CAMO WEDGECLIP Edge Clip Hidden Deck Fasteners Installation Guide
- May 15, 2024
- CAMO
Table of Contents
CAMO WEDGECLIP Edge Clip Hidden Deck Fasteners
INSTALLATION INSTRUCTIONS
WEDGE™ FOR ANY DECK PATTERN ON WOOD JOISTS
- **ANY BOARD***
- ANY ANGLE
- ANY ENVIRONMENT
ONE-PASS, ONE-HANDED INSTALLATION
Pre-assembled clips do not require partial installation — they stay in place in the groove until you’re ready to fasten.
316 STAINLESS STEEL MARINE GRADE
Offers the best corrosion resistance for coastal applications or projects in highly corrosive environments, like saltwater pool decks.
ANY BOARD, ANY ANGLE
Install grooved composite, PVC, and hardwood deck boards in 90-degree, diagonal, or herringbone patterns.
FASTEN BY HAND OR STANDING UP
Install 2X faster with the included** NEVER-MISS® GUIDE or up to 5X faster with the CAMO CLIPDRIVE™ or DRIVE.
WEDGE™ Clips are warranted by CAMO for use with Trex®, TimberTech® by AZEK®, Fiberon®, MoistureShield®, Deckorators®, and other leading brands. Read the full warranty at camofasteners.com
STAINLESS *CAMO WEDGE STEEL ™ Clips work in most leading grooved deck boards.
HOW TO
-
TILT THE WEDGE CLIP SO THE LOWER PRONGS ENTER THE GROOVE FIRST, THEN TILT THE CLIP BACK UP TO WEDGE INTO THE GROOVE.
-
PLACE A CLIP AT EVERY JOIST ALONG THE LENGTH OF THE BOARD.
-
SLIDE ON NEXT BOARD.
-
FASTEN WITH THE INCLUDED* NEVER-MISS® GUIDE OR OPTIONAL CLIPDRIVE™ OR DRIVE TOOLS.
START USING THE BETTER DECK CLIP
-
Clips create 3/16 in. (4.7mm) spacing between boards
- WEDGE™ WEDGES INTO BOARD’S GROOVE
- WEDGE™ WEDGES INTO BOARD’S GROOVE
-
Top-down access allows for easy board removal if needed
- **T-15 BITS
**
* **NEVER-MISS® GUIDE **
BUILD YOUR DECK UP TO 5X FASTER USING THE CAMO® SYSTEM
CUSTOMER SUPPORT
800-968-6245
[email protected]
WWW.CAMOFASTENES.COM
GRAND RAPIDS, MI 49519
WWW.NATIONALNAIL.COM
