ACERBIS 2936410001 Teket Magnet Swingarm Cover Installation Guide

: May 15, 2024
: ACERBiS

Table of Contents

ACERBIS 2936410001 Teket Magnet Swingarm Cover
Product Information
Product Usage Instructions
FAQ
ACERBIS PARTS
Installation Instruction
WARNING
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ACERBIS 2936410001 Teket Magnet Swingarm Cover

ACERBIS-2936410001-Teket-Magnet-Swingarm-Cover-product

Product Information

Specifications:

Brand: Acerbis
Model: Swingarm Protections Teket Magnet
Compatibility: KTM/Husqvarna/GasGas
Components Included: A, B, C, D, E, F, G, H

Product Usage Instructions

Installation Steps:

Insert plate (G) into support (C) and place zip ties (E) in their designated spaces.
Position the support (C) and loosely close the zip ties (E).
Mount swingarm protection (A) by connecting it to support (C) and tightening the zip ties (E).

Additional Installation Steps:

Insert plate (G) into support (D) and place zip ties (E) accordingly.
Position the support (D), insert the zip ties (E), and loosely close them.
Mount swingarm protection (B) by connecting it to support (D) and tightening the zip ties (E).

FAQ

Q: How do I ensure the velcros are correctly placed?
- A: When applying the swingarm protections, make sure to apply pressure on the fixing areas of the velcro and check that they are secured properly on both the protection and the swingarm.
Q: What should I do for better tightness after installation?
- A: To ensure a tighter fit, apply pressure on both velcros to secure the swingarm protections in place.
Q: Where can I find additional support or contact information?
- A: For further assistance or inquiries, please refer to the contact details provided in the user manual based on your region.

ACERBIS PARTS

$ACERBIS-2936410001-Teket-Magnet-Swingarm-Cover-fig $1$$

Installation Instruction

Insert the plate (G) in the support (C) and insert the zip ties (E) in their dedicated spaces, as shown in the figure.
Place the support (C) and close the zip ties (E) without tightening.
Mount the swingarm protection (A) framing it with the support (C) and tighten the zip ties (E).
Insert the plate (G) in the support (D) and insert the zip ties (E) in their dedicated spaces, as shown in the figure.
Place the support (D), insert the zip ties (E) as shown in the figure and close them without tightening.
Mount the swingarm protection (B) framing it with the support (D) and tighten the zip ties (E).
Remove the covers (A) and (B). Insert the rubber band (F) in the dedicated space, as shown in the figure on both protections.
Cut the adhesive velcro (H) in half.
Clean perfectly the swingarm and the teket magnet protection removing any trace of dirt, grease and oils in the indicated area. Remove the adhesive’s protective film (H) from one side and paste it on the inside of the protection (A)/(B), as shown in the figure (above the plastic details panel).
Once put in place, remove the other protective film.
Place the swingarm protections (A)/(B) apply pressure in the fixing areas of the velcro and remove it, checking that the velcros are placed correctly on the protection and the swingarm.
For better tightness, put pressure on bot velcros.
Mount the swingarm protection (A) framing it with the support (C) and hook the rubber band (F).
Mount the swingarm protection (B) framing it with the support (D) and hook the rubber band (F).

WARNING

Use Acerbis products at your own risk. Check the safety of your device before you ride. Be sure that you follow the instructions for installing the Acerbis products. Do not ride if there is missing or damaged hardware. If this is the case, take the item immediately back to your dealer. Make sure the throttle and other controls are free every time you ride. Not following these instructions and warnings could lead to interference with the controls, loss of control, and accidents. Acerbis recommends that installation must be done by a licensed mechanic and that only Acerbis’ original parts are used during installation. Acerbis makes no guarantees or representations, express or implied, regarding the fitment of its product for any particular purpose. Acerbis makes no guarantees or representations, express or implied, regarding the extent to which its products protect individuals or property from injury or death or damage.

EUROPE