VALAVA 144LEDs RGB Stage Lights Bar User Manual
- June 16, 2024
- VALAVA
Table of Contents
USER MANUAL 144lEDs RGB STAGE LIGHT BAR
144LEDs RGB Stage Lights Bar
At first.thank you for purchasing the device.For the sake of safety and
regular operation of this projector.please read this manual carefully before
using and operating it in order to avoid any personal injury or damage to the
device.
[email protected]
WARNING
FOR YOUR OWN SAFETY,PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL
START-UP!
CAUTION: Keep this equipment away from rain, moisture and liquids.
SAFETY INSTRUCTIONS
Every person involved with the installation, operation & maintenance of this
equipment should:
ese competent
eFollow the instructions of this manual
CAUTION: Take care using this equipment!
high voltage-risk of electric shock!
Before your initial start-up, please make sure that there is no damage
causedduring transportation.Should there be any, consult your dealer and do
not usethe equipment.
To maintain the equipment in good working condition and to ensure
safeoperation, it is necessary for the user to follow the safety instructions
andwarning notes written in this manual.
Please note that damages caused by user modifications to this equipment arenot
subject to warranty.
Digital display operate
a).lllustration part:
Operation instructions:
After starting press A(MENU) Enter into main-menu, Press B(UP) C(DOWr) to
select the submenu, and then press D(ENTER) to ensure.
ATTENTION:
DANGER OF LIFEI RISK OF BURNSI RISK OF FIREI RISK OF SHORT CIRCUIT!
DMX Signal Connection
3-Pin XLR to 5-Pin XLR Conversion
Conductor| 3-Pin XLR Female (OUT)| 5-Pin XLR Male(IN)
Ground/Shield| Pin 1| Pin 1
Data Compliment (-signal)| Pin 2| Pin 2
Data True ( +signal)| Pin 3| Pin 3
Not Used| | Pin 4-Do Not Used
Not Used| | Pin 5-Do Not Used
Technical Specifications :
Voltage: AC 110-240V, 50/60 Hz
Consumption: 60W
LEDs: 144Pcs (1212Pcs) SMD 5050 31N1 RGB LEDs
Operation :Auto, DMX512,Sound, Master/Slave
Channel:3/5/8/36/40CHs, With LCD display,
Color: RGB color can be mixed to more than 16. 7 million kinds of color.
Beam Angle: 90°
Dimmer: 0-100% linear dimming
OMX ln/out.Power in & Power out.
Dimension: 1005.5*9cm
N.W: 1.75KG; G.W:2.15KG
SETTING MENU LED DISPLAY:
| Mode | Programming | Description |
|---|---|---|
| Auto mode | Auto | Sp 1-10 |
| St 0-9 | (slow->fast) | |
| DMX mode | Addr | 3 CH |
pluggedinto the console, automaticallyenter
DMX mode
5 CH| A001-A508
8 CH| A001-A505
36CH| A001-A477
40CH| A001-A473
Show| Shou| Sh 1-56| Program Show 1-56
Sp 1-10| Program Speed 1-10 (slow->fast)
St 0-9| Program Flash 0-9 (slow->fast)
Sound Mode| Soud| Soul —2| Sent-9| Sound active modes 1-2,sound sensitivity
1-9
Slave| SLAV| Slave| Slave (Slave, automatically identify the master)
Edit color| Colo| r000-255| Red (0-100%) Red Dimming
g000-255| Green (0-100%) Green Dimming
b000-255| Blue (0-100%) Blue Dimming
St0-9| LED Strobe (slow->fast)
Static colors| StAt| CL01-CL37| static color (37 static colors to choose from)
St0-9| LED Strobe (slow->fast)
Product Set| Set| dis| 10s| Set display board backlight time,10 seconds to
always on, factory default 10 seconds
20s
30s
60s
on
temP| 50-65 °C| Protection temperature setting,50-65°C range protection,more
than this range began to reduce the output power
dir| —>| Chasing direction: right
<—| Chasing direction: left
InFr| on| Remote control function setting on
oFF| Remote control function setting oFF
Send| yes| one button to set the send function to send the current light
channel mode and temperature protection value to other lights connected to
this light.(No other controller on the line)
Send
Information| Info| ver| VVxx| Software version
temp| XXC| The current light board temperature(degrees Celsius), if the
temperature detection line failure, power on prompt -RT-, menu display eror
DMX MODE1 :3 CH
| CH1 | 0-255 | ALL RED (0-100%) |
|---|---|---|
| CH2 | 0-255 | ALL GREEN(0-100%) |
| CH3 | 0-255 | ALL BLUE(0-100%) |
DMX MODE2:5 CH
| CH1 | 0-255 | MasterDimmer |
|---|---|---|
| CH2 | 0-9 | No Function |
| 10-255 | Slow->Fast | |
| CH3 | 0-255 | ALL RED (0-100%) |
| CH4 | 0-255 | ALL GREEN(0-100%) |
| CH5 | 0-255 | ALL BLUE (0-100%) |
DMX MODE3:8CH
| CH1 | 0-255 | MasterDimmer |
|---|---|---|
| CH2 | 0-255 | ALL RED (0-100%) |
| CH3 | 0-255 | ALL GREEN(0-100%) |
| CH4 | 0-255 | ALL BLUE(0-100%) |
| CH5 | 0-9 | No Function |
