Electrolux ESZ69300SX UltimateCare 700 Freestanding Dishwasher User Manual

Electrolux ESZ69300SX UltimateCare 700 Freestanding Dishwasher

Product Information

• Product Name: ESZ69300SX
• Product Type: Dishwasher
• Manufacturer: Electrolux
• Website: www.electrolux.com

Product Usage Instructions

1. Safety Information: Before installing and using the appliance, carefully read the supplied instructions. Keep the instructions in a safe and accessible location for future reference.
2. Safety Instructions:
3. Installation: Only a qualified person must install this appliance. Use safety gloves and enclosed footwear as the appliance is heavy.
4. Electrical Connection: To prevent fire and electric shock, follow the electrical connection guidelines provided. In India, use a voltage stabilizer to prevent product damage.
5. Water Connection: Follow the water connection instructions to avoid dangerous voltage.
6. Use: Follow the instructions provided for proper use of the appliance.
7. Service: Contact the Authorised Service Centre for any service or repair needs. Provide the model, PNC, and serial number of the appliance.
8. Disposal: Follow the recommended disposal guidelines to avoid the risk of injury or suffocation.
9. Product Description:
   • Worktop
   • Ceiling spray arm
   • Upper spray arm
   • Lower spray arm
   • Filters
   • Rating plate
   • Salt container
   • Air vent
   • Rinse aid dispenser
   • Detergent dispenser
   • Lower basket
   • Upper basket
   • Cutlery drawer
10. Control Panel:
    • On/off button
    • Program button
    • Programme indicators
    • Display
    • Delay button
    • Option button
    • Indicators
    • Start button
11. Indicators:
    • Salt indicator: Indicates when the salt container needs refilling. It is always off during the program operation.
    • Rinse aid indicator: Indicates when the rinse aid dispenser needs refilling. It is always off during the program operation.
    • Washing phase indicator: Indicates when the washing phase is operating.
    • Rinsing phase indicator: Indicates when the rinsing phase is operating.
    • Drying phase indicator: Indicates when a program with the drying phase is selected. It flashes during the drying phase operation.
    • Delay indicator: Indicates when the delay start is set.

WE’RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.

Welcome to Electrolux.

Visit our website to:
Get usage advice, brochures, trouble shooter, service and repair information:
www.electrolux.com/support

Register your product for better service:
www.registerelectrolux.com

CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.

Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.

SAFETY INFORMATION

Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

Children and vulnerable people safety

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
• Children between 3 and 8 years of age and persons with very extensive and complex disabilities shall be kept away from the appliance unless continuously supervised.
• Children of less than 3 years of age should be kept away from the appliance unless continuously supervised.
• Children should be supervised to ensure that they do not play with the appliance.
• Keep detergents away from children.
• Keep children and pets away from the appliance when the door is open.
• Children shall not carry out cleaning and user maintenance of the appliance without supervision.

General Safety

• This appliance is for cleaning household-type dishes and tableware only.
• This appliance is designed for single household domestic use in an indoor environment.
• This appliance may be used in, offices, hotel guest rooms, bed & breakfast guest rooms, farm guest houses and other similar accommodation where such use does not exceed (average) domestic usage levels.
• Do not change the specification of this appliance.
• The operating water pressure (minimum and maximum) must be between 0.5 (0.05) / 10 (1.0) bar (MPa)
• Follow the maximum number of 15 place settings.
• If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard.
• WARNING: Knives and other utensils with sharp points must be loaded in the basket with their points down or placed in a horizontal position.
• Do not leave the appliance with the open door unattended to avoid stepping accidentally onto it.
• Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket.
• Do not use high pressure water sprays and/or steam to clean the appliance.
• If the appliance has ventilation openings in the base, they must not be covered e.g. by a carpet.
• The appliance is to be connected to the water mains using the new supplied hose-sets. Old hose sets must not be reused.

SAFETY INSTRUCTIONS

Installation

WARNING!
Only a qualified person must install this appliance.

