VALAVA LED Wash Lights Bar User Manual
- June 17, 2024
- VALAVA
Table of Contents
WALLWASHER LIGHT BAR
USER MANUAL
LED Wash Lights Bar
Atfirst,thank you for purchasing the device.For the sake of safety and regular
operation of this projector,please read this manual carefully before using and
operating itin order to avoid any personal injury or damage to the device.
bestshowlight@163.com
This is a wall washer light bar is also a pixel light bar
Add the cover to
make it a pixel light
Remove the cover to
make it a beam light 
WARNING
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR
INITIAL START-UP!
CAUTION: Keep this equipment away from rain, moisture and liquids.
SAFETY INSTRUCTIONS
Every person involved with the installation, operation & maintenance of this equipment should:
- Be competent
- Follow the instructions of this manual
CAUTION: Take care using this equipment! high voltage risk of electric
shock!
Before your initial start-up, please make sure that there is no damage caused
during transportation. Should there be any, consult your dealer and do not use
the equipment.
To maintain the equipment in good working condition and to ensure safe
operation, it is necessary for the user to follow the safety instructions and
warning notes written in this manual.
Please note that damages caused by user modifications to this equipment are
not subject to warranty.
Digital display operate:
a). lllustration part:
A.MENU
B.UP
C.DOWN
D. ENTER
Operation Instructions:
After starting press AMENU) Enter into main-menu.
Press B(UP) C(DOWN) to select the submenu and then press D(ENTER) to ensure.
ATTENTION:
DANGER OF LIFE! RISK OF BURNS!
RISK OF FIRE! RISK OF SHORT CIRCUIT!
DMX Signal Connection
3 Pin XLR to 5-Pin XLR Conversion
Conductor| 3-Pin XLR Female(OUT)| 5-Pin XLR Male(IN)
Ground Shield| Pin 1| Pin 1
Data Compliment(-signal)| Pin 2| Pin 2
Data True(+signal)| Pin 3| Pin 3
Not Used| | Pin 4-Do Not Used
Not Used| | Pin 5-Do Not Used
Technical
Specifications:
Voltage:AC110-240V,50/60HZ
Power: 120W
LED: 36LEDsx3W
DMX Channels: 4/6/9/48/52
SETTING MENU LED DISPLAY:
| Mode | Programming | Description |
|---|---|---|
| Auto mode | Auto | Sp 1-10 |
| St 0-9 | Strobe Speed 0-9 (slow->fast) | |
| DMX mode | Addr | 4 CH |
plugged into the console, automatically enter DMX mode
6 CH| A001-A507
9 CH| A001-A504
48CH| A001-A465
52CH| A001-A461
Show| Shou| Sh 1-56| Program Show 1-56
Sp 1-10| Program Speed 1-10 (slow->fast)
St 0-9| Program Flash 0-9 (slow->fast)
Sound Mode| Soud| Soul -2| Sen1-9| Sound active modes 1-2,sound sensitivity
1-9
Slave| SLAV| Slave| Slave (Slave, automatically identify the master)
Edit color| Colo| r000-255| Red (0-100%) Red Dimming
g000-255| Green (0-100%) Green Dimming
b000-255| Blue (0-100%) Blue Dimming
U000-255| White (0-100%) White Dimming
St0-9| LED Strobe (slow->fast)
Static colors| StAt| CL01-CL41| Static Color (41 static colors to choose from)
St0-9| LED Strobe (slow->fast)
Product Set| Set| dis| lOs| Set display board backlight time, 10 seconds to
always on, factory default 10 seconds
20s
30s
60s
on
tenP| 50-65-0| Protection temperature setting,50-65t range protection,more
than this range began to reduce the output power
