ambrane PB10 Wireless Charging Power Bank User Manual
- June 3, 2024
- AMBRANE
Table of Contents
ambrane PB10 Wireless Charging Power Bank
Welcome
Thank you for purchasing the Ambrane Aerosync PB 10 power bank. we recommend you read the instruction manual carefully before using the product.
Package Contents
- l N AeroSync PB 10 power bank
- 1 N Charging Cable
- l N User Manual Scan Card
- 1 N Rating Card
Product Overview
Operating Instructions
How to Charge Devices with the Powerbank Wired Charging
- Connect your digital device to a USB-A or USB-C port of the power bank with a quality charge cable. This model doesn’t need to press the button to start the charging, just plug in and charging will start.
Note: We recommend you to use the original cable provider by mobile brands or Ambranefor a better charging experience.
- After connecting, LED indicators on the power bank will turn ON automatically. The first four Indicators will display the battery capacity ratio and the fifth green LED indicator will turn ON while Quick Charge or Power Delivery mode is activated.
Wireless Charging
-
Aerosync PB10 is compatible with Qi-enabled wireless charging devices.
-
Place your Qi-enabled device on the wireless charging pad. Make sure the device is aligned at the top of the charging base. Then press the power button to start the wireless charging.
-
The Green LED indicator will blink 2-3 times indicating it is sensing the wireless charging.
-
Once the charging starts, the Green indicator will glow continuously.
Note: For wireless charging, the distance between the charging Pad and the smartphone will be less than 4mm for a better and more stable charging experience.
How to Charge the Power Bank?
- A quality charge cable with a USB-C connector on one end and a USB-A or USB-C on the other end can be used. Plug the USB-C connector of the cable into the power bank’s input port (TypeC) and the other connector into the matching port of a USB power adapter. The LED indicator will start to flash and then stay solid one by one as the charging progresses.
- Few Important Tips to Charge the Powerbank
- Use Type-C to Type-C cable for PD charging and USB-A to Type-C cable for QC charging.
- We recommend using the QC/PD 20W power adapter to get an enhanced charging speed.
- Note: We recommend using a BIS-certified adapter to charge the power bank.
- While connecting QC or PD input, the fifth green LED indicator will glow which reflects the powerbank is in fast charging mode and the corresponding battery capacity indicator will blink.
- When fully charged, all four white LED indicators will turn ON and the blinking will stop.
- After the powerbank is fully charged, unplug the USB cable from the Powerbank.
- Note: We suggest not to exceed the time up to one hour after fully charged for better safety of the powerbanlc.
Product Specifications
- Battery Capacity: I0000mAh
- Battery Type: Lithium-Polymer
- Input Port: IN Type-C (QC/PD)
- Output Ports: IN Type-C (PD Compatible)
- IN USB-A (QC Compatible)
- Input: DC 5V~2.6A, 9V~2.IA, IOV~2A, 20W (max.)
- Output (QC/PD): DC 5V=3A, 9V=2.5A, 12V=1.87A
- Wattage: 22.5W (Max)
- Wireless Output: 15W (Max)
- Charging Time: Up to 3 Hrs through PD Technology
Indication of Charging and Discharging
Charging the Powerbank:
Connect with a suitable charging source. The indicators show charging
conditions as follows:
Power Level| LED-1| LED-2| LED-3| LED-4| LED-5
(Green, QC/ PD, Qi Mode)
---|---|---|---|---|---
0-25%| Blinking| OFF| OFF| OFF| ON
25-50%
|
ON
|
Blinking
|
OFF
|
OFF
|
ON
50-75%|
ON
|
ON
|
Blinking
|
OFF
|
ON
75-100%|
ON
|
ON
|
ON
| Blinking| ON
Fully Charged|
ON
|
ON
|
ON
|
ON
|
ON
Charging Error
|
Blinking
|
Blinking
|
Blinking
|
Blinking
|
Blinking
Charging Products from Powerbank:
Connect your device to the power bank to charge. The indicator shows
discharging conditions as follows:
Power Level| LED-1| LED-2| LED-3| LED-4| LED- 5
(Green, QC/
PD, Qi Mode)
---|---|---|---|---|---
Fully
Charged
| ON| ON|
ON
|
ON
| ON
75-100%
| ON| ON|
ON
|
ON
| ON
50-75%
| ON| ON|
ON
|
OFF
|
ON
25-50%
| ON| ON|
OFF
|
OFF
| ON
25-10 %
| ON|
OFF
|
OFF
|
OFF
|
ON
10-0%
| Blinking|
OFF
|
OFF
|
OFF
|
OFF
Charging Error| Blinking| Blinking| Blinking| Blinking| Blinking
Safety alerts and Guidelines
- Keep your Powerbank dry and away from moisture and corrosive materials.