• Remove all the packaging.
• Do not install or use a damaged appliance.
• Follow the installation instructions supplied with the appliance.
• Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.
• Do not install or use the appliance where the temperature is less than 0 °C.
• Install the appliance in a safe and suitable place that meets installation requirements.

Electrical connection

WARNING!
Risk of fire and electric shock.

Valid for India only: In order to prevent damage of the product, please use the voltage stabilizer.

• Warning: this appliance is designed to be installed / connected to a grounding connection in the building.
• Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply.
• Always use a correctly installed shockproof socket.
• Do not use multi-plug adapters and extension cables.
• Make sure not to cause damage to the mains plug and to the mains cable. Should the mains cable need to be replaced, this must be carried out by our Authorised Service Centre.
• Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.
• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
• This appliance is fitted with a 13 A mains plug. If it is necessary to change the mains plug fuse, use only a 13 A ASTA (BS 1362) fuse (UK and Ireland only).

Water connection

• Do not cause damage to the water hoses.
• Before connection to new pipes, pipes not used for a long time, where repair work has been carried out or new devices fitted (water meters, etc.), let the water flow until it is clean and clear.
• Ensure that there are no visible water leaks during and after the first use of the appliance.
• Without electrical power, the water protection system is not active. In this case there is a risk of flooding.
• The water inlet hose has a safety valve and a sheath with an inner mains cable.

WARNING!
Dangerous voltage.

• If the water inlet hose is damaged, immediately close the water tap and disconnect the mains plug from the mains socket. Contact the Authorised Service Centre to replace the water inlet hose.

Use

• Do not put flammable products or items that are wet with flammable products in, near or on the appliance.
• Dishwasher detergents are dangerous. Follow the safety instructions on the detergent packaging.
• Do not drink and play with the water in the appliance.
• Do not remove the dishes from the appliance until the programme is complete. Some detergent may remain on the dishes.
• Do not store items or apply pressure on the open door of the appliance.
• The appliance can release hot steam if you open the door while a programme operates.

Service

• To repair the appliance contact the Authorised Service Centre. Use original spare parts only.
• Please note that self-repair or nonprofessional repair can have safety consequences and might void the guarantee.
• Concerning the lamp(s) inside this product and spare part lamps sold separately: These lamps are intended to withstand extreme physical conditions in household appliances, such as temperature, vibration,humidity, or are intended to signal
  information about the operational status of the appliance. They are not intended to be used in other applications and are not suitable for household room illumination.

Disposal

WARNING!
Risk of injury or suffocation.

• Disconnect the appliance from the mains supply.
• Cut off the mains cable and discard it.
• Remove the door catch to prevent children and pets to get closed in the appliance.

PRODUCT DESCRIPTION

1. Worktop
   2 Ceiling spray arm
   3 Upper spray arm
   4 Lower spray arm
   5 Filters
   6 Rating plate
   7 Salt container
   8 Air vent
   9 Rinse aid dispenser
   10 Detergent dispenser
   11 Lower basket
   12 Upper basket
   13 Cutlery drawer

CONTROL PANEL

1. On/off button
2. Program button
3. Programme indicators
4. Display
5. Delay button
6. Option button
7. Indicators
8. Start button

Indicators

PROGRAMMES

The order of the programmes in the table may not reflect their sequence on the control panel.

1. This programme offers the most efficient use of water and energy consumption for crockery and cutlery with normal soil. This is the standard programme for test institutes.

2. Automatic door opening during the drying phase. Refer to “Settings”.

3. The appliance senses the degree of soil and the quantity of items in the baskets. It automatically adjusts the temperature and the quantity of water, the energy consumption and the programme duration.

4. This programme is designed to clean the inside of the appliance effectively and efficiently.
   It removes limescale and grease buildup. The programme should be run at least once every 2 months with a descaler or a cleaning product designed for dishwashers and without any load.

5. With this programme, you can quickly rinse off food remains from dishes and prevent odours forming in the appliance. Do not use detergent with this programme.

