VALAVA PL-32X LED Wash Lights Bar User Manual
- May 15, 2024
- VALAVA
Table of Contents
VALAVA PL-32X LED Wash Lights Bar
Product Information
Specifications
- LED Wash: 12x3W 3IN1 RGB LED
- LED Beam: 12x3W Warm White LED
- Modes: Auto mode, DMX mode, Sound mode
- Programming: Self-walking mode, running all effects randomly
- Channels: 4 CH, 6 CH, 11 CH, 48 CH, 54 CH
- Color Range: R000-255, G000-255, B000-255
- Beam Brightness Adjustment: W (0-100%)
- Static Colors: 37 available
Frequently Asked Questions
- Q: How do I change between different modes on the lighting system?
- A: To switch between Auto, DMX, and Sound modes, use the corresponding buttons on the console or controller provided with the system.
- Q: Can I program custom shows or effects with this lighting system?
- A: Yes, you can create custom shows by adjusting the speed, strobe, and color settings in the programming menu. Follow the user manual for detailed instructions.
At first,thank you for purchasing the device. For the sake of safety and regular operation of this projector,please read this manual carefully before using and operating it in order to avoid any personal injury or damage to the device.
WARNING
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP!
CAUTION: Keep this equipment away from rain, moisture and liquids.
SAFETY INSTRUCTIONS
Every person involved with the installation, operation & maintenance of this equipment should:
- Be competent
- Follow the instructions of this manual
CAUTION: Take care using this equipment!
high voltage-risk of electric shock!!
Before your initial start-up, please make sure that there is no damage caused during transportation. Should there be any, consult your dealer and do not use the equipment. To maintain the equipment in good working condition and to ensure safe operation, the user must follow the safety instructions and warning notes written in this manual.
Please note that damages caused by user modifications to this equipment are not subject to warranty.
Operation Instructions
Digital Display Operate
Illustration part:
- A. MENU
- B. UP
- C. DOWN
- D. ENTER
Operation Instructions
- After starting press A (MENU) Enter into main-menu,
- Press B (UP) and C (DOWN) to select the submenu, and then press D(ENTER) to ensure.
| Mode | Programming | Description |
|---|---|---|
| Auto mode |
Auto
| Sp 1-10| Auto Speed 1-10| Self-walking mode,running all effects randomly
St 0-9| Strobe( from slow to| fast)
DMX mode
|
Addr
| 4 CH| A001-A509|
Each channel mode is a separate address. Plug in the console and automatically enter DMX mode
6 CH| A001-A507
11CH| A001-A502
48CH| A001-A465
54CH| A001-A459
Show
|
Shou
|
Sh 1-3
|
Program Show 1-3
| Effect 1:Collection of dyeing effects
Effect 2:A Collection of beam effects
Effect 3:Dyeing+ beam effects
Sp 1-10| Program Speed 1-10 (from slow to fast)
St 0-9| Program Flash 0-9 (from slow to fast)
Sound mode| Soud| Sou 1-3| Sen1-9| 3 voice control modes, adjustable
sensitivity
Slave| SLAV| Sl ave| Slave( slave, automatically identify master)
Edit color
|
Col o
| R000-255| Red (0-100%) red adjustment
G000-255| Green (0-100%) green adjustment
B000-255| Blue (0-100%) blue adjustment
