V-TAC VT-6436 LED Panel User Manual

V-TAC VT-6436 LED Panel

Specifications

• Model: VT-6436
• SKU: 216706, 216707, 6972
• Watts: 36W
• Lumens: 4320LM
• Beam Angle: Not specified
• CRI: 80
• DF: 0.9
• Life Span: 30,000 hours
• On/Off Cycle: >15,000 times
• Operation Temperature: Not specified
• Input Power: AC: 220-240V 50/60Hz
• IP Rating: IP20
• Dimension: 595x595x33mm

Product Usage Instructions

1. Make a hole into the ceiling where you want to install the LED panel.
2. Fix the panel securely into the ceiling using appropriate mounting hardware.
3. Remove the lid of the panel to access the wiring connections.
4. Connect the panel to the power supply following the wiring instructions provided.
5. Recover the lid after ensuring all connections are secure.
6. Turn on the switch to test if the fixture light turns on properly.

FAQ :

1. What should I do if the LED panel does not turn on after installation?
   If the LED panel does not turn on after installation, first check the power supply and connections. Ensure that the wiring is correct and secure. If the issue persists, contact customer support for assistance.

2. Can I install the LED panel in a bathroom or outdoor area?
   No, this LED panel is rated IP20, meaning it is only suitable for indoor use and should not be exposed to water or moisture. Avoid installing it in areas with high humidity or direct water contact.

3. How do I clean the LED panel?
   To clean the LED panel, switch it off and allow it to cool down. Use a soft, dry cloth to gently wipe the surface of the panel. Avoid using abrasive cleaners or solvents that may damage the finish.

INSTRUCTION MANUAL

LED PANEL

INTRODUCTION & WARRANTY

Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 5 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
WARNING!

1. Please make sure to turn off the power before starting the installation.
2. Installation must be performed by a qualified electrician.
3. The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
4. If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
5. For Indoor use only
6. Proper grounding should be ensured throughout the installation.

IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B

• This marking indicates that this product should not be disposed of with other household wastes.
• Caution, risk of electric shock.
• Luminaires not suitable for covering with thermally insulating material.

‘This product contains a light source of energy efficiency class ’, where