Ziyituod Wireless WiFi Card Installation Guide
- June 7, 2024
- Ziyituod
Table of Contents
Ziyituod Wireless WiFi Card Installation Guide
Product Introduction
- Introduction:This Ziyituod WiFi card is a computer built-in wireless network card, For a desktop computer connect to wireless WLAN like a laptop does.
- Installation condition:It must have at least one PCI-E Slot on your (PCI-E X1, X4 , X8 , X16 all works)
- Attentions:Power off your computer before installing and read this guide carefully, forbid install in PCI slot.
- After sale service email: zyt4@evisionde.com
Hardware Installation
-
Open the side board.
-
Plug into PCI-E slot and fasten screw.
Connect Bluetooth Cable
Please ignore this step if models without bluetooth.
- Connect Bluetooth Cable.
Installation Completed
Driver installation
-
Run the CD card then in turn find the driver.
-
Choose the corresponding driver and run.
Get more information and driver from OR code.
Or www.ziyituod.net
-
Select and install as shown,after all turn on the computer.
-
Please check device manager, install successfully as shown. tHow to check device managensearch “devmgmt.msc” )
Connect WLAN
-
Select WLAN and connect.
-
Type in Password.
Connect Bluetooth device
-
Left click the bluetooth mark in the lower right corner of the computer screen, Select “Add device” in the menu page shown.
-
Choose the device you want to connect and “Next”.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>