Consumption values

1. The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of dishes and the degree of soil can change the values.
2. The values for programmes other than ECO are indicative only.

OPTIONS

• Desired options must be activated every time before you start a programme.
  It is not possible to activate or deactivate options while a programme is running.

• The option button toggles between the available options and their possible combinations.

• Not all options are compatible with each other.

• If you select non compatible options, the appliance automatically deactivates one or more of them. Only the indicators of the still active options are on.

• If an option is not applicable to a programme, the related indicator is off or it flashes quickly for a few seconds and then goes out.

• Activating options can affect the water and energy consumption as well as the programme duration.

GlassCare
This option protects a delicate load, glassware in particular, from damaging. It prevents rapid changes in the dishwashing temperature of the selected programme and reduces it to 45 °C.

How to activate GlassCare

Press until the indicator is on.
The display shows the updated programme duration.

ExtraPower
This option improves the dishwashing results of the selected programme. It increases the wash temperature and duration.

How to activate ExtraPower
Press until the indicator is on.
The display shows the updated programme duration.

SprayZone
This option improves the dishwashing results by increasing the pressure and temperature of the water as well as wash time. The option operates within the designated area in the lower basket.
SprayZone is suitable for dishwashing items with stubborn soil, e.g. pots, pans and casserole dishes.

CAUTION!
Make sure that the items placed in the SprayZone area do not block the upper spray arm.

How to activate SprayZone
Press until the indicator is on.
The display shows the updated programme duration.

SETTINGS

Programme selection mode and user mode
When the appliance is in programme selection mode it is possible to set a programme and to enter user mode.

Settings available in the user mode:

• The level of water softener according to the water hardness.
• The level of rinse aid according to the required dosage.
• Activation or deactivation of the AirDry.

As the appliance stores the saved settings, there is no need to configure it before every cycle.

How to set the programme selection mode
The appliance is in programme selection mode when the programme indicator ECO is on and the display shows the programme duration.

After activation, the appliance is in programme selection mode by default. If not, set the programme selection mode the following way:
Press and hold simultaneously and until the appliance is in programme selection mode.

How to enter user mode
Make sure the appliance is in programme selection mode.
To enter user mode, press and hold simultaneously and until the indicators ECO, 160min and 90min flash and the display is blank.

The water softener
The water softener removes minerals from the water supply, which would have a negative effect on the washing results and on the appliance. The higher the content of these minerals, the harder your water is. Water hardness is measured in equivalent scales. The water softener should be adjusted according to the hardness of the water in your area. Your local water authority can advise you on the hardness of the water in your area. Set the right level of the water softener to assure good washing results.

Softening hard water increases the consumption of water and energy as well as the programme duration. The higher the level of water softener, the higher the consumption and the longer the duration.

Water hardness

German de‐ grees (°dH)| French de‐ grees (°fH)| mmol/l| mg/l (ppm)| Clarke degrees| Water soften‐ er level
---|---|---|---|---|---
47 – 50| 84 – 90| 8.4 – 9.0| 835 – 904| 58 – 63| 10
43 – 46| 76 – 83| 7.6 – 8.3| 755 – 834| 53 – 57| 9
37 – 42| 65 – 75| 6.5 – 7.5| 645 – 754| 46 – 52| 8
29 – 36| 51 – 64| 5.1 – 6.4| 505 – 644| 36 – 45| 7
23 – 28| 40 – 50| 4.0 – 5.0| 395 – 504| 28 – 35| 6
19 – 22| 33 – 39| 3.3 – 3.9| 325 – 394| 23 – 27| 5 1)
15 – 18| 26 – 32| 2.6 – 3.2| 255 – 324| 18 – 22| 4
11 – 14| 19 – 25| 1.9 – 2.5| 185 – 254| 13 – 17| 3
4 – 10| 7 – 18| 0.7 – 1.8| 70 – 184| 5 – 12| 2
<4| <7| <0.7| <70| < 5| 1 2)

1. Factory setting.
2. Do not use salt at this level.

Regardless of the type of detergent used, set the proper water hardness level to keep the salt refill indicator active.

