Shark LA700 Series Vacuum Cleaner Owner’s Manual
- June 17, 2024
- Shark
Table of Contents
LA700 Series Vacuum Cleaner
“`html
Product Information
The LA700 Series vacuum cleaner is a household appliance
designed to effectively clean various surfaces in your home. With
its motorized nozzle, wand, hose, and vacuum pod, this vacuum
offers powerful suction and versatile cleaning capabilities.
Specifications:
- Model: LA700 Series
- Intended Use: Household
- Power Source: Electric
- Features: Motorized brush roll, polarized plug, multiple
accessories
Product Usage Instructions
Safety Precautions:
- Inspect power cord and plug before each use.
- Avoid using the vacuum cleaner with damaged parts.
- Do not handle the plug or vacuum with wet hands.
- Always turn off the vacuum before connecting or disconnecting
accessories.
Operating Guidelines:
-
Read the user manual thoroughly before using the vacuum.
-
Secure the power cord around the cord hooks when storing.
-
Use only identical replacement parts to maintain
performance. -
Avoid using an extension cord with the vacuum cleaner.
-
Inspect all parts for damage before each use.
Cleaning Recommendations:
-
Avoid running the vacuum cleaner over the power cord or sharp
corners. -
Keep nozzle and accessory openings free of blockages.
-
Ensure proper airflow by checking for obstructions
regularly. -
Be cautious when cleaning stairs to prevent accidents.
-
Maintain continuous movement over carpet surfaces during
operation.
Frequently Asked Questions (FAQ)
Q: Can I use the vacuum cleaner for wet surfaces?
A: No, it is not recommended to use the vacuum cleaner on wet
surfaces to avoid electric shock or damage to the appliance.
Q: How often should I replace the filters?
A: Filters should be replaced according to the manufacturer’s
recommendations specified in the user manual to maintain optimal
performance.
Q: What should I do if the vacuum cleaner stops working
suddenly?
A: If the vacuum cleaner malfunctions unexpectedly, unplug it
immediately and check for any blockages or damages. Refer to the
troubleshooting section in the user manual for further
assistance.
“`
DuoClean® PowerFins® HairProTM Lift-Away® ADV with Self-Cleaning Brushroll and
Odor Neutralizer Technology Upright Vacuum
LA700 Series
OWNER’S GUIDE
IMPORTANT SAFETY INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
WARNING
To reduce the risk of fire, electric shock, injury, or property damage, when
using an electrical appliance, basic precautions should always be followed,
including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM
1. Inspect power cord and plug for any damage before use. DO NOT use vacuum
cleaner with a damaged cord or plug. Turn off all controls before plugging in
or unplugging the vacuum cleaner. Store your vacuum cleaner with the power
cord secured around the two cord hooks. To minimize the risk of power cord
damage, do not allow the motorized brush roll to ingest the cord. If this
occurs, immediately shut off power to the vacuum and remove the cord.
2. This appliance has a polarized plug. If the plug does not fit fully into
the outlet, reverse the plug (one blade is wider than the other). If it still
does not fit, contact a qualified electrician. DO NOT force into outlet or try
to modify to fit.
3. Your vacuum cleaner may consist of a motorized nozzle, wand, hose, and/ or
vacuum pod. This device contains electrical connections, electrical wiring,
and moving parts that potentially present risk to the user. The hose contains
electrical wires. Do not use when damaged, cut, or punctured.
4. Use only identical replacement parts.
5. Carefully observe and follow the instructions provided below to avoid
improper use of the appliance. DO NOT use the vacuum for any purpose other
than those described in this manual.
6. Before use, carefully inspect all parts for any damage. DO NOT use if any
parts are damaged.
7. The use of an extension cord is NOT recommended.
8. This vacuum cleaner contains no serviceable parts.
9. This appliance can be used by persons with reduced physical, sensory, or
mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way
and understand the hazards involved. Cleaning and user maintenance shall not
be made by children. Keep the appliance and its cord out of reach of children.
DO NOT allow the appliance to be used by children. DO NOT allow to be used as
a toy. Close supervision is necessary when used near children.