dir| —>| Chasing direction: right
<—| Chasing direction: left
InFr| | Remote control function setting
Send| yes| One button to set the send function to send the current light
channel mode and temperature protection value to other lights connected to
this light. (No other controller on the line)
Information| Info| ver| VVxx| Software version
tenp| XXC| The current light board temperature (degrees Celsius), if the
temperature detection line failure, power on prompt -RT-, menu display eror
DMXMODE 1:4 CH
| CH1 | 0-255 | ALL RED (0-100%) |
|---|---|---|
| CH2 | 0-255 | ALL GREEN (0-100%) |
| CH3 | 0-255 | ALL BLUE (0-100%) |
| CH4 | 0-255 | ALL WHITE (0-100%) |
DMX MODE 2: 6 CH
| CH1 | 0-255 | Master Dimmer |
|---|---|---|
| CH2 | 0-9 | No Function |
| 10-255 | Slow->Fast | |
| CH3 | 0-255 | ALL RED (0-100%) |
| CH4 | 0-255 | ALL GREEN (0-100%) |
| CH5 | 0-255 | ALL BLUE (0-100%) |
| Ch6 | 0-255 | ALL WHITE (0-100%) |
DMX MODE 3: 9CH
| CH1 | 0-255 | Master Dimmer |
|---|---|---|
| CH2 | 0-255 | ALL RED (0-100%) |
| CH3 | 0-255 | ALL GREEN (0-100%) |
| CH4 | 0-255 | ALL BLUE (0-100%) |
| CH5 | 0-255 | ALL White (0-100%) |
| CH6 | 0-9 | No Function |
| 10-255 | Slow->Fast | |
| CH7 | 0-3 | No Function |
| 4-7 | Pattern Effect 1 (CH2-5 Control the pattern color) | |
| 8-11 | Pattern Effect 2 (CH2-5 Control the pattern color) | |
| ”” | ”” | |
| 148-151 | Pattern Effect 37 (CH2-5 Control the pattern color) | |
| 152-155 | Pattern Effect 38 (Built-in effect colors) | |
| 156-159 | Pattern Effect 39 (Built-in effect colors) | |
| ””’ | ””’ | |
| CH7 | 224-227 | Pattern Effect 56 (Built-in effect colors) |
Channel
228-231| Auto Effect (Cyclic running pattern effect 1-56)
232-235| Sound 1
236-255| Sound 2
CH8| 0-255| RGBW Program Speed (Slow->fast)
CH9| 0-255| RGBW Pattern effect background color selection (see final
background color table for details) /Add background color to pattern effect
1-37, i.e. CH7 4-151
DMX MODE 4: 48CH
| CH1 | 0-255 | R1 (0-100%) |
|---|---|---|
| CH2 | 0-255 | G1 (0-100%) |
| CH3 | 0-255 | B1 (0-100%) |
| CH4 | 0-255 | W1 (0-100%) |
| ””” | ””’ | ””’ |
| CH45 | 0-255 | R12 (0-100%) |
| CH46 | 0-255 | G12 (0-100%) |
| CH47 | 0-255 | B12 (0-100%) |
| CH48 | 0-255 | W12(0–100%) |
DMX MODE 5: 52CH
| CH1 | 0-255 | R1 (0-100%) |
|---|---|---|
| CH2 | 0-255 | G1 (0-100%) |
| CH3 | 0-255 | B1 (0-100%) |
| CH4 | 0-255 | W1 (0-100%) |
| ””’ | ””” | ””’ |
| CH45 | 0-255 | R12 (0-100%) |
| CH46 | 0-255 | G12 (0-100%) |
| CH47 | 0-255 | B12 (0-100%) |
| CH48 | 0-255 | W12 (0-100%) |
| CH49 | 0-9 | No Function |
| 10-255 | Slow->Fast | |
| CHSO | 0-3 | No Function |
| 4-7 | Pattern Effect 1 (CH1-4 Control the pattern color) | |
| 8-11 | Pattern Effect 2 (CH1-4 Control the pattern color) | |
| ””” | ””” | |
| 148-151 | Pattern Effect 37 (CH1-4 Control the pattern color) | |
| 152-155 | Pattern Effect 38 (Built-in effect colors) | |
| 156-159 | Pattern Effect 39 (Built-in effect colors) | |
| ””’ | ””’ | |
| 224-227 | Pattern Effect 56 (Built-in effect colors) | |
| 228-231 | Auto Effect (Cyclic running pattern effect 1-56) | |
| 232-235 | Sound 1 | |
| 236-255 | Sound 2 | |
| CH51 | 0-255 | RGBW Program Speed (Slow->fast) |