U000-255| W (0-100%) beam brightness adjustment
St 0-9| LED Strobe (from slow to fast)
Static colors
|
St At
| CL01-CL37| Static color (37 static colors available)
St 0-9| LED Strobe (from slow to fast)
Product Set
|
Set
|
Dis
| 10s|
Set the backlight time of the display panel panel from 10 seconds to continuous lighting,and the factory default is 10 seconds
20s
30s
60s
On
TemP
|
50-60℃
| Protection temperature setting, protection within the range of 50-60℃ beyond this range, start to reduce output power
Dir
| –>| Set the light direction to the right
<–| Set the light direction to the left
InFr
| On| Remote control function setting on
OFF| Remote control function setting off
Send
| Yes| Send with one key setting,and the channel mode of all lamps is the
channel mode of the current host
Send
Information
|
Info
| Ver| VVxx| Soft version software version number
Temp| XX c| Current lamp panel temperature (degrees Celsius), if the
temperature detection circuit fails, boot prompt-RT-, menu display error
DMX channel table
DMX MODE 1: 4CH
| CH1 | 0-255 | ALL RED(0-100%) |
|---|---|---|
| CH2 | 0-255 | ALL GREEN(0-100%) |
| CH3 | 0-255 | ALL BLUE (0-100%) |
| CH4 | 0-255 | ALL W (0-100%) |
DMX MODE 2: 6CH
| CH1 | 0-255 | Total Dimmer |
|---|---|---|
| CH2 | 0-9 | No Function |
| 10-255 | From Slow to fast | |
| CH3 | 0-255 | ALL RED (0-100%) |
| CH4 | 0-255 | ALL GREEN (0-100%) |
| CH5 | 0-255 | ALL BLUE (0-100%) |
| CH6 | 0-255 | ALL W (0-100%) |
DMX MODE 3: 11CH
| CH1 | 0-255 | Total Dimmer |
|---|---|---|
| CH2 | 0-255 | ALL RED (0-100%) |
| CH3 | 0-255 | ALL GREEN (0-100%) |
| CH4 | 0-255 | ALL BLUE (0-100%) |
| CH5 | 0-255 | ALL W (0-100%) |
| CH6 | 0-9 | No Function |
| 10-255 | From Slow to fast |
CH7
| 0-3| CH2-CH4controls overall color|
RGB Effect Channel
4-7| Pattern 1(CH2-CH4 can control pattern color)
8-11| Pattern 2(CH2-CH4 can control pattern color)
,,,| ,,,
148-151| Pattern 37(CH1-CH4 can control pattern color)
152-155| Pattern 38 (built – in effect color)
156-159| Pattern 39 (built – in effect color)
,,,| ,,,
224-227| Pattern 56 (built – in effect color)
228-231| Self – walking effect (loop runing pattern effect 1-56)
232-235| Voice Mode 1 (Ch10 Channel Failure)
236-239| Voice Mode 2 (Ch10 Channel Failure)
240-255| Voice Mode 3 (Ch10 Channel Failure)
CH8| 0-255| RGB Program Speed (From Slow to fast) Effect Speed
CH9| 0-255| RGB Background color selection(see the final background color
table for details)
CH10
| 0-6| CH5 controls overall brightness|
W-beam effect channel
7-13| Built-in effect 1
14-20| Built-in effect 2
,,,| ,,,
231-237| Built-in effect 39
238-255| Self-walking effect (cycle running built-in effect 1-33)
CH11| 0-255| W Program Speed (From Slow to fast) Effect Speed
DMX MODE 4: 48CH
| CH1 | 0-255 | R 1 (0-100%) |
|---|---|---|
| CH2 | 0-255 | G 1 (0-100%) |
| CH3 | 0-255 | B 1 (0-100%) |
| CH4 | 0-255 | R 2 (0-100%) |
| CH5 | 0-255 | G 2 (0-100%) |
| CH6 | 0-255 | B 2 (0-100%) |
| ,,, | ,,, | ,,, |
| CH34 | 0-255 | R 12 (0-100%) |
| CH35 | 0-255 | G 12 (0-100%) |
| CH36 | 0-255 | B 12 (0-100%) |
| C ,, , H37 | 0-255 | W 1 (0-100%) |
| ,,, | ,,, | |
| CH48 | 0 – 255 | W12 (0 – 100%) |
DMX MODE 5: 54CH
| CH1 | 0-255 | R 1 (0-100%) |
