FOCAL 100-T Serise Ceiling 2 Way Coaxial Loudspeaker User Manual

FOCAL 100-T Serise Ceiling 2 Way Coaxial Loudspeaker

Specifications

| 100 ICW5-T| 100 ICW6-T| 100 ICW8-T
---|---|---|---
Type| In-wall/In-celling 2-way coaxial for
100V/70V line installation| In-wall/In-celling 2-way coaxial for
100V/70V line installation| In-wall/In-celling 2-way coaxial for
100V/70V line installation
Drivers| 5″ (13cm) Polyglass Midbass
1″ (25mm) Aluminium inverted dome Tweeter| 61/2″ (16.5cm) Poly glass Mid bass
1″ (25mm) Aluminium inverted dome Tweeter| 8″ (21cm) Poly glass Mid bass
1″ (25mm) Aluminium inverted dome Tweeter
Sensitivity (2.83V/1m)| 88dB| 89dB| 90dB
Frequency response (+/-3dB)| 65Hz – 23kHz| 62Hz – 23kHz| 53Hz – 23kHz
Low frequency point (-6dB)| 56Hz| 50Hz| 40Hz
Power in 70V| 2/4/7.5W| 4/7.5/15W| 7.5/15/30W
Power in 100V| 4/8/15W| 8/15/30W| 15/30/60W
External dimensions (Ø/Depth)| 71/4×4″ (184x100mm)| 83/16×33/4″ (208x95mm)| 93/4×43/8″ (248x111mm)
Cut-Out diameter| 63/16″ (157mm)| 71/4″ (184mm)| 813/16″ (224mm)
Depth from wall| 33/4″ (96mm)| 35/8″ (91mm)| 41/4″ (107mm)
Net weight (with front grille)| 3.52lbs (1.6kg)| 3.75lbs (1.7kg)| 5lbs (2.3kg)
Packing dimensions (WxDxH)| 95/8×95/8×615/16″ (245x245x161mm)| 81/4×81/4×611/16″ (270x270x170mm)| 123/16×123/16×71/4″ (310x310x185mm)
Total weight (with packaging)| 5.29lbs (2.4kg)| 6.61lbs (3kg)| 8lbs (3.6kg)

IMPORTANT SAFETY INSTRUCTIONS

| Warning symbol. This symbol is designed to warn the user of the presence of important instructions mentioned in the user manual and relating to the handling, operation and maintenance of the device.
---|---

1. Read these instructions.
2. Keep these instructions.
3.  Heed all warnings.
4. Follow all the instructions.
5.  Do not use this device near water
6.  Only clean with a dry cloth.
7.   Do not obstruct ventilation openings. Follow the manufacturer’s instructions for installing the device.
8.  Do not install or store the device
9. Only use accessories recommended by the manufacturer.

| 10.  Only use suitable handling equipment, trolleys, stands, tripods, mounts or tables recommended by the manufacturer or sold with the de- vice. If using a trolley, take extra care when moving the trolley and device together, to prevent the device from falling off and causing injury.
11. All maintenance tasks should be performed by a qualified professional. Maintenance is required following any damage to the device, such as damage to the cabling or the plug, objects inserted into the device, liquids spilled inside the device, exposure to rain or moisture, or if the device is incorrectly operated or dropped| 12.  After any maintenance or repair work on the device, ask the maintenance technician to test it to check that it is working safely.
13.  70/100V products: Do not install or connect these products while the power is on. There is a risk of electric shock.
14.  To avoid damaging your hearing, do not listen to loudspeakers at high volumes for long periods of time. Listening to loudspeakers at high volumes can cause damage to the user’s ears and may lead to hearing problems (temporary or permanent deafness, buzzing in the ears, tinnitus, hyperacusis).
Exposure to excessive volumes (over 85dB) for more than one hour can cause irreparable damage to your hearing. If you experience buzzing or ringing (tinnitus) in the ears,
hearing loss or a “muffled” sensation, stop listening to the loudspeakers immediately.
(CEI 60417-6044)

• The methods of installing and mounting loudspeakers to any surface (bracket, ground anchoring, etc.) depend on the conditions and standards of installation, refurbishment, safety and cabling in force and applicable to the surfaces and/or brackets involved. In addition, the products may vibrate and damage the brackets onto which they are mounted. For this reason, the installation operations must be performed by a qualified professional who is familiar with installation and safety standards. Focal does not provide any end-of-use warranty for a given bracket or installation, as installing the loudspeakers is the customer’s sole responsibility. Focal is therefore not liable in any capacity whatsoever in the event of incident, accident and/or any other result or damage of any kind related to the installation of loudspeakers.

