PAYZE SL-660200-BK Racing Simulator Cockpit User Guide
- June 3, 2024
- PAYZE
Table of Contents
PAYZE SL-660200-BK Racing Simulator Cockpit
IN THE BOX
INSTALLATION INSTRUCTIONS
Make sure you have all individual parts at hand before starting the assembly. Use the illustrations as a reference. All bolts and nuts come in numbered bags for easy identification.
- **** Slide the steering wheel stand (c) onto the main bar (j).
- Fix the steering wheel stand (c) into place by pulling its lever and adding the large hand screw (1).
- Attach the pedal plate holder (i) to the main bar (j).
- Screw the t-bracket (k) into place.
- Slide the pedal plate (f) onto the pedal plate holder (i).
- Fix the pedal plate (f) into place.
- Slide the steering wheel plate (d) into the steering wheel stand (c).
- Fix the steering wheel plate (d) into place using the two small hand screws (2).
- Attach the chair’s backrest (a) to its seat (b).
- Place the side covers (l/m) in both sides of the seat.
- Fix the sides covers (l/m) into place.
- Assemble the seat mount by screwing the mounting panels (g) to the mounting bars (h).
- Attach the seat connector (e) to the front mounting bar (h).
- Screw the mounting panels (g) to the bottom of the seat (b).
- Connect the mounted seat by sliding the seat connector (e) onto the main bar (j).
- Pull the lever of the seat connector (e) to fix the mounted seat into place.
Technical support: www.speedlink.com
Safety instructions: www.speedlink.com
INTENDED USE
This product is only intended for use as a racing chair and is for indoor use only. It contains no user-serviceable parts. Do not use the product if it shows signs of external damage or mechanical malfunction. Do not repair the product yourself unless instructed to do so in the manual. Speedlink GmbH accepts no liability whatsoever for any damage to this product or injuries caused due to careless or improper use or for purposes for which the product is not intended. Please keep this information for later reference.
WARNING SYMBOLS AND MARKINGS
This product contains moving parts. If used incorrectly, fingers or skin may be pinched accidentally which can cause bruising. Careless use may cause wear and tear on items that come into contact with the product when being set up/while using.
PLEASE NOTE
Chair safety:
- The racing chair is only designed for one person to sit/recline on. Do not stand/kneel on the racing chair, do not allow more than one person to sit on the racing chair at a time, do not sit on the edge of the racing chair.
- Inspect your racing chair regularly. If any components are damaged or missing, contact Speedlink Support. They’ll be pleased to assist.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>