Multi-tabs containing salt are not effective enough to soften hard water.

How to set the water softener level
Make sure the appliance is in user mode.

1. Press .
   • The indicator ECO still flashes.
   • The remaining indicators are off.
   • The display shows the current setting: e.g. 4 A = level 5.
2. Press repeatedly to change the setting.
3. Press the on/off button to confirm the setting.

The rinse aid level
The rinse aid helps to dry the dishes without streaks and stains. It is automatically released during the hot rinse phase.
You can set the released quantity of rinse aid between level 1 (minimum quantity) and level 6 (maximum quantity).
Factory setting: level 4.

When the rinse aid chamber is empty,the rinse aid indicator is on, notifying to refill rinse aid. If the drying results are satisfactory while using multi- tablets only,you can deactivate the dispenser and the indicator. However, for the best drying performance, always use rinse aid and keep the rinse aid indicator active.

To deactivate the rinse aid dispenser and indicator, set the level of rinse aid to 0.

How to set the rinse aid level
Make sure the appliance is in user mode.

1. Press D
   • The indicator 160min still flashes.
   • The remaining indicators are off.
   • The display shows the current setting: e.g. 4R= level 4.
2. Press repeatedly to change the setting.
3. Press the on/off button to confirm the setting.

AirDry
AirDry improves the drying results with less energy consumption. The appliance door opens automatically during the drying phase and remains ajar.

AirDry is automatically activated with all programmes other than (if applicable).
The duration of the drying phase and the door opening time vary depending on the selected programme and options.
When AirDry opens the door, the display shows the remaining time of the running programme.

CAUTION!
Do not try to close the appliance door within 2 minutes after automatic opening. This can cause damage to the appliance.
If, ased voral, east 3 minutes,the running programme ends.

CAUTION!
If children have access to the appliance, we advise to deactivate AirDry. The automatic opening of the door may pose a danger.

How to deactivate AirDry
Make sure the appliance is in user mode.

1. Press
   • The indicator 90min still flashes.
   • The remaining indicators are off.
   • The display shows the current setting:
   • = AirDry is deactivated.
   • = AirDry is activated.
2. Press to change the setting.
3. Press the on/off button to confirm the setting.

BEFORE FIRST USE

1. Make sure that the current level of the water softener agrees with the hardness of the water supply. If not, adjust the level of the water softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any processing residuals that can still be inside the appliance. Do not use detergent and do not put dishes in the baskets.
   After starting the programme, the appliance recharges the resin in the water softener for up to 5 minutes. The washing phase starts only after this procedure is complete. The procedure is repeated periodically.

The salt container

CAUTION!
Use rough salt designed for dishwashers only. Fine salt increases the risk of corrosion.
The salt is used to recharge the resin in the water softener and to assure good washing results in daily use.

How to fill the salt container

1. Turn the cap of the salt container counterclockwise and remove it.
2. Put 1 litre of water in the salt container (only for the first time).
3. Fill the salt container with dishwasher salt (until it is full).
4. Carefully shake the funnel by its handle to get the last granules inside.
5. Remove the salt around the opening of the salt container.
6. Turn the cap of the salt container clockwise to close the salt container.

CAUTION!
Water and salt can come out of the salt container when you fill it. After you fill the salt container, immediately start the shortest programme to prevent corrosion. Do not put dishes in the baskets.

How to fill the rinse aid dispenser

CAUTION!
The compartment (B) is for rinse aid only. Do not fill it with detergent.

CAUTION!
Only use rinse aid designed specifically for dishwashers.

1. Open the lid (C).
2. Fill the dispenser (B) until the rinse aid reaches the marking ”MAX”.
3. Remove the spilled rinse aid with an absorbent cloth to prevent excessive foam formation.
4. Close the lid. Make sure that the lid locks into position.

