CONCEPTRONIC ORAZIO02 ERGO Wireless Ergonomic Keyboard and Mouse Kit Installation Guide
- June 17, 2024
- CONCEPTRONIC
Table of Contents
CONCEPTRONIC ORAZIO02 ERGO Wireless Ergonomic Keyboard and Mouse Kit
Simple Plug and Play installation
MOUSE BUTTONS
- Right button
- Scroll wheel/middle button
- Left button
- DPI button
- Forward button
- Backward button
- On/off switch
- Battery compartment
Congratulations on the purchase of your Conceptronic ORAZIO02.
When problems occur, we advise you to visit our support site (go to
www.conceptronic.net and click on ‘Support’).
If you have other questions about your
product and cannot find it on our website, please contact us via email:
support@conceptronic.net.
For more information about Conceptronic products, please visit the
Conceptronic website: www.conceptronic.net.
Installation & usage
- Open the battery compartment and insert the batteries. Close the compartments securely.
- Power on the keyboard and mouse.
- Connect the USB NANO receiver. No driver installation is required.
- The keyboard and mouse are ready to use.
Please note: If no keys are pressed on the keyboard and mouse for 10 minutes, they’ll enter sleep mode. Press any key to wake them up.
Multimedia keys
| | | | |
---|---|---|---|---|---
FN + F1
| FN + F2| FN + F3| FN + F4| FN + F5| FN + F6
Media Player| Volume
Down| Volume
Up| Mute| Previous
Track|
Next Track
| | | | | v
FN + F7
| FN + F8| FN + F9| FN + F10| FN + F11| FN + F12
Play/Pause| Stop| Browser| Email| My computer|
Favorite
Troubleshooting
If pairing is not successful.
Keyboard:
- Turn off the keyboard and then turn it on again.
- Short press the “CONNECT” key and plug the USB receiver into the computer.
- Maintain a distance of within 30cm between the keyboard and the USB receiver. The indicator light for pairing will flash for 3 seconds and then go out. The keyboard will work normally after that.
Mouse:
- Turn on the mouse.
- Simultaneously press and hold the middle button and the right button until the left indicator light flashes rapidly.
- Insert the receiver.
Specification
| Connection Type | 2.4G wireless |
|---|---|
| Frequency | 2408 – 2474MHz |
| EIRP | Keyboard: -15.29dBm, Mouse: -5.31dBm |
| Mouse type | Optical |
| DPI setting | 800/1200/1600 |
| Compatible operating systems | Windows XP / 7 / 8 / 10 / 11, Mac OS |
| Package content | AAA battery (x4) |
USB nano receiver
Wireless keyboard
Wireless mouse
Quick installation guide
Safety & Warnings instructions
Read the operating instructions carefully and especially observe the safety
information.
If you do not follow the safety instructions and information on proper
handling in this manual, we assume no liability for any resulting personal
injury or damage to property. Such cases will invalidate the
warranty/guarantee.
- Keep the device away from water, humidity, fire or hot environments.
- Keep your device and all its parts and accessories out of the reach of small children.
- Do not leave the packaging material lying around carelessly. This may become dangerous playing material for children.
- Avoid dropping, throwing or crushing the device.
- Do not open, change or damage the device.
- Do not mix new and old batteries or batteries of different types.
- If a battery leaks, keep the leaked fluid from touching your skin, eyes, clothes, or other surfaces.
- Observe signs and notices that prohibit or restrict the use of electronic devices.
- Turn off your device in any location where instructed to do so.
- Turn off your device before cleaning.
Disposal of waste electrical equipment and batteries: Do not dispose of waste electrical equipment and batteries with household waste. Please hand them to your local recycling point. Batteries should be fully discharged when disposed of. Incorrect storage/disposal can harm the environment and/or cause injury.
CE marking: Conceptronic declares that this product complies with the directives listed in the section ‘Declaration of Conformity’.
Customer Support
Digital Data Communications GmbH – Im Defdahl 10 F, 44141 Dortmund, Germany
CONCEPTRONIC® is a registered trademark of Digital Data Communications GmbH
© Copyright Digital Data Communications GmbH. All Rights Reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>