mobilitysmart B0B7JKX47T Multifunctional Electric Rollator User Guide

mobilitysmart B0B7JKX47T Multifunctional Electric Rollator

Introduction of Product

Multi-functional vehicle for the elderly is a multi-functional product that can solve the travel needs, nursing needs, rehabilitation and exercise needs of the elderly. The product has a variety of functions, which can be adapted to the physical conditions of different ages. A car can solve most of the problems of elderly travel, avoid the problem of single function of traditional products, can be a rollator, walker, wheelchair, electric wheelchair and other functions, is an effective helper for the elderly life.

Guidebook

Note: Please read the safety guide carefully before use, for safely and avoid potential risks caused by errors.

• Control of the product by children or those who do not understand its functions is prohibited.
• Users are prohibited from sitting on the product to be transported by any form of transport vehicle.
• Prohibit private modification of products, the consequences are not responsible.
• Prohibit beyond the guidance of use and applicable restrictions, the consequences are not responsible.
• Do not stand on the pedal, which may damage the pedal and affect safety.
• Do not use In heavy rain and windy weather.
• Do not use on ramps over 1o.
• If users fall more than 8cm, the impact will damage the structure.
• It is forbidden to lean out of the vehicle when carrying people to avoid safety risks
• Keep ventilation and heat dissipation while charging
• Do not exceed 1 00kg safe load range.

Vehicle Structure

1. Rear Control
2. Brake
3. Backrest
4. Height Adjustment Of Handgrip
5. Handgrlp Turning
6. Front Control
7. Charglng Port OS-Cushion
8. Foldable Foot Rest
9. Large-Capacity Shopping Bag
10. Motor
11. Front Wheel

Circuit Diagram

function

Physical Condition: Trouble Walking

| Trouble Walking| Unable To Walk Long Distance
Scene: Support Walking Exercise| Support Nursing| Driving

Front Control

• Gear 1 ~5 The higher the gear, the faster the speed, forward speed is 1.2~6KM/H, backward speed is 1 .0~ 2.2km /H.
• Others : the front control and rear control are mutually exclusive. When the front control is working, the rear control automatically stops, and vice versa.

REAR CONTROL

• Supporting mode : it is used for the support of people with mobility problems. Multi-Functional Rollator provides resistance to prevent the wheel from turning too fast and causing the user to fall.
• Gear : 01-03, the resistance gradually decreases, supporting force gradually weakened. Anti-fall: when pushing. If the speed of the rollator is too fast, the emergency autobrake, the liquid crystal display screen displays “LL”, re- lease the grip, the rear anti-fall is relieved, and “LL” disappears.
• Others : The touching panel is invalid in supporting mode
• Power assisted mode : it is used for carrying or carrying people. The Multi-functional vehicle provides automatic power assistance to push and ease
• Gear : C1-C3, power assistance gradually increases, moving speed gradually increases, maximum speed 4.8km /H.
• Automatic lock: 5 seconds after leaving the handgrip, the system will automatically lock, the liquid crystal display screen displays “LL.”, The Multi-Func- tional Rollator lock automatically, can not move; Hold the handgrip and the press button or any key, the lock is released, and “LL.” disappears.
• Automatic power assisted: hold the handgrip, unlock and push the Multi-Functional Rollator. At this time, the Multi-Functional Rollator will generate a certain force by speed of the user to push the motor, and automatically drive the Multi-Functional Rollator to move, making it easier to push.
• Power assisted switch : thumb touch the touching panel, the power generated by the motor will increase, the power assisted effect is more obvious, the speed of movement will be accelerated according to the different gear.
• Others : There is no anti-fall function in power assist mode.
• Cross obstacle mode: Select C1-C3 gear, hold the handgrip to stop the Multi-Functional Rollator, thumb touch the touching panel, the front part raised, it will stop to a certain Angle to ensure the safety of user

Rear Control Usage

Product specifications and component names. This product consists of frame, H-shaped Bar, front wheel, hub motor rear wheel, remote control, battery box, control box, auxiliary wheel Seat back cushion, pedal and other components .