Fill the rinse aid dispenser when the indicator (A) is clear.

DAILY USE

1. Open the water tap.

2. Press the on/off button to activate the appliance.
   Make sure that the appliance is in programme selection mode.

   • If the salt indicator is on, fill the salt container.
   • If the rinse aid indicator is on, fill the rinse aid dispenser.

3. Load the baskets.

4. Add the detergent.

5. Set and start a programme suitable for the type of load and the degree of soil.

Using the detergent

CAUTION!

Only use detergent specifically designed for dishwashers.

1. Press the release button (A) to open the lid (C).
2. Put the detergent (gel, powder or tablets) in the compartment (B).
3. If the programme has a prewash phase, put a small quantity of detergent on the inner part of the appliance door.
4. Close the lid. Make sure that the lid locks into position.

For information about the detergent dosage, refer to the manufacturer’s instructions on the packaging of the product.
Usually, 20 – 25 ml of gel detergent is adequate for washing a load with normal soil.
The upper ends of the two vertical ribs inside the compartment (B) indicate the maximum level for filling the dispenser with gel (max. 30ml).

Setting and starting a programme

Starting a programme

1. Press the on/off button to activate the appliance. Make sure that the appliance is in programme selection mode.

2. Close the appliance door.

3. Press P repeatedly until the indicator of the desired programme is on.
   The display shows the programme duration.

4. Set applicable options if desired.

5. Press to start the programme.

   • The indicator of the running phase is on.
   • The programme duration counts down in minutes.

Starting a programme with delay start

1. Set a programme.
2. Press repeatedly until the display shows the desired delay time (from 1 to 24 hours).
3. Press to begin the countdown.
   • The indicator is on.
   • The remaining time counts down in hours. The final hour is displayed in minutes.
     When the countdown is complete, the programme starts and the indicator of the running phase is on. The indicator is off.

Opening the door while the appliance operates

Opening the door while a programme is running stops the appliance. It may affect the energy consumption and the programme duration. After closing the door, the appliance continues from the point of interruption.

If the door is opened for more than 30 seconds during the drying phase, the running programme ends. It does not happen if the door is opened by AirDry function.

Cancelling the delay start while the countdown operates
When you cancel the delay start, you have to set a programme and options again.
Press and hold simultaneously and until the appliance is in programme selection mode.

Cancelling the programme
Press and hold simultaneously and until the appliance is in programme selection mode.
Make sure that there is detergent in the detergent dispenser before you start a new programme.

End of the programme
When the programme is complete, the Auto Off function switches the appliance off automatically.
All buttons are inactive except for the on/off button.

Close the water tap.

The Auto Off function
This function decreases energy consumption by deactivating automatically the appliance when it is not operating.

The function comes into operation:

• When the programme is complete.
• After 5 minutes if a programme was not started.

HINTS AND TIPS

General
Follow the hints below to ensure optimal cleaning and drying results in daily use and to protect the environment.

• Washing dishes in the dishwasher as instructed in the user manual usually consumes less water and energy than washing dishes by hand.
• Load the dishwasher to its full capacity to save water and energy.

For best cleaning results, arrange items in the baskets as instructed in the user manual and do not overload the baskets.

• Do not pre-rinse dishes by hand. It increases the water and energy consumption. When needed, select a programme with a prewash phase.
• Remove larger residues of food from the dishes and empty cups and glasses before putting them inside the appliance.
• Soak or slightly scour cookware with firmly cooked-on or baked-on food before washing it in the appliance.
• Make sure that items in the baskets do not touch or cover each other.

Only then can the water completely reach and wash the dishes.

• You can use dishwasher detergent, rinse aid and salt separately or you can use the multi-tablets (e.g. “All in 1”). Follow the instructions on the packaging.
• Select a programme according to the type of load and the degree of soil. ECO offers the most efficient use of water and energy consumption.
• To prevent limescale buildup inside the appliance:
  • Refill the salt container whenever necessary.
  • Use the recommended dosage of the detergent and rinse aid.
  • Make sure that the current level of the water softener agrees with the hardness of the water supply.
  • Follow the instructions in the chapter “Care and cleaning”.

