ACERBIS GASGAS EC Fuel Tank 3.2 Gal Instruction Manual
- May 15, 2024
- ACERBiS
Table of Contents
ACERBIS GASGAS EC Fuel Tank 3.2 Gal Instruction Manual
ACERBIS PARTS
-
A – (1 pcs.)-
-
B – (4 pcs)
-
C – (4 pcs)
-
D – (1 pcs)
-
E – (1 pcs)
-
F – (1 pc s)
-
G – (1 pc s)
-
H – (4 pcs)
-
I – (1 pcs)
WARNING
Durante il rimontaggio suggeriamo vivamente di utilizzare un grasso anti- grippante su tutte le viti (C).
Higly suggest to use anti-seize/grease lubricant on all bolt threads (C) going into the tank’s metal inserts when reinstalling.
Assembly Instruction
-
Remove the radiator scoops. Disconnect the fuel pump cover cable and the fuel connector as indicated in the diagram.
Replace the original breather pipe with the one in equipment (I).
-
Remove the tank screw (G), then empty any remaining fuel from the tank. Remove the (D/E/F) fasteners and remove the fuel pump.
-
On the fuel tank Acerbis (A), reconnect the fuel pump (E) using the screws (H) with the original hardware.
-
Place the Acerbis fuel tank (A) on the bike.
Insert the tank and seat screws (G/B) as indicated in the diagram. Reconnect the fuel pump power cable and the fuel connector.
-
Assemble the radiator scoops with the screws (C). Connect the tube (I) to the cap tank.
ATTENTION: fuel line assembly detail. -
Attach the KTM fuel line (F) to the Acerbis tank (A) as indicated in the diagram. Make sure the fuel line isn’t folded over, obstructing the fuel flow.
LIBERATOR
FOR COMPETITION USE ONLY SOLO PER USO ANTAGONISTIC.
Thank you for purchasing an ACERBIS fuel tank.
WARNING
It is EXTREMELY IMPORTANT that the fuel tank be properly installed. To ensure proper installation, it is STRONGLY RECOMMENDED that the tank be installed only by a qualified OEM licensed dealership mechanic. Improper installation could result in serious injury or even death.
If self-installed NOTE THE FOLLOWING. Particular attention must be paid to excessive fuel line length and fuel line proximity to hot engine areas and pipes to prevent fire.
Clean tank interior thoroughly before installation. Install this fuel tank only in a well ventilated area, as gasoline fumes are extremely dangerous. Do not start or operate the vehicle if there are any fuel leaks! Read all instruction first before beginning installation.
DISCLAIMER
Due to uncontrolled variables in the manufacturing process of rotationally molded fuel tanks, the fuel tank may vary in size and shape by up to 7% of the manufacturer’s original listed capacity.
ACERBIS ITALIA S.P.A. VIA SERIO, 37 – 24021 ALBINO (BG) – ITALY Phone +39
035773577 – Fax +39 035773570 –
INFOMOTO@ACERBIS.IT –
WWW.ACERBIS.COM
ACERBIS U.S.A. Inc. MAIL P.O. BOX 2030 SUN VALLEY, ID 83353 SHIP 110
LINDSAY CIRCLE KETCHUM, ID 83340 Phone
800-659-1440 – Fax
208-726-7039 –
INFOUSA@ACERBIS.COM
ACERBIS U.K. Ltd UNIT 2 LUTON ENTERPRISE PARK SUNDON PARK ROAD LUTON,
BEDFORDSHIRE LU3 3GU GREAT BRITAIN Phone +44 1582491076 – Fax +44 1582499639 –
UKINFO@ACERBIS.IT
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>