Thank you for purchasing a Focal product. Welcome to our High-Fidelity world. Innovation, tradition, excellence and pleasure are our values; our one and only aim is to bring you a sound that is rich, pure and true. To get the most out of your product, we recommend that you read the instructions in this booklet, then store it in a safe place to refer to in the future.

Package contents

•  1 x loudspeaker from the 100-T Series range
•  1 x circular/square grille
•  1 x safety sling
• 1 x cut-out template
•  1 x Quickstart
•  1 set of safety instructions and warranty terms and conditions

Key points

Aluminium inverted dome tweeter: the tweeter developed for the 100-T Series range of products uses Focal’s exclusive inverse dome technology, which enables optimum transfer of energy and limited directivity. The dome’s aluminium guarantees exceptional performance in terms of lightness and dampening, to provide a silky and dynamic treble.
Poly glass® cone speaker drivers: the cone in the speaker drivers from the 100-T Series range is made using Poly glass® technology. The glass beads added to the front panel of the cone stiffen its structure, thereby giving a rich mid-range coupled with a distortion-free bass.
Protective grille with magnetic attachment: easy to install, improved integration.
Can be used in a humid environment: resistant to moisture in the air, can be used in bathrooms, kitchens, etc. Ideal for on-board yacht systems. However, do not expose the product to splashes of water or any other liquid.
Assembly kit (optional): for mounting onto a partition during construction.
Transformer setting: Integration 100-T Series loudspeakers have a transformer setting for 70/100V use.
Fire rated rear enclosure (optional): ensures that the products comply with anti-fire standards. Increases the performance of the product by providing a rear sound volume.

Choosing an amplifier

In a 70V/100V Amplifier configuration:
It is recommended to use an amplifier that delivers 20% more power than the system’s total power to avoid a surge or damage to 100-T Series products.

• An amplifier used at full power, combined with a 70V/100V transformer, can deliver dangerous voltages. Ensure that you always disconnect the power from the amplifier and the transformer before handling, to avoid an electric shock. Installation is the customer’s sole responsibility. Focal is therefore not liable in any capacity whatsoever in the event of incident, accident and/or any other result or damage of any kind related to the installation of loudspeakers. Ensure that you follow the recommendations for your amplifier in order to correctly connect each Integration 100-T Series loudspeaker.

Loudspeaker positioning
The loudspeakers in the 100-T Series range have been developed to deliver the most faithful sound reproduction for any style of music. Nonetheless, a few simple rules should be followed to optimize their performance and to guarantee good tonal balance and a realistic sound image.

Use in multiple loudspeaker systems (ceiling)

For use in multiple loudspeaker systems (each loudspeaker working independently of the others), the loudspeakers can be installed according to your requirements and the room’s architectural constraints. However, take care not to install the loudspeakers too close to a wall or a corner, to avoid excessive low-frequency levels.

Cabling

Focal recommends using an amplifier that delivers 20% more power than the system’s total power, to avoid a surge or damage to the 100-T Series loudspeakers. Ensure that you follow the recommendations for your amplifier in order to correctly connect each Integration 100-T Series loudspeaker. The Integration 100-T Series loudspeakers must be connected to an amplifier for 100V/70V to connect multiple speaker drivers with long cable lengths. These connections must be parallel in order to chain the loudspeakers This method allows you to connect the loudspeakers together directly, for a more flexible system. We recommend using a cable with a + / – marker and ensuring the polarity of the speaker drivers is respected. Choose good quality cables with a cross-section appropriate for the installation length. You dealer will be able to advise you. If you connect the loudspeakers from the 100-T Series range with a 100-T Series amplifier, here is a non-exhaustive table of the recommended cable cross sections:

| Amplification power in Watts
---|---
Length (in feet and metres)| 60W| 120W| 200W| 300W| 400W| 500W
164ft (50m)| 0,75²| 0,75²| 0,75²| 0,75²| 0,75²| 0,75²
328 ft (100m)| 0,75²| 0,75²| 0,75²| 0,75²| 1,5²| 1,5²
656 ft (200m)| 0,75²| 0,75²| 1,5²| 1,5²| 2²| 2,5²
1312 ft (400m)| 0,75²| 1,5²| 2²| 4²| 4²|
1969 ft (600m)| 1,5²| 1,5²| 4²| 6²| |

INSTALLATION

Existing construction

•  Before installing the loudspeakers, ensure that the intended positions on the ceiling/wall are not obstructed by the routes of air vents or any cables that may interfere with the installation. Use the appropriate tools to help you determine suitable locations.
• Ensure that the ceiling/wall is thick/deep enough to allow the product to be installed.
• Use the cut-out template provided to trace the mounting outline onto the existing ceiling/wall. Cut along the traced line with a suitable tool to create an opening on the ceiling/wall
•  You can only install your speakers once you have wired them up. Make sure you leave enough cable length to connect your product with ease (approximately 193/4″/ 50cm) .

