ACEFAST D5 Car Mount Holder User Guide

: June 4, 2024
: ACEFAST

Table of Contents

ACEFAST D5 Car Mount Holder
Product Diagram
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ACEFAST D5 Car Mount Holder

ACEFAST-D5-Car-Mount-Holder-product-image

Product Diagram

Thank you for purchasing the D5 Multi-function car holder.
Please read this user manual carefully and keep it for future reference. If you need any assistance, please contact our support team with your product model number and Amazon order number.

Speciﬁcations

Model	D5
Size	Back clip size: 110 x 68.5 x 52.5 mm / 4.33 x 2.70 x 2.06 in

Dashboard base size: 167 x 72.5 x 40 mm / 6.57 x 2.85 x 1.57 in Air outlet clip size: 94 x 45 x 37 mm / 3.70 x 1.77 x 1.45 in
Weight| Total weight of the product is about 190g / 6.70oz
Material| ABS, silicone, hardware

Getting Started

A sticker base is included for use on leather or uneven surfaces. The mount itself can be adhered to the sticker base and more easily removed at a later time for use in another place or vehicle. If reusing the mount in this way, you can slightly dampen the adhesive surface of the mount to renew stickiness before reapplying.
1. Clean a preferably flat surface on your dashboard where you want to install the mount with a mixture of equal parts (1:1) isopropyl alcohol and water. Let the surface dry.
2. If you want to attach the mount directly to the surface, skip this step. Otherwise, carefully peel off the sticker base backing paper and adhere the base to the surface. Press down firmly and hold for a few minutes to ensure tight adhesion. For best results, allow 24 hours for the adhesive to securely bond with the surface. Then remove the plastic film from the top side.
3. Lift the mount locking lever up towards the mount arm. Carefully peel off the mount base adhesive backing paper and adhere the mount to the sticker base (or directly to the surface if not using the sticker base). Press down firmly, hold while pushing the mount locking lever back down again, and continue to hold down for a few minutes to ensure tight adhesion. For best results, allow 24 hours for the adhesive to securely bond with the surface before using the mount.
Air outlet clip: thanks to the design, it can be easily locked within 1 turn. Insert and rotate with one hand, easy to install and remove in one step.
- ```
  * Insert the blade into the clamp, insert it to the end, (turn clockwise) and lock it tightly.
```
- It can be easily taken out by turning it to the end (counterclockwise rotation).

ACEFAST-D5-Car-Mount-Holder-02

Product Care & Use

Don’t install the mount in front of the airbags.
The temperature, pressure, type & cleanness of the surface all affect the time the adhesive takes to bond.
The adhesive is designed for permanent adhesion. If you want to remove the sticker base from your car dashboard in the future, warm with a hair dryer and use a controlled prying & twisting action while holding the surface down. A sawing action with ordinary dental floss to cut through the adhesive layer can also work well. Alternatively, use dedicated adhesive removal products.
If the mount eventually comes unstuck from the sticker base, you can try slightly dampening the adhesive surface of the mount to renew stickiness before reapplying to the sticker base or directly to the surface.

Warranty & Customer Support
For questions, support, or warranty claims, contact us at the mail below that corresponds with your region. Please include your Amazon order number and product mode number.

Amazon US orders : support1@acefast.com
Amazon EU orders: support2@acefast.com
Amazon UK orders: support3@acefast.com
Amazon CA orders: support4@acefast.com
Amazon JP orders: support5@acefast.com
Other region orders: support6@acefast.com

*Please note, ACEFAST can provide after sales service for products purchased from any official ACEFAST store. If you have purchased from local seller, you can also contact them directly for service or warranty issues.

Shenzhen Houshuxia Technology Co., LTD
www.acefast.com | support@acefast.com
Rm203, 2nd Floor, Building C, Youth Pioneer Park, Jianshe East Road, Tsinghua Community,
Longhua Street, Longhua District, Shenzhen, P. R. China Shenzhen, 518000, China