| CH52 | 0-255 | RGBW Pattern effect background color selection (see final |
background color table for details) /Add background color to pattern effect 1-37, i.e. CHSO 4-151
RGBW 4in1 Background Color Table:
| Value | Color |
|---|---|
| 0-4 | R:000 G:000 B:000 W:000 |
| 5-9 | R: 51 G:000 B:000 W:000 |
| 10-14 | R:102 G:000 B:000 W:000 |
| 15-19 | R:153 G:000 B:000 W:000 |
| 20-24 | R:204 G:000 B:000 W:000 |
| 25-29 | R:255 G:000 B:000 W:000 |
| 30-34 | R:000 G: 51 B:000 W:000 |
| 35-39 | R:000 G:102 B:000 W:000 |
| 40-44 | R:000 G:153 B:000 W:000 |
| 45-49 | R:000 G:204 B:000 W:000 |
| §0-54 | R:000 G:255 B:000 W:000 |
| §5-59 | R:000 G:000 B: 51 W:000 |
| 60-64 | R:000 G:000 B:102 W:000 |
| 65-69 | R:000 G:000 B:153 W:000 |
| 70-74 | R:000 G:000 B:204 W:000 |
| 75-79 | R:000 G:000 B:255 W:000 |
| 80-84 | R:000 G:000 B:000 W: 51 |
| 85-89 | R:000 G:000 B:000 W:102 |
| 90-94 | R:000 G:000 B:000 W:153 |
| 95-99 | R:000 G:000 B:000 W:204 |
| 100-104 | R:000 G:000 B:000 W:255 |
| 105-109 | R: 51 G: 51 B:000 W:000 |
| 110-114 | R:102 G:102 B:000 W:000 |
| 115-119 | R:153 G:153 B:000 W:000 |
| 120-124 | R:204 G:204 B:000 W:000 |
| 125-129 | R:255 G:255B:000 W:000 |
| 130-134 | R:51G:000B:51W:000 |
| 135-139 | R:102 G:000 B:102 W:000 |
| 140-144 | R:153 G:000 B:153 W:000 |
| 145-149 | R:204 G:000 B:204 W:000 |
| 150-154 | R255 G:000 B:255 W:000 |
| 155-159 | R:000 G: 51 B: 51 W:000 |
| 160-164 | R:000 G:102 B:102 W:000 |
| 165-169 | R:000 G:153 B:153 W:000 |
| 170-174 | R:000 G:204 B:204 W:000 |
| 175-179 | R:000 G:255 B:255 W:000 |
| 180-184 | R:51 G:000B:000 W: 51 |
| 185-189 | R:102 G:000 B:000 W:102 |
| 190-194 | R:153 G:000 B:000 W:153 |
| 195-199 | R:204 G:000 B:000 W:204 |
| 200-204 | R:255 G:000 B:000 W:255 |
| 205-209 | R:000 G: 51 B:000 W: 51 |
| 210-214 | R:000 G:102 B:000 W:102 |
| 215-219 | R:000 G:153 B:000 W:153 |
| 220-224 | R:000 G:204 B:000 W:204 |
| 225-229 | R:000 G:255 B:000 W:255 |
| 230-234 | R:000 G:000B:51W:51 |
| 235-239 | R:000 G:000 B:102 W:102 |
| 240-244 | R:000 G:000 B:153 W:153 |
| 245-249 | R:000 G:000 B:204 W:204 |
| 250-255 | R:000 G:000 B:255 W:255 |
MAINTENANCE
Dust build-up reduces light output performance and can cause overheating.
This can lead to reduction of the light source’s life and/or mechanical wear.
To maintain optimum performance and minimize wear, clean your lighting
products at least twice a month. However, be aware that usage and
environmental conditions could be contributing factors to increase the
cleaning frequency.
To clean the product, follow the instructions below:
- Unplug the product from power.
- Wait until the product is at room temperature.
- Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external surface/vents.
- Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, orisopropyl alcohol.
- Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
- Softly drag any dirt or grime to the outside of the transparent surface.
- Gently polish the transparent surfaces until they are free of haze and lint.
Always dry the transparent surfaces carefully after cleaning them.
CAUTION: Take care using this equipment high voltage-risk of electric
shock!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>