LOCCI Stainless Steel Deep Well Hand Pump Installation Guide
- May 15, 2024
- LOCCI
Table of Contents
LOCCI Stainless Steel Deep Well Hand Pump
Product Information
Specifications:
- Well Pump Type: Newly arrived
- Handle Installation: Included
- Bottom Connection: Threaded
- Adapters: Two different adapters included
- Additional: Tape provided for water pipe installation
Product Usage Instructions
Handle Installation:
- Remove the screws at two locations as shown in the manual.
- Attach the handle to the well pump and torque the screws securely.
- Loosely twist the screw of the pump ring to adjust the handle position 360 degrees.
Bottom Connection Installation:
The bottom interface of the well pump is threaded. Follow these steps:
- Use one of the two provided adapters to connect a threaded pipe directly.
- For water pipe installation, use the tape provided with the product.
Installing Water Pipe:
- Directly connect a water pipe with threads to the bottom of the well pump.
- Alternatively, install the PVC adaptor of the first type and then connect the PVC water pipe.
- Or install the second PVC adaptor first and then connect the soft water pipe.
Frequently Asked Questions (FAQ)
-
Q: Can I use any type of water pipe with this well pump?
A: The well pump is designed to work with standard water pipes. Ensure proper fittings and adapters are used for a secure connection. -
Q: Do I need to use the provided tape for water pipe installation?
A: Yes, it is recommended to use the provided tape when installing water pipes to ensure a leak-free connection.
Installation instructions for the new well pump (newly arrived well pumps only need to see this page for installation instructions)
Handle Installation Method
- Remove the screws at two locations as shown.
- Attach the handle to the well pump as shown and torque the screws.
- As shown in the picture, twist the screw of the pump ring loosely to adjust the position of the handle 360 degrees.
Installation method for the bottom connection of the well pump
- The bottom interface of the well pump is threaded and can be installed directly with a threaded pipe. The product comes with two different adapters, so you can choose one to install and use as required.
- The product comes with tape for use when installing water pipes.
Three ways of installing water pipe
- Directly to the bottom of the well pump with a water pipe with threads.
- Install the PVC adaptor of the first type first and then connect the PVC water pipe.
- Install the second PVC adaptor first and then connect the soft water pipe.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>