ELOVE HeatBltGrey Orthopaedic Electric Heating Pad User Manual

ELOVE HeatBltGrey Orthopaedic Electric Heating Pad

Product Information

Specifications

• Product Name: Elove Orthopaedic Electric Heating Pad
• Type: Orthopaedic Electric Heating Pad
• Power Source: Mains
• Heating Belt Material: Not specified

Product Usage Instructions

Step 1: Preparing the Heating Pad

1. Unpack the Elove Orthopaedic Electric Heating Pad.
2. Inspect the heating pad for any visible damage. Do not use if damaged.
3. Ensure the cord is properly attached to the heating pad.

Step 2: Positioning the Heating Pad

1. Select a comfortable and flat surface for using the heating pad.
2. Lay the heating pad on the chosen surface.
3. Make sure the heating pad is positioned correctly for the desired area of heat therapy.

Step 3: Connecting to Power

1. Locate a nearby power outlet.
2. Plug the power cord into the power outlet.
3. Ensure that the heating pad is not connected to power while you are preparing it for use.

Step 4: Adjusting Temperature and Timer

1. Refer to the user manual for specific instructions on adjusting the temperature and timer settings of your Elove Orthopaedic Electric Heating Pad.
2. Follow the provided guidelines to set your desired temperature and duration.

Step 5: Using the Heating Pad

1. Once the heating pad is connected to power and the desired settings are adjusted, lay down on the heating pad.
2. Position the heating belt on the targeted area for heat therapy.
3. Ensure that the heating belt is in direct contact with your body.

Step 6: After Use

1. When you have completed your heat therapy session, disconnect the cord from the mains power outlet.
2. Carefully remove the heating pad from under your body.
3. Ensure the heating pad is completely powered off and cool before storing it.

Frequently Asked Questions (FAQ)

Q: Can I sleep on the heating belt?

A: No, it is advised not to sleep on the heating belt after use. It is important to ensure your safety and prevent any potential hazards.

Q: What should I do if the wire gets damaged?

A: If you notice any damage to the wire, immediately stop using the heating pad and contact the manufacturer for further assistance. Do not attempt to repair it yourself.

Q: Is the heating pad waterproof?

A: No, please keep the heating pad away from moisture and water to avoid electrical hazards. Do not use it in wet environments or expose it to liquids.

Instructions (How to Use)

1. Plug the Power Cord into an electrical outlet (240 V AC)
2. Adjust the switch to the desired heat level:
   • Position 1 : 45 degree C – 50 degree C
   • Position 2 : 50 degree C – 60 degree C
   • Position 3 : 60 degree C – 85 degree C
3. Place the heating belt on the area to be treated
4. Turn the heating belt off and unplug the power cord after use.

Points to be remember

1. Remember to disconnect the cord from mains after use.
2. Avoid sharp folds in the wire and the heating belt
3. Make sure you don’t pull the wire while using.
4. Please keep away from the contact of moisture and water
5. Do not sleep on the heating belt after use.
6. Maximum heating temperature upto “60 degree C – 85 degree C”. Electric heating pad giving warm heat not a burning heat. If we raise heating temperature then it will be burn the skin. “

Don’t make the heating belt “V” Fold or “M” multi fold when it’s ON. Because the single side temperature will be around 85°+ another side 85° =170° which melts the belt and can also be burned.

Don’t make the heating belt “V” Fold or multi fold when it’s ON.

Because the single side temperature will be around 85°+ another side 85° =170° which melts the belt and can also be burned.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>