Using salt, rinse aid and detergent

• Only use salt, rinse aid and detergent designed for dishwasher. Other products can cause damage to the appliance.

• In areas with hard and very hard water, we recommend to use basic dishwasher detergent (powder, gel, tablets containing no additional agents), rinse aid and salt separately for optimal cleaning and drying results.

• Detergent tablets do not fully dissolve with short programmes. To prevent detergent residues on the tableware, we recommend that you use tablets with long programmes.

• Always use the correct quantity of detergent. Insufficient dosage of detergent can result in poor cleaning results and hard-water filming or spotting on the items. Using too much detergent with soft or softened water results in detergent residues on the dishes. Adjust the amount of detergent based on the water hardness. Refer to the instructions on the detergent packaging.

• Always use the correct quantity of rinse aid. Insufficient dosage of rinse aid decreases the drying results.
  Using too much rinse aid results in bluish layers on the items.

• Make sure that the water softener level is correct. If the level is too high, the increased quantity of salt in the water might result in rust on cutlery.

What to do if you want to stop using multi-tablets
Before you start to use separately detergent, salt and rinse aid, complete the following steps:

1. Set the highest level of the water softener.
2. Make sure that the salt and rinse aid containers are full.
3. Start the shortest programme with a rinsing phase. Do not add detergent and do put dishes in the baskets.
4. When the programme is complete, adjust the water softener according to the water hardness in your area.
5. Adjust the released quantity of rinse aid.

Loading the baskets

• Always use the whole space of the baskets.

• Use the appliance to wash dishwasher-safe items only.

• Do not wash in the appliance items made of wood, horn, aluminium, pewter and copper as they could crack, warp, get discoloured or pitted.

• Do not wash in the appliance items that can absorb water (sponges, household cloths).

• Put hollow items (cups, glasses and pans) with the opening facing downwards.

• Make sure that glass items do not touch each other.

• Put light items in the upper basket.
  Make sure that the items do not move freely.

• Put cutlery and small items in the cutlery drawer.

• Move the upper basket upwards to accommodate large items in the lower basket.

• Make sure that the spray arms can move freely before you start a programme.

Before starting a programme
Before you start the selected programme, make sure that:

• The filters are clean and correctly installed.
• The cap of the salt container is tight.
• The spray arms are not clogged.
• There is enough salt and rinse aid (unless you use multi-tablets).
• The arrangement of the items in the baskets is correct.
• The programme is suitable to the type of load and the degree of soil.
• The correct quantity of detergent is used.

Unloading the baskets

• Let the tableware cool down before you remove it from the appliance. Hot items can be easily damaged.
• First remove items from the lower basket, then from the upper basket.
  After the programme is completed, water can still remain on the inside surfaces of the appliance.

CARE AND CLEANING

WARNING!
Before maintenance,deactivate the appliance and disconnect the mains plug from the main socket.
Dirty filters and clogged spray arms negatively affect the washing results. Check these elements regularly and, if necessary, clean them.

Internal cleaning

• Clean the appliance interior with a soft damp cloth.
• Do not use abrasive products, abrasive cleaning pads, sharp tools, strong chemicals, scourer or solvents.
• Wipe clean the door, including the rubber gasket, once a week.
• To maintain the performance of your appliance, use a cleaning product designed for dishwashers at least once every two months. Carefully follow the instructions on the packaging of the product.
• Use the automatic cleaning programme for optimal cleaning results.
• Using short-duration programmes regularly can cause grease and limescale buildup inside the appliance. Run long-duration programmes at least twice a month to prevent the buildup.

External cleaning

• Clean the appliance with a moist soft cloth.
• Only use neutral detergents.
• Do not use abrasive products, abrasive cleaning pads or solvents.

Cleaning the filters
The filter system is made of 3 parts.

