ASUS Q16647 Rog Gladius II Optical Gaming Mouse User Guide

May 15, 2024
Asus

ASUS Q16647 Rog Gladius II Optical Gaming Mouse

ASUS-Q16647-Rog-Gladius-II-Optical-Gaming-Mouse-
product

Specifications

  • Resolution: 100 DPI to 12000 DPI
  • DPI 1 standard: 1600 DPI
  • DPI 2 standard: 400 DPI

Product Usage Instructions

System Requirements

To set up your ROG Gladius II Gaming Mouse:

  1. Connect the USB cable to your computer’s USB port.
  2. Connect the micro USB cable to your ROG Gladius II Gaming Mouse.

Note: Make sure the ROG logo on the micro USB cable is facing upwards when connecting it to the mouse.

Personalization with ROG Armoury

For customization using ROG Armoury for performance tuning, lighting effects, and surface calibration, download and install ROG Armoury from www.asus.com.

Replacing the Switches

If you encounter issues during firmware update, disconnect the micro USB cable, press and hold the right, left, and scroll wheel buttons, then reconnect the micro USB cable to restart the update.

Frequently Asked Questions

How do I switch between profiles on the mouse?

To switch between profiles on the mouse, use the corresponding buttons for Profile 1, Profile 2, and Profile 3 as indicated in the manual.

What do I do if I encounter problems with DPI settings?

If you face issues with DPI settings, ensure that the mouse is properly connected to the computer and try adjusting the DPI levels using the designated buttons on the mouse.

Mouse Features

ASUS-Q16647-Rog-Gladius-II-Optical-Gaming-Mouse-fig
\(1\)

  1. DPI button
  2. Scroll wheel
  3. Right-click button
  4. Micro USB 2.0 connector
  5. Left-click button
  6. Target button
  7. Forward button
  8. Backward button
  9. Micro USB cable lock
  10. Mouse feet
  11. Rubber cover
  12. Optical sensor

Profile switching

  • 1+8:   Switch to Profile 1
  • 1+7: Switch to Profile 2
  • 1+6: Switch to Profile 3

Replacing the switches

ASUS-Q16647-Rog-Gladius-II-Optical-Gaming-Mouse-fig
\(2\)

Package contents

  • 1 x ROG Gladius II Gaming Mouse
  • 2 x Japanese-made Omron mouse switches
  • 1 x 2-meter USB cable
  • 1 x 1-meter USB cable
  • 1 x ROG logo sticker
  • 1 x ROG pouch
  • User documentation
  • Warranty card

System requirements

  • Windows® 10 / Windows® 7
  • 100 MB of hard disk space (for optional software installation)
  • Internet connection (for downloading optional software)
  • USB port

Specifications

Getting started

To set up your ROG Gladius Il Gaming Mouse:

  1. Connect the USB cable to your computer’s USB port.

  2. Connect the micro USB cable to your ROG Gladius II Gaming Mouse.
    NOTE: Ensure the ROG logo on the micro USB cable faces up when connecting it to the ROG Gladius Il Gaming mouse.

  3. Download the driver from http://www.asus.com then install it in your computer.

Customizing with ROG Armoury

For more programmable buttons, performance settings, lighting effects, and surface calibration, download and install the ROG Armoury from www.asus.com.
IMPORTANT! When you encounter a problem while updating the firmware, unplug the micro USB cable, then press and hold down the left, right and scroll button on your mouse and replug the micro USB cable to restart the update.

Notices

Federal Communications Commission Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

CAUTION! Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment

Compliance Statement of Innovation, Science and Economic Development Canada (ISED)

This device complies with the Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-3(B)/NMB-3(B)

Limitation of Liability

Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property and tangible personal property; or any other actual and direct damages resulted from omission or failure of performing legal duties under this Warranty Statement, up to the listed contract price of each product. ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringement under this Warranty Statement.

Proper disposal

  • DO NOT throw the device in municipal waste. This product has been designed to enable proper reuse of parts and recycling. The symbol of the crossed-out wheeled bin indicates that the product (electrical, electronic equipment and mercury-containing button cell battery) should not be placed in municipal waste. Check local regulations for disposal of electronic products.
  • DO NOT throw the device in fire. DO NOT short-circuit the contacts.
  • DO NOT disassemble the device.

ASUS Recycling/Takeback Services

ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions.

CE Mark Warning

ASUSTeK Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of related Directives. Full text of EU declaration of conformity is available at: www.asus.com/support

  • Manufacturer ASUSTek COMPUTER INC.
  • Address, City 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan
  • Authorized Representative in Europe ASUS COMPUTER GmbH
  • City Address Harkortstrasse 21-23, 40880 Ratingen
  • Country Germany

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals