness downshifting sensor to avoid high temperature at close-range lighting.
Made of durable A6061-T6 aluminum. Premium type HAITI hard-anodized anti-abrasive finish.
Size: 10.20″ x 4.25″ x 2.13″ / 259 x 108 x 54 mm. 0 Weight: 57.71 oz / 1636 g (including battery).

OPERATING INSTRUCTION

Switches
The right switch is the main (right) switch for on/off, output selection and instant turbo on high-output mode. The left switch is the auxiliary (left) switch for on/off, output selection, strobe and SOS on low-output mode.

On/off
Press and hold either of the switches for 0.5 seconds to turn on/off the light.

Mode Switching
In high-output mode, single click the auxiliary (left) switch to enter the previously used output on low-output mode; press and hold the auxiliary (left) switch for 1.2 seconds to enter strobe. In low-output mode, single click the main (right) switch to enter the previously used output on high-output mode; press and hold the main (right) switch for 1.2 seconds to enter turbo. Output Selection In high-output mode, single click the main (right) switch to cycle through Low—Ned,High—Jurbo. In low-output mode, single click the auxiliary (left) switch to cycle through Eco,Low—Ned,High. Press and hold the auxiliary (left) switch to cycle through Strobe—SOS.

Instant Turbo / Strobe / SOS

With the light switched off and unlocked, press and hold the main (right) switch for 1.2 seconds to enter instant turbo, single click the main (right) switch once again to enter previously used output on high-output mode. With the light switched off and unlocked, press and hold the auxiliary (left) switch for 1.2 seconds to enter strobe, single click the auxiliary (left) switch once again to cycle through Strobe—}SOS. Lockout Function Lock: With the light switched off and unlocked, simultaneously press the two switches for 3 seconds, the light will blink 2 times on Eco to indicate locked status. Unlock: With the light locked, simultaneously press the two switches for 3 seconds, the light will be activated on Eco. ” In locked status, clicking or pressing the switches will activate 2 one-second blinks to indicate locked status. Intelligent Memory Circuit The light memorizes the last selected output excluding strobe and SOS. When turned on again the previously used output will be recalled. The light does not memorize strobe and SOS, press and hold the auxiliary (left) switch to enter strobe.

CHARGING

First switch off the light and open the anti-dust cap, plug the USB Type-C socket of the charging cable into the light, then connect one side of the 2-in-1 end (USB A or USB C ) of the charging cable into the included adapter.
When charging, the charging indicators will flash from left to right to display charging status. The five indicators will be constant-on after charging is complete.
Be sure to close the anti-dust cover once charging is completed.

Note:

The USB Type-C port of the light body only supports charging, and the USB A port only supports discharging.
If the USB A side of the 2-in-1 end of the charging cable is connected to the USB A port of the adapter, it supports 12W (5V/2.4A) charging.
If the USB C side of the 2-in-1 end of the charging cable is connected to the USB C port of the adapter, it supports 45W fast charging.

POWER BANK FUNCTION

1. Switch off the light and plug the USB A socket of the charging cable into the light, then connect the USB Type-C socket of the charging cable to the digital device with a USB Type-C port. 2. Single click either of the switches to begin discharging, the indicators will recede from right to left to display the status. 3. Be sure to close the anti-dust cover once charging is completed. Note:1. Only Eco mode is available when charging, while all modes are avail-able when discharging. 2. The normal charging time is approximately 4 hours from depletion to full charging, with the included 45W adapter. 3. Recharge a stored light every four months to maintain optimum performance of the battery.

BATTERY LEVEL INDICATION

With the light switched off, single click either switch to check the battery status, which will last for 3 seconds. Five blue lights on: 100% – 80% Three blue lights on: 60% – 40% One blue light on: 20% – 0
Four blue lights on: 80% – 60% Two blue light on: 40% – 20%

INTELLIGENT BRIGHTNESS DOWNSHIFTING SENSOR

The flashlight has a built-in intelligent sensing circuit. When the light head is close to an illuminated object (about 60mm) for more than 1.5 seconds, the flashlight will automatically downshift the brightness level to Eco to avoid danger caused by high temperature. When the light head is away from the illuminated object for more than 0.8 seconds, the flashlight automatically recalls the previously used output level. Note: 1. As objects of different materials and colors reflect differently to light, there may be slight deviations in the sensing distance. 2. Due to the principle of infrared sensing, it is normal for the flashlight to automatically downshift to Eco mode when being used under strong sunlight. Turning on/off Intelligent Brightness Downshifting Sensor

On: With the light unlocked and switched off, press and hold the right switch over 10 seconds, the light will flash once and then will constantly light up at the previously used mode, indicating the sensor function is abled.
Off: With the light unlocked and switched off, press and hold the right switch over 10 seconds, the light will flash twice and then will constantly light up at the previously used mode, indicating the sensor function is disabled.
The sensor function is factory set to ON.

INTELLIGENT OVERHEAT PROTECTION

The light will accumulate a lot of heat when used at high-output mode for ex- tended periods. When the light reaches a temperature of 60°C or above, the light will automatically step down a few lumens to reduce the temperature. When the temperature drops below 60°C, it will then allow the user for the reselection of the mode.

LOW-VOLTAGE WARNING

Working at high-output mode, when the voltage level drops below the preset level, the flashlight is programmed to downshift to a lower brightness level until Low output of high-output mode is reached. When this happens in Low output mode, the flashlight will automatically downshift to High output of low-output mode.
Working at low-output mode, when the voltage level drops below the preset level, the flashlight is programmed to downshift to a lower brightness level until Eco output is reached. When this happens in Eco output mode, the leftmost battery level indicator constantly blinks blue to remind you to timely recharge the battery.

USAGE AND MAINTENANCE

Disassembling the sealed head can cause damage to the light and will void the warranty.
Lock the light to prevent accidental activation during storage or transportation. Recharge a stored battery every four months to maintain optimal battery performance.
Long-term use can result in 0-ring wear. To maintain a proper water seal, replace the ring with an approved spare
Periodic cleaning of the battery contacts improves the light’s performance as dirty contacts may cause the light to flicker, shine intermittently or even fail to illuminate for the following reasons:
A: Poor battery level. Solution: Recharge battery.
B: The threads, PCB board contact or other contacts are dirty.
Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol. If the above methods don’t work, please contact your authorized distributor.

INCLUDED

Fenix LR8OR flashlight, Charging adapter, USB Type-C charging cable, Shoulder strap, Hanging ring screw, Spare 0-ring, User manual, Warranty card

TECHNICAL PARAMETERS

ANSI/PLATO FL1	High-Output Mode	Low-Output Mode
Turbo	High	Med
OUTPUT	18000
lumens	12000
lumens	6000
lumens	300
lunliens	1000
lumens	450
lumens	150
lumens	50
lumens	6000
lumens	150

Note: According to the ANSI/PLATO FL1 standard, the above specifications are from the results produced by Fenix through its laboratory testing using the 7.2V/12000mAh rechargeable battery pack, under the temperature of 21±3°C and humidity of 50% – 80%. The true performance of this product may vary according to different working environments. “The Turbo output is measured in a total of runtime including output at reduced levels due to temperature or protection mechanism in the design under a good heat dissipation environment.

DIMENSIONS

CUSTOMER SERVICE

FACEBOOK

WECHAT

“Follow” us for more information about Fenix.

FENIXLIGHT LIMITED

Tel: +86-755-29631163/83193 Fax: +86-755-29631181
E-mail: Info@fenixlight.com
Web: www.fenixlight.com
Address: 2F/3F, West of Building A, Xinghong Technology Park, 111 Shuiku Road, Fenghuanggang Community, Xixiang Street, Bao’an District, Shenzhen City, Guangdong Province, China