1. Turn the filter (B) counterclockwise and remove it.

2. Remove the filter (C) out of filter (B).

3. Remove the flat filter (A).

4. Wash the filters.

5. Make sure that there are no residues of food or soil in or around the edge of the sump.

6. Put back in place the flat filter (A).
   Make sure that it is correctly positioned under the 2 guides.

7. Reassemble the filters (B) and (C).

8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks.

CAUTION!
An incorrect position of the filters can cause bad washing results and damage to the appliance.

Cleaning the filter of the inlet hose

1. Close the water tap.

2. Turn the fastener (A) clockwise.
   Disconnect the hose.

3. Clean the filter of the inlet hose.
   To reduce the frequency of cleaning, install an external water filter.

Cleaning the lower spray arm
We recommend to clean the lower spray arm regularly to prevent soil from clogging the holes.

Clogged holes can cause unsatisfactory washing results.

1. To remove the lower spray arm, pull it upwards.
2. Wash the spray arm under running water. Use a thin pointed tool, e.g. a toothpick, to remove particles of soil from the holes.
3. To install the spray arm back, press it downwards.

Cleaning the upper spray arm
We recommend to clean the upper spray arm regularly to prevent soil from clogging the holes.

Clogged holes can cause unsatisfactory washing results.

1. Pull out the upper basket.
2. To detach the spray arm from the basket, press the spray arm upwards and simultaneously turn it clockwise.
3. Wash the spray arm under running water. Use a thin pointed tool, e.g. a toothpick, to remove particles of soil from the holes.
4. To install the spray arm back, press the spray arm upwards and simultaneously turn it counterclockwise until it locks into place.

Cleaning the ceiling spray arm
We recommend to clean the ceiling spray arm regularly to prevent soil from clogging the holes. Clogged holes can cause unsatisfactory washing results.
The ceiling spray arm is placed on the ceiling of the appliance. The spray arm (C) is installed in the delivery tube (A) with the mounting element (B).

1. Release the stoppers on the sides of the sliding rails of the cutlery drawer and pull the drawer out.
2. Move the upper basket to the lowest level to reach the spray arm more easily.
3. To detach the spray arm (C) from the delivery tube (A), turn the mounting element (B) counterclockwise and pull the spray arm downwards.
4. Wash the spray arm under running water. Use a thin pointed tool, e.g. a toothpick, to remove particles of soil from the holes. Run the water through the holes to wash soil particles away from the inside.
5. To install the spray arm (C) back, insert the mounting element (B) in the spray arm and fix it in the delivery tube (A) by turning it clockwise. Make sure that the mounting element locks into place.
6. Install the cutlery drawer on the sliding rails and block the stoppers.

TROUBLESHOOTING

WARNING!
Improper repair of the appliance may pose a danger to the safety of the user. Any repairs must be performed by qualified personnel.

The majority of problems that may occur can be solved without the need to contact an Authorised Service Centre.
Refer to the below table for information on possible problems.
With some problems, the display shows an alarm code.

Refer to “Before first use”, “Daily use”, or “Hints and tips” for other possible causes.
Once you have checked the appliance, deactivate and activate the appliance. If the problem occurs again, contact an
Authorised Service Centre.
For alarm codes not described in the table, contact an Authorised Service Centre.

WARNING!
We do not recommend using the appliance until theproblem has been completely fixed. Unplug the appliance and do not plug it in again until you are certain that it operates correctly.

The dishwashing and drying results are not satisfactory

Refer to “Before first use”, “Daily use”, or “Hints and tips” for other possible causes.

TECHNICAL INFORMATION

1. Refer to the rating plate for other values.
2. If the hot water comes from alternative source of energy (e.g. solar panels), use the hot water supply to decrease energy consumption.

ENVIRONMENTAL CONCERNS

Recycle materials with the symbol .
Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.

www.electrolux.com/shop

References

• Electrolux
• Electrolux
• Home | Electrolux Product Registration

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>