ACEFAST D5 Car Wireless Charging User Manual
- June 1, 2024
- ACEFAST
Table of Contents
ACEFAST D5 Car Wireless Charging
Car Wireless Charger Manual
-
Product Name: Car stand wireless charger
(Intelligent sensing) -
Power: 15W, 10W, 7.5W, 5W
-
Effective transmission distance:0-5mm
-
Size: 124mmx79mmx42mm
-
Charging interface: Type C
Packing list:
- Car bracket X 1, Manual X 1,
- Data line X 1, Car outlet base (clip) X 1
- Magnetic charging interface X 3
Functional Components
Specifications
- Model: D5
- Weight: product net weight about 115g
- Material: PC + ABS Vacuum Plating
- Input voltage/current: 5V/2A,9V/1.67A,12 V/2A
- Output power: 15W/10W/7 5W/5W automatic identification
- Charging power: 110K-205K Hz
- Wireless charging sensing distance: 0-5mm
- Support Specifications: Qualified with QI Wireless Protocol Charging
- Support QC wireless fast charge devices, such as iPhone8/8 Plus, iPhone X/XR/XS/XS Max, iPhone 11/11 Pro/11Pro Max, iPhone 12/Mini/12 Pro/12 Pro Max/iPhone13/13 Pro/13 Pro Max, iPhone 14/14 Plus/14 Pro/14 Pro Max, iPhone15/15Plus/15 Pro/15Pro Max Samsung 56, S6edge, 57, S7edge, 58, S8+, 59+ 12,
- Devices that do not support wireless charging can be used with magnetic suction heads
Instructions For Use
- Connect the vehicle’s wireless charging device to the appropriate data cable when using it.
- Connect the USB port of the data cable to the charging interface on the car (eg, cigarette lighter switching charger and USB charging port on the car).
- Charge output voltage 5V9V
- After the device is connected to the 5V ~ 9V DC power supply,the green indicator light is on. When the front of the object is close to the device 5cm ~ 15 cm, the arms are automatically opened. After putting it in the mobile phone, the device will automatically clamp the phone. At this time, the wireless charging will automatically charge the mobile phone. When the green light is on during charging, when the bump (power character) is touched by the hand, the equipment automatically opens the arms and removes the phone.
- This device has over-voltage protection, over-temperature protection, magnetic field protection, short-circuit protection,if the device is abnormal, it will automatically stop working.
Precautions
-
Do not over-squeeze or hit the device.
-
Do not use the wireless charger under severe high temperature, humidity or corrosive environment to avoid damaging the device’s circuit.
-
Wireless charger to avoid damage to the device’s circuit
When charging with a metal phone case, you need to put the metal The phone case can be removed to charge. -
Do not connect the phone to the car wireless charging device while charging the phone.Metal objects are placed and metal objects need to be removed.
Thank You For Using This Product!
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be co-
located for operating in conjunction with any other antenna or transmitter.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received,including interference that may cause undesired operation.
The device has a built-in battery, and without connecting the power and data cable, the bracket can open and close normally (wireless charging does not work)