Electrical parameter:

• Motor: DC24V 250W*2
• Charger: AC11 0-240V 50-60Hz The maximum output current : 2A
• Controller: The maximum output current 40A running current 2-3A performance parameter

1. Maximum speed: ≤ 6Km/H Brake performance: ≤ 1.5m
2. Static stability: < 9° Dynamic stability: < 6°
3. least radius of gyration: ≥ 1200mm

Vehicle opening steps and cable connection steps, and charging steps

1. Open the vehicle packing case, Take out vehicle and charger and other objects.

2. Place vehicle horizontallly, unlock clasp (as shown in the figure JPEG1-1: -2) JPEG1-1

3. Lift arm rest to replacement it. (as shown in the figure JPEG1-3; JPEG1-4) JPEG1-2

4. When the vehicle opened, press the cushion on both sides until the seat is flat, on hearing “click”. (as shown in the figure JPEG5-7), the Multi-Functional Rollator can be open easily (Caution: Pay attention to the middle of the seat as much as possible and beware of your hand)

5. When folding, turn over the pedal at first, when the pedal are collapsing, hold up the front pedal first, then turn right (turn left) fit to the body, hold up the strap, Hold the sides of the cushion and push them to the inside the clasp can be locked (as shown in the figure )

Installation and adjustment of each component

Cable and charging procedure

The charging port Is under the controller, please pay attention to the direction of the charger port insertion. Make sure it doesn’t get water Ingress. When the joint is connecting, it is necessary to pay attention to the matching of the notch, and the black arrows on the left and right joints should be corresponding, and the joint should not be forcibly inserted to prevent damage (as shown In the figure).

Error code lising

Please read the operation guide and precautions carefully, The wheelchair passes the strict product test, the product quality is excellent. If the LCD screen error code because of misoperation, Please refer to the following error code description, Repair according to error instructions if hardware problems, please contact customer service to explain the situation maintenance and disposal in time, When the symbol is flashing, Enter the error code interface, and the corresponding number in the interface represents the corresponding fault content. details as follows

__

E0002

| __

Left motor malfunction

| Check whether the left motor outlet Is damaged. If dam-

aged, replace the motor

Check whether the hall port of the left motor Is securely Inserted or whether the waterproof port of the motor Is

__

__

E0004

| __

__

Right motor malfunction

| Check whether the right motor outlet is damaged, if dam- aged, replace the motor Check whether the hall port of the right motor is securely Inserted or whether the water- proof port of the motor is securely inserted

Without the flrst two cases, replace the drive

__

E0008

| Left motor current detection error| Contact manufacturer to replace the driver
E0010| Right motor current detection error| Contact manufacturer to replace the driver
E0020| battery power detection is incorrect| Contact manufacturer to replace the driver
E0040| 15V voltage malfunction| Contact manufacturer to replace the driver
E0B00| Front control communication failure| Contact manufacturer to replace the driver and front control
E-021| Rear control communication failure| Contact manufacturer to replace the driver and rear control
EE| Tumble alarm| Return to normal after white alarm
E-023| Attitude sensor abnormal| Contact manufacturer to replace the intelligent rear control
E-024| Vehicle attitude calibration| Please read the Instruction book appendix 1 (Initialized ve- hicle attitude calibration)
E-025| The grip detection sensor abnormal| Contact manufacturer to replace the Intelligent rear control
E-026| The grip detection sensor Uncalibrated| Contact manufacturer to replace the intelligent rear control
E-027| The touch panel is abnormal| Contact manufacturer to replace the intelligent rear control

Preventive inspection
Check the following items before use, to keep the product in a safe state for use. Please Contact manufacturer if it needs to be repaired.

1. Note : Check the screws on the universal wheel, driving wheel, brake and other parts, and lock them tightly. Adjust tire pressure when braking is not effective. If there is still any problem after the tire pressure adjust- ment, please inform the after-sales service department.
2. In case of a flat tire, please seek help from the service department or the nearest bicycle shop. Do not use the wheel chair with a flat tire.
3. Do not place the product in the place where it is easy to be doused.
4. Wipe with a diluted cleaning solution stained.
5. The Multi-Functional Rollator should be maintained with a lubricant monthly.
6. cushion, back cushion, arm rest, should be washed with warm water and diluted soapy water regularly.

Stored in a well-ventilated room, the ambient temperature is -10°C – 45°C, the relative humidity is not more than 93%, No harmful gases, flammable, explosive substances and corrosive gases are allowed. Suitable for highway, railway, air and water transport. In the process of loading and unloading and transportation, it shall prevent violent vibration and impact, and shall not be affected by moisture, and shall not be with flammable and corrosive substances.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>