CAMO Mk1182 Wedgemetal Clips User Guide
- June 17, 2024
- CAMO
Table of Contents
CAMO Mk1182 Wedgemetal Clips
Specifications
- Product Name: WEDGEMETALTM Clips
- Material: 410 Stainless Steel Drill Point Screw, 305 Stainless Steel Gusset
- Available Sizes: 90 ct. (50 sq. ft. 4.64m2), 450 ct. (250 sq. ft. 23.22m2)
- Usage: Deck clip for steel framing
Product Usage Instructions
-
1. **Installation:**
The WEDGEMETALTM Clips are designed for one-pass, one-handed installation. Follow these steps:
-
1. * Tilt the wedge clip so the lower prongs enter the groove first.- Tilt the clip back up to wedge it into the groove securely.
- Place a clip at every joist along the length of the board for optimal performance.
- Slide on the next board once the clip is in place.
- Optional Tools:
Tools included in the package:
-
1. * T-15 Bits- ClipDriveTM Lever Drive
- Fastening:
The WEDGEMETALTM Clips allow for fastening by hand or standing up, making it versatile for any user preference.
FAQ
- Q: Can I use WEDGEMETALTM Clips on wood framing?
- A: No, WEDGEMETALTM Clips are specifically designed for steel framing due to their unique design and fastening mechanism.
- Q: Are the included tools sufficient for installation?
- A: Yes, the package includes all the necessary tools for installing the clips efficiently and effectively.
- Q: How many clips do I need per square foot of decking?
- A: It is recommended to place a clip at every joist along the length of the board for secure and stable decking.
THE ULTIMATE DECK CLIP FOR STEEL FRAMING
Introduction
ONE-PASS, ONE-HANDED INSTALLATION
Pre-assembled clip doesn’t require partial installation—it stays in place in
the groove until you’re ready to fasten.
ANY BOARD, ANY ANGLE, ON METAL
Use WEDGEMETAL™ to fasten any grooved board at any angle on 14–18GA metal
framing, including Fortress® Evolution™ and New Castle Steel®.
FASTEN BY HAND OR STANDING UP
Install 2X faster with the included* NEVER-MISS® Guide or up to 5X faster with
the CAMO ClipDRIVE™ or DRIVE
WEDGEMETAL™ Clips are warranted by CAMO for use with Trex®, TimberTech® by AZEK®, Fiberon®, MoistureShield®, Deckorators®, and other leading brands. Read the full warranty at camofasteners.com.
HOW TO USE
- TILT THE WEDGE CLIP SO THE LOWER PRONGS ENTER THE GROOVE FIRST, THEN TILT THE CLIP BACK UP TO WEDGE INTO THE GROOVE.
- PLACE A CLIP AT EVERY JOIST ALONG THE LENGTH OF THE BOARD.
- SLIDE ON THE NEXT BOARD.
- FASTEN WITH THE INCLUDED* NEVER-MISS® GUIDE OR OPTIONAL CLIPDRIVE™ OR DRIVE TOOLS.
START USING THE BETTER DECK CLIP FOR METAL
- Clips create 3/16 in. (4.7mm) spacing between boards
- Top-down access allows for easy board removal if needed
BUILD YOUR DECK UP TO
- 5X FASTER USING THE CAMO® SYSTEM
CONTACT
- 800-968-6245
- [email protected]
- WWW.CAMOFASTENERS.COM
- GRAND RAPIDS, MI 49519
- WWW.NATIONALNAIL.COM