Mandis DENON RC-270 Remote Control Replacement Instructions
- June 16, 2024
- Mandis
Table of Contents
Mandis DENON RC-270 Remote Control Replacement
Product Information
Specifications
- Product Name: Power Prog/Direct
- Model Number: N/A
- Power: AC Adapter
- Dimensions: N/A
- Weight: N/A
Product Usage Instructions
Power On/Off
To power the device, press the “Power” button located on the original remote
control. To power off the device, press and hold the “Power” button until the
device turns off.
Program/Direct Function
The “Prog/Direct” function allows you to directly input channel numbers. To
use this function, follow these steps:
- Press the “Prog/Direct” button on the original remote control.
- Using the numeric keypad, enter the desired channel number.
- Press the “Enter” or “OK” button to confirm the channel selection.
Volume Control
To adjust the volume, use the volume buttons located on the original remote
control. Press the “+” button to increase the volume and the “-” button to
decrease the volume.
Playback Controls
To control the playback of media, use the following buttons on the original
remote control:
- “Play” button: Start playing media.
- “Pause” button: Pause media playback.
- “Stop” button: Stop media playback.
Remote Control Replacement Function
Frequently Asked Questions
Q: How do I replace the remote control?
A: To replace the remote control, follow these steps:
- Obtain a replacement remote control compatible with the device.
- Remove the battery cover on the original remote control.
- Take out the old batteries and dispose of them properly.
- Insert the new batteries into the replacement remote control.
- Close the battery cover.
Q: How do I activate the sleep function?
A: To activate the sleep function, follow these steps:
- Press the “Power” button on the original remote control to turn on the device.
- Press the “Sleep” button located on the replacement remote control.
- Use the numeric keypad to enter the desired sleep timer duration.
- Press the “Enter” or “OK” button to confirm the sleep timer setting.
Q: How do I record using the device?
A: To initiate a recording, follow these steps:
- Ensure that the device is powered on and connected to a recording source.
- Press the “Rec” button on the original remote control to start recording.
- Use the playback controls to stop or pause the recording as needed.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>