10. Always turn off the vacuum cleaner before connecting or disconnecting any
motorized nozzles, hose, or other accessories.
11. DO NOT handle plug or vacuum cleaner with wet hands.
12. DO NOT use without filters in place.
13. Only use Shark® branded filters and accessories.
14. DO NOT damage the power cord:
a) DO NOT pull or carry vacuum cleaner by the cord or use the cord as a
handle.
b) DO NOT unplug by pulling on cord. Grasp the plug, not the cord.
c) DO NOT run the vacuum cleaner over the power cord, close a door on the
cord, pull the cord around sharp corners, or leave the cord near heated
surfaces.
15. DO NOT put any objects into nozzle or accessory openings. DO NOT use with
any opening blocked; keep free of dust, lint, hair, and anything that may
reduce airflow.
16. DO NOT use if nozzle or accessory airflow is restricted. If the air paths
or the motorized floor nozzle become blocked, turn the vacuum cleaner off and
unplug from electrical outlet. Remove all obstructions before you plug in and
turn on the unit again.
sharkclean.com
17. Keep nozzle and all vacuum openings away from hair, face, fingers,
uncovered feet, or loose clothing.
18. DO NOT use if vacuum cleaner is not working as it should, or has been
dropped, damaged, left outdoors, or dropped into water.
19. Use extra care when cleaning on stairs.
20. DO NOT leave the vacuum cleaner unattended while plugged in.
21. When powered on, keep the vacuum cleaner moving over the carpet surface
at all times to avoid damaging the carpet fibers.
22. DO NOT place vacuum cleaner on unstable surfaces such as chairs or
tables.
23. Your Shark® vacuum may not be designed to stand up on its own. When
taking a break from cleaning, you may need to lean it against furniture or a
wall, or lay it flat on the floor. Using the vacuum for an application where
the unit lacks stability may result in personal injury.
24. DO NOT use to pick up:
a) Liquids
b) Large objects
c) Hard or sharp objects (glass, nails, screws, or coins)
d) Large quantities of dust (drywall dust, fireplace ash, or embers). DO NOT
use as an attachment to power tools for dust collection.
e) Smoking or burning objects (hot coals, cigarette butts, or matches)
f) Flammable or combustible materials (lighter fluid, gasoline, or kerosene)
g) Toxic materials (chlorine bleach, ammonia, or drain cleaner)
25. DO NOT use in the following areas:
a) Poorly lit areas
b) Wet or damp surfaces
c) Outdoor areas
d) Spaces that are enclosed and may contain explosive or toxic fumes or vapors
(lighter fluid, gasoline, kerosene, paint, paint thinners, mothproofing
substances, or flammable dust).
26. Turn off all controls before plugging in or unplugging the vacuum.
ODOR 27. Observe the following when
interacting with the Odor Neutralizer Technology cartridge
a) DO NOT attempt to disassemble odor neutralizer technology cartridge.
b) Avoid direct contact with the fragrance pod in the cartridge.
c) DO NOT directly inhale from the Odor Neutralizer Technology cartridge
d) Keep away from children and pets.
e) Keep away from heat, sparks, and open flame.
f) DO NOT place in direct sunlight.
FRAGRANCE CARTRIDGE FIRST AID
a) Avoid contact with fabrics and finished surfaces.
b) Eye contact: Remove contact lenses if present. Rinse continuously with
water for several minutes.
c) Skin contact: Wash hands thoroughly after handling. If irritation or rash
develops, seek medical advice/attention.
d) Inhalation: Move person to fresh air if they are experiencing any
respiratory symptoms. If symptoms persist, seek medical advice/ attention.
e) Ingestion: DO NOT induce vomiting. Seek medical advice/ attention.
28. Unplug from electrical outlet when not in use and before any maintenance
or cleaning.
29. Hand wash with water only. Washing with cleaning chemicals could damage
the unit.
30. During cleaning or routine maintenance, DO NOT cut anything other than
hair, fibers, or string wrapped around the brushroll.
31. Allow all filters to air-dry completely before replacing in the vacuum to
prevