Greengate OMC-DT-0701-R MicroSet Dual Tech Sensor Instruction Manual

: May 15, 2024
: Greengate

Table of Contents

Greengate OMC-DT-0701-R MicroSet Dual Tech Sensor
Product Specifications
FAQ
Product Overview
Typical Applications
Top Product Features
Product Features
Dimensional Details
Mounting Height
Order Information
Product Specifications
Overview
Technology
Wiring Diagrams
Mounting
DIP SWITCH SETTINGS
Coverage
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Greengate OMC-DT-0701-R MicroSet Dual Tech Sensor

Product Specifications

Mechanical Size: 1-5/12H x 3-3/4W x 6-1/12D (37mm x 100mm x 154mm)
Environment: Indoor
Hardware Specifications: LED Indicators
Warranty: Five-year warranty standard

Product Overview

The Greengate MicroSet Dual Tech Sensor is a ceiling sensor that combines Ultrasonic and Passive Infrared technologies for efficient motion detection and occupancy sensing.

Technology

The sensor features Microprocessor-based Airflow Tolerant Technology with patented rate of change technology, ensuring accurate detection and energy efficiency.

Mounting Instructions

Ensure the mounting height does not exceed 12 feet for optimal performance.
Follow the provided wiring diagrams for proper installation.
Set the DIP SWITCH SETTINGS according to your preferences.

Usage Instructions

After mounting, power on the sensor by connecting it to the electrical supply.
The sensor will automatically reset the time delay to a 10-minute default when left at the installer setting.
The Ultrasonic & Infrared sensing combination provides reliable detection in various applications.
Utilize the self-adjusting feature for optimal performance based on the environment.

FAQ

What is the maximum room size supported by the MicroSet Dual Tech Sensor?

The sensor is available in two variants: OMC-DT-0701-R supporting room sizes from 300 to 700 sq.ft., and OMC-DT-2000-R supporting room sizes from 700 to 2,000 sq.ft.

What are the factory default settings for the DIP SWITCH SETTINGS?

The factory default settings are: 1 – Auto ON / Manual ON, 2 – Lighting Sweep Off / ON, 3 – Self-Adjust / 30 Minute Lock, 4 – Normal / Energy Saver, 5 – Not Used, 6 – Normal / Low Sensitivity, 7 – Either Mode / Both Mode, 8 – Manual Override OFF / ON.

Project
Catalog #
Type
Prepared by
Notes Date

Product Overview

Ceiling sensor with combination of Ultrasonic and Passive Infrared technologies

Typical Applications

Conference Rooms
Office Spaces
Common Areas
Storage Areas
Hallways
Other Indoor Office Spaces

Interactive Menu

Order Information
Additional Resources
Wiring Diagrams
Connected Systems
Product Warranty

Top Product Features

Exclusive Energy Saver Mode
Complete no-gap coverage
Self adjustable delay of 10 minutes to 30 minutes
BAS compatible
Manual ON/OFF feature when wired to a normally open momentary pushbutton (Greengate Model# AML Switch)
Products tested to NEMA WD 7 – 2011
Occupancy Motion Sensors Standard
Options to meet Buy American Act requirements

Product Certification

Product Features

Dimensional Details

Mounting Height

Order Information

Catalog Number

| Catalog Number| Maximum Room Size| Field of View| Features
---|---|---|---|---
| OMC-DT-0701-R| 300 – 700 sq.ft.| One Way (180°)| w / BAS Relay
| OMC-DT-2000-R| 700 – 2,000 sq.ft.| Two Way (360°)| w / BAS Relay
Notes

(1) Only product configurations with this designated prefix are built to be compliant with the Buy American Act of 1933 (BAA). Please refer to DOMESTIC PREFERENCES website for more information. Components shipped separately may be separately analyzed under domestic preference requirements.

Product Specifications

Technology

Passive Infrared (PIR) and Ultrasonic (US)

Mechanical

Size: 1-5/12”H x 3-3/4”W x 6-1/12”D (37mm x 100mm x 154mm)
Environment:
- Operating temperature: 60°F to 90°F (15°C to 26°C)
- Relative humidity operating: Less than 95%, non-condensing
- For indoor use only
Housing: Medium impact injection molded housing. ABS resin complies with UL 94V0. Paintable off-white.

Electrical

Power Requirements:
Input
- 10-30 VDC from Greengate Switchpack or Greengate system
- Maximum current needed is 25mA per sensor
Output
- Open collector output to switch up to ten Greengate Switchpacks
- Isolated Form C Relay in (-R) models.
- Isolated Form C Relay Ratings: 1A 30 VDC/VAC
Hardware Specifications
LED Indicators:
- Red LED for PIR detection; Green LED for Ultrasonic detection
Controls and Performance
- Time delays:
- Self-adjustable from 10 min. to 30 min.
Available Frequencies:
- 32 kHz
Standards/Ratings
- cULus Listed
Warranty
- Five year warranty standard

Overview

The MicroSet Dual Tech sensor’s combination of Ultrasonic and Passive Infrared technologies offers the most complete sensing equipment available today. This pairing helps eliminate false activations or deactivations for additional energy savings. The OMC-DT sensors are also equipped with MicroSet technology which provides a revolutionary adaptive and airflow tolerant technology, making them ideal for spaces which have increased airflow due to higher occupant levels. MicroSet Dual Tech sensors drastically simplify and reduce a contractor’s installation and adjustment time period. These self-adapting, dual technology sensors truly offer some of the most advanced technology available.

Technology

The MicroSet technology continuously monitors multiple sub-frequencies in the event that if a continuous Doppler shift occurs, such as those created by airflow from an air duct, the sensor will identify the noise as continuous and then block it out of view at a select sub-frequency. It will continue to monitor other sub-frequencies for human motion. This avoids a false- activation, while still maintaining the high level of sensitivity that is necessary for sensing minor motion in a changing environment. Separate concurrent time delays for both Passive Infrared and Ultrasonic technologies avoid false activations or deactivations. The MicroSet Dual Tech sensor is also equipped with our exclusive Energy Saver Mode, specifically designed for classrooms with 2 level lighting, which can be selected by a DIP Switch, ensures that when an occupant enters the room only one zone of lamps will turn ON (typically those farthest away from the windows). In order to switch the other lamps ON you use a low voltage switch on the wall that is connected to the sensor. The switch (Greengate model# AML switch) allows the user to toggle between the various settings and allows an override to OFF.