PHLIPS DDLE801 Leading Edge Dimmer Controller Instruction Manual
- June 4, 2024
- PHLIPS
Table of Contents
DDLE801
Leading Edge
Dimmer Controller Installation Instructions
DDLE801 Leading Edge Dimmer Controller
Devices must be installed in an approved enclosure by a qualified electrician in accordance with all national and local electrical and construction codes and regulations.
| 
---|---
The manufacturer is not responsible for dimmable lamp selection. Each
lamp/dimmer combination must be tested for compatibility prior to
installation.
Installation of a home and building automation and control system shall comply
with IEC 60364 (all parts). The temperature limits and current-carrying
capacities for the communication wires specified in IEC 60364-5-52 shall not
be exceeded.
Professional dimmers rated > 1000 W are out of scope of EN 61000-3-2.
© 2022 Signify Holding. All rights reserved. Specifications are subject to
change without notice. No representation or warranty as to the accuracy or
completeness of the information included herein is given and any liability for
any action in reliance thereon is disclaimed. Philips and the Philips Shield
Emblem have registered trademarks of Koninklijke Philips N.V. All other
trademarks are owned by Signify Holding or their respective owners.
AZZ 386 0622 R19
www.dynalite.com