- Do not clean your Powerbank with harsh chemicals, soaps or detergents. Just wipe it with a soft and dry cloth or use a microfiber cloth.
- To prevent fire or shock hazards, do not expose this unit to rain or moisture.
- Do not expose this unit to extremes of temperature.
- Immediately terminate use of the product if the item bulges, smells or leaks.
- Please recharge the Powerbank once a month if not in use to extend the lifetime of the battery.
- Please allow the Powerbank to deplete significantly before recharging in order to preserve the lifetime of the battery.
- Check the voltage of the USB devices and power adaptors carefully before using them.
- Please ensure that there are no metal or magnetic things (cases, rings, coins, keys, etc.) around before using the wireless charging feature.
- Do not place this unit directly onto furniture surfaces with any type of soft, porous, or sensitive finish. As with any rubber compound made with oils, the rubber finish could cause marks or staining where the product resides.
- Keep your device out of reach of small children to prevent danger.
- Lithium batteries, like all rechargeable batteries are recyclable and should not be recycled or disposed of in the normal household waste. Contact your local government for disposal or recycling practices in your area. They should be incinerated since they might explode.
- Keep away from fire, water and excess temperature ( > 45°C) and too lowtemperature( <-20°C)
- Do not dismantle, crush, puncture and short circuit the powerbank, or expose it to liquids, fire or an environment where the temperature is above 55°C.
Precautions
- Some USBcables that are not compatible with the powerbank or can’t be used should be avoided, instead, choose or purchase the charging cable of the same mobile brand to get adequate speed.
- When the powerbank won’t charge digital products, please check whether the charging cable and connectors are connected properly or change the cable. After digital devices are fully charged, please unplug the charging cable timely to avoid power loss.
- Because of the high charge and discharge current, please choose good quality charging cable and connectors.
- Please make sure the powerbank is fully charged when using it for the first time. Make sure that the product is fully charged at least once in two or three months.
- Prolonged use will increase the temperature of the powerbankwhich is a normal phenomenon.
- During charging of the powerbank, please unplug the cable within 30 mins when the powerbank is fully charged else overcharging will harm the battery.
- While using output through a single port, the powerbank delivers maximum power but if dual or more ports are used at the same time, then the powerbank will divide power into two or three. For Eg: Powerbank Maximum Current delivers 3.0A. In single port usage, the Powerbank will operate in only one parameter whether QC or PD and will provide the output ratio mentioned.
- If all the ports are used in a single phase then the powerbank will work on basic parameters and the current will be divided into all the ports.
warranty Card and Terms & Conditions
- NOTE: For valid warranty claim, all information on the warranty certificate has to be completed and presented along with the original invoice.
- All warranty information, product features and specifications are subject to change without prior notice.
- All matters are subject to Delhi Jurisdiction.
- Customer’s Name: ————-
- Contact Number:————–
- Customer’s Address: ————–
- Model No.: ____ _
- Purchase Date: __ _
- Invoice Number: __ _
- Dealer’s Stamp: __ _
- Ambrane Aerosync PB 10 powerbank comes with 180 days warranty from the date of purchase.
- warranty can not be claimed if the product is damaged by wrong operation or force majeure.
- Accessories supplied with Ambrane Aerosync PB 10 powerbank are not covered under the warranty.
- CUSTOMER CARE:
- Ambrane India Pvt. Ltd.
- 224, Second Floor, D-Mall, Netaji Subhash Place, Delhi; India -110034 Contact No.: +91 1145911111,
- E-mail:care@ambraneindia.com
- Web:www.ambraneindia.com
- Join the Ambrane Ally! @ambraneindia
Documents / Resources
|
ambrane PB10 Wireless Charging Power
Bank
[pdf] User Manual
PB10, Wireless Charging Power Bank, Charging Power Bank, Wireless Power Bank,
Power Bank, PB10 Power Bank
---|---