|---|---|---|
| CH2 | 0-255 | G 1 (0-100%) |
| CH3 | 0-255 | B 1 (0-100%) |
| CH4 | 0-255 | R 2 (0-100%) |
| CH5 | 0-255 | G 2 (0-100%) |
| CH5 | 0-255 | B 2 (0-100%) |
| ,,, | ,,, | ,,, |
| CH34 | 0-255 | R 12 (0-100%) |
| CH35 | 0-255 | G 12 (0-100%) |
| CH36 | 0-255 | B 12 (0-100%) |
| C ,, H , 37 | 0- , 2 ,, 55 | W 1 (0-100%) |
| ,,, | ||
| CH48 | 0-255 | W 12 (0-100%) |
| CH49 | 0-9 | No Function |
| 10-255 | From Slow to fast |
CH50
| 0-3| CH2-CH4controls overall color|
RGB Effect Channel
4-7| Pattern 1(CH2-CH4 can control pattern color)
8-11| Pattern 2(CH2-CH4 can control pattern color)
,,,| ,,,
148-151| Pattern 37(CH1-CH4 can control
pattern color)
152-155| Pattern 38 (built – in effect color)
156-159| Pattern 39 (built – in effect color)
,,,| ,,,
224-227| Pattern 56 (built – in effect color)
228-231| Self – walking effect (loop runing
pattern effect 1-56)
232-235| Voice Mode 1 (Ch10 Channel Failure)
236-239| Voice Mode 2 (Ch10 Channel Failure)
240-255| Voice Mode 3 (Ch10 Channel Failure)
CH51| 0-255| RGB Program Speed (From Slow to fast) Effect Speed
CH52| 0-255| RGB Background color selection(see the final background color
table for details)
CH53
| 0-6| CH5 controls overall brightness|
W-beam effect channel
7-13| Built-in effect 1
14-20| Built-in effect 2
,,,| ,,,
231-237| Built-in effect 39
238-255| Self-walking effect (cycle running
built-in effect 1-33)
CH54| 0-255| W Program Speed (From Slow to fast) Effect Speed
ATTENTION
- DANGER OF LIFE! RISK OF BURNS!
- RISK OF FIRE! RISK OF SHORT CIRCUIT!
Connections
DMX Signal Connection
You should find inside the LEDJ carton the following items:
- LED LIGHT
- Power cable
- Instruction manual
Technical Specifications
- DMX Channels: 4/6/10/11/48
- Voltage: AC 110-240V-50/60Hz
- LED Wash: 12x3W 3IN1 RGB LED
- LED Beam: 12x3W Warm White LED
Operating modes
- Static color mode
- Color changing mode
- Color fade mode
- Auto run mode
- Sound active mode
- Master slave mode
- DMX mode
RGB 3in1 Background Color Table
| Value | Color |
|---|---|
| 0-6 | R:000 G:000 B:000 |
| 7-13 | R:51 G:000 B:000 |
| 14-20 | R:102 G:000 B:000 |
| 21-27 | R:153 G:000 B:000 |
| 28-34 | R:204 G:000 B:000 |
| 35-42 | R:255 G:000 B:000 |
| 43-48 | R:000 G:51 B:000 |
| 49-55 | R:000 G:102 B:000 |
| 56-62 | R:000 G:153 B:000 |
| 63-69 | R:000 G:204 B:000 |
| 70-76 | R:000 G:255 B:000 |
| 77-83 | R:000 G:000 B:51 |
| 84-90 | R:000 G:000 B:102 |
| 91-97 | R:000 G:000 B:153 |
| 98-104 | R:000 G:000 B:204 |
| 105-111 | R:000 G:000 B:255 |
| 112-118 | R:51 G:51 B:000 |
| 119-125 | R:102 G:102 B:000 |
| 126-132 | R:153 G:153 B:000 |
| 133-139 | R:204 G:204 B:000 |
| 140-146 | R:255 G:255 B:000 |
| 147-153 | R:51 G:000 B:51 |
| 154-160 | R:102 G:000 B:102 |
| 161-167 | R:153 G:000 B:153 |
| 168-174 | R:204 G:000 B:204 |
| 175-181 | R255 G:000 B:255 |
| 182-188 | R:000 G:51 B:51 |
| 189-195 | R:000 G:102 B:102 |
| 196-202 | R:000 G:153 B:153 |
| 203-209 | R:000 G:204 B:204 |
| 210-216 | R:000 G:255 B:255 |
| 217-223 | R:51 G:51 B:51 |
| 224-230 | R:102 G:102 B:102 |
| 231-237 | R:153 G:153 B:153 |
| 238-244 | R:204 G:204 B:204 |
| 245-255 | R:255 G:255 B:255 |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>