| 10-255 | Slow->Fast | |
| CH6 | 0-3 | CH2-4 Control the overall flower color |
| 4-7 | Pattern Effect 1(CH2-4 Control the pattern color) | |
| 8-11 | Pattern Effect 2(CH2-4 Control the pattern color) | |
| … | … | |
| 148-151 | Pattern Effect 37(CH2-4 Control the pattern color) | |
| 152-155 | Pattern Effect 38(Built-in effect colors) | |
| 156-159 | Pattern Effect 39(Built-in effect colors) | |
| … | … | |
| 224-227 | Pattern Effect 56(Built-in effect colors) | |
| 228-231 | Auto Effect (Cyclic running pattern effect 1-56) | |
| 232-235 | Sound 1 | |
| 236-255 | Sound 2 | |
| CH7 | 0-255 | RGB Program Speed(Slow->fast) |
| CH8 | 0-255 | CH6 in the pattern 1 — pattern 25, this channel is used as a |
pattern background color selection function
(see final background color table for details)
DMX MODE4:36CH
| CH1 | 0-255 | R1(0-100%) |
|---|---|---|
| CH2 | 0-255 | G1(0-100%) |
| CH3 | 0-255 | B1(0-100%) |
| ………. | ……….. | ……….. |
| CH34 | 0-255 | R12(0-100%) |
| CH35 | 0-255 | 012(0-100%) |
| CH36 | 0-255 | B12(0-100%) |
DMX MODE5:40CH
| CH1 | 0-255 | R1(0-100%) |
|---|---|---|
| CH2 | 0-255 | 01(0-100%) |
| CH3 | 0-255 | B1(0-100%) |
| …….. | ….. | ……….. |
| CH34 | 0-255 | R12(0-100%) |
| CH35 | 0-255 | G12(0-100%) |
| CH36 | 0-255 | B12(0-100%) |
| CH37 | 0-9 | No Function |
| 10-255 | Slow->Fast | |
| CH38 | 0-3 | CH1-37Control single segment |
| 4-7 | Pattern Effect 1(CH1-3 Control the pattern color) | |
| 8-11 | Pattern Effect 2(CH1-3 Control the pattern color) | |
| ……… | ……….. | |
| 148-151 | Pattern Effect 37(CH1-3 Control the pattern color) | |
| 152-155 | Pattern Effect 38(Built-in effect colors) | |
| 156-159 | Pattern Effect 39(Built-in effect colors) | |
| ……… | ……….. | |
| 224-227 | Pattern Effect 56(Built-in effect colors) | |
| 228-231 | Auto Effect(Cyclic running pattern effect 1-56) | |
| 232-235 | Sound 1 | |
| 236-255 | Sound 2 | |
| CH39 | 0-255 | RGB Program Speed(Slow->fast) |
| CH40 | 0-255 | Ch38 in pattern 1 — pattern 25, this channel is used as a pattern |
background color selection function (see final background color table for details)
RGB 3in1 Background Color Table:
| Value | Color |
|---|---|
| 0-6 | R:000G:000B:000 |
| 7-13 | R: 51 G:000B:000 |
| 14-20 | R:102G:000B:000 |
| 21-27 | R:153G:000B:000 |
| 28-34 | R:204G:000 B:000 |
| 35-43 | R:255G:000 B:000 |
| 42-48 | R:000G: 51 B:000 |
| 49-55 | R:000G:102 B:000 |
| 56-62 | R:000G:153B:000 |
| 63-69 | R 000G 204B:000 |
| 70-76 | R:000 G:255 B:000 |
| 77-83 | R:000G:000B: 51 |
| 84-90 | R:000G:000B:102 |
| 91-97 | R:000G:000B:153 |
| 98-104 | R:000G:000 B:204 |
| 105-111 | R•000G:000 B:255 |
| 112-118 | R: 51 G: 51 B:000 |
| 119-125 | R:102G:102 B:000 |
| 126-132 | R:153 G:153B 000 |
| --- | --- |
| 133-139 | R:204 G:204 B:000 |
| 140-146 | R:255 G:255B:000 |
| 147-153 | R: 51 G:000 B: 51 |
| 154-160 | R:102 G:000 B:102 |
| 161-167 | R:153 G:000 B:153 |
| 168-174 | R:204 G:000 B:204 |
| 175-181 | R:255 G:000B:255 |
| 182-188 | R:000G: 51 B: 51 |
| 189-195 | R:000 G:102 B:102 |
| 196-202 | R:000 G:153 B:153 |
| 203-209 | R:000 G:204 B:204 |
| 210-216 | R:000 G:255 B:255 |
| 217-223 | R:51 G:51 B:51 |
| 224-230 | R:102 G:102 B:102 |
| 231-237 | R:153 G:153 B:153 |
| 238-244 | R:204 G:204 B:204 |
| 245-255 | R 255G 255 B:255 |
MAINTENANCE
Dust build-up reduces light output performance and can cause overheating.This
can lead to reduction of the light source’s life andlor mechanical
wear.Tomaintain optimum performance and minimize wear, clean your lighting.
products at least twice a month.However, be aware that usage and environmental
conditions could be contributing factors to increase the cleaning frequency.
To clean the product, follow the instructions below:
- Unplug the product from power.
- Wait until the product is at room temperature.
- Use a vacuum (or dry compressed air) and a soft brush to remove dustcollected on the external surface/vents.
- Clean all transparent surfaces with a mild soap solution, ammonia-free glasscleaner, or isopropyl alcohol.
- Apply the solution directly to a soft, lint free cotton cloth or a lens cleaningtissue.
- Softly drag any dirt or grime to the outside of the transparent surface.
?.Gently polish the transparent surfaces until they are free of haze and lint.
Always dry the transparent surfaces carefully after cleaning them.
CAUTION: Take care using this equipment!
high voltage-risk of electric shock! !