We recommend using a cable with a marker that ensures the polarity of the speaker drivers is respected. Choose good quality cables with a cross-section appropriate for their length: your dealer will be able to advise you.

• Add the safety sling provided to lock your product into the ceiling.

Each loudspeaker must be connected to the supporting structure and, if the system allows, via 2 separate points of the structure.

•  The loudspeaker is fitted into the wall and ceiling using rotating brackets. To do this, place the loudspeaker into the cut-out opening and turn the screw on the mounting brackets clockwise to tighten it using a Phillips head screwdriver or a screw-gun. If using a screwdriver, make sure that the tightening torque is set to a low value to avoid damaging the mounting brackets .

The loudspeaker is adequately attached when you feel resistance at the end of tightening.

New construction

•  Use the optional specific mounting kit.
•  Prepare the cables and make sure you leave enough cable length to be able to connect your product with ease (approximately 193/4″/ 50cm). We recommend using a cable with a marker to ensure the polarity of the speaker drivers is respected (+/-). Choose good quality cables with a cross-section appropriate for the length. You dealer will be able to advise you .
•  The loudspeaker is fitted into the wall using rotating brackets. To do this, place the loudspeaker into the cut-out opening and turn the screw on the mounting brackets clockwise to tighten it using a Phillips head screwdriver or a screw-gun. If using a screwdriver, make sure that the tightening torque is set to a low value to avoid damaging the mounting brackets .

The loudspeaker is adequately attached when you feel resistance at the end of tightening.
Positioning the tweeter (100 ICW6-T and 100 ICW8-T)
For the 100 ICW6-T and 100 ICW8-T models, the tweeter can be pointed towards the listening zone for a more precise treble and stereo image.ICW6-T, ICW8-T: 0 to 20° angle and 360° rotation.
Power setting (100 ICW5-T, 100 ICW6-T, 100 ICW8-T)
The power setting for the transformer of each product is found on the front panel .

SPECIAL PRECAUTIONS
Paint
You can paint the grille of your 100-T Series products (100 ICW5-T, 100 ICW6-T, 100 ICW8-T) so that they are coordinated with your environment. We recommend that you firstly remove the grille and paint it using a paint gun. The paint used can be the same type as the paint used on the walls . Ensure that you do not clog the grille with paint, to avoid altering the unit’s sound quality.
Running-in period
The speaker drivers used in the Integration 100-T Series loudspeakers are complex mechanical assemblies which need a break-in period to operate at their best and to become acclimatised to the temperature and humidity of your environment. This running-in period varies depending on the conditions in question and may take several weeks. To reduce this time, we recommend operating your loudspeakers for about twenty consecutive hours. Once the loudspeakers’ characteristics have totally stabilised, you will be able to enjoy your Integration 100-T Series loudspeakers’ performance to the full.

Warranty terms and conditions

Outside France, Focal equipment is covered by a warranty for which the terms and conditions are determined or implemented locally by the official Focal distributor for each country, in accordance with the laws in force in the region in question.

Correct elimination of this product.
This marking indicates that within the EU this product should not be disposed of with other household wastes. To prevent any risk to the environment or human health, please recycle them responsibly to encourage the reuse of material resources. To return your used device, please use the return and collection systems available, or contact the retailer where you purchased the product. They can recycle this product safely.
Figure

Documents / Resources

| FOCAL 100-T Serise Ceiling 2 Way Coaxial Loudspeaker [pdf] User Manual
100-T Series, 100-T, 100 ICW5-T, 100 ICW6-T, 100 ICW8-T, 100-T Serise Ceiling 2 Way Coaxial Loudspeaker, Ceiling 2 Way Coaxial Loudspeaker, 2 Way Coaxial Loudspeaker, Ceiling Coaxial Loudspeaker, Coaxial Loudspeaker, Ceiling Loudspeaker, Loudspeaker
---|---

References

• Top-of-the-range speakers and hi-fi equipment | Focal
• Extension de garantie | Focal
• Se connecter à focal-naim

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>