ACERBIS X-Plock Link Saver Paralink Instruction Manual
- May 15, 2024
- ACERBiS
Table of Contents
ACERBIS X-Plock Link Saver Paralink
Product Information
Specifications
- COD. 500007785
- X-PLOCK LINK SAVER PARALINK X-PLOCK
- ACERBIS PARTS
- O.E.M. PARTS
- Components included: A, B, C, D, E, F, G, H
Product Usage Instructions
Preparation
Place the bike on the bike stand so that the rear wheel is lifted from the ground.
Disassembly
- Remove screw (G) and bolt (H) after unscrewing the damper’s nut (F).
- Place screw (D) inside component (B).
Assembly
- Place paralink components (A) and (B) inside the lower damper support.
- Tighten screw (C) and washer (E).
Final Steps
Reassemble the damper and rear rods. Tighten to the Manufacturer’s recommended torque settings as indicated in the owner’s manual.
Warning!
- ACERBIS ITALIA S.P.A. VIA SERIO, 37 – 24021 ALBINO (BG) – ITALY
FAQ
Q: Where can I find more information or contact support?
- You can contact ACERBIS through their respective regional offices listed in the manual or visit their website for more information.
ACERBIS PARTS
O.E.M. PARTS
INSTALLATION INSTRUCTION
- Place the bike on the bike stand so that the rear wheel is lifted from the ground.
- Remove the screw (G) and the bolt (H) after having unscrewed the damper’s nut (F).
- Place the screw (D) inside the component (B).
- Place the paralink components (A) and (B) inside the lower damper support.
- Tighten the screw (C) and the washer (E).
- Reassemble the damper and rear rods Tighten to the Manufacturer’s recommended torque settings as indicated in the owner’s manual.
WARNING!
- Use at your own risk. Check the security of your device before you ride. Be sure that you follow the instructions for installing the Acerbis products.
- Do not ride if there is missing or damaged hardware.
- If this is the case, take the item immediately back to your dealer. Make sure the throttle and other controls are free every time you ride.
- Lack of attention to instruction and warning could lead to interference with the controls, loss of control, and accidents.
- Acerbis recommends that installation must be done by a licensed mechanic and that only Acerbis is original parts are used during fitting.
- Acerbis makes no guarantees or representations, express or implied, regarding the fitness of its products for any particular purpose.
- Acerbis makes no guarantees or representations, express or implied, regarding the extent to which its product protects individuals or property from injury death, or damage.
- ACERBIS ITALIA S.P.A. VIA SERIO, 37 – 24021 ALBINO (BG) – ITALY
- Phone +39 035773577 – Fax +39 035773570 –INFOMOTO@ACERBIS.IT – WWW.ACERBIS.COM
- ACERBIS U.S.A. Inc. MAIL P.O. BOX 2030 SUN VALLEY, ID 83353 SHIP 110 LINDSAY CIRCLE KETCHUM, ID 83340
- Phone (800) 659-1440 – Fax (208) 726-7039 –INFOUSA@ACERBIS.COM
- ACERBIS U.K. Ltd UNIT 2 LUTON ENTERPRISE PARK SUNDON PARK ROAD LUTON, BEDFORDSHIRE LU3 3GU GREAT BRITAIN
- Phone +44 1582491076 – Fax +44 1582499639 –UKINFO@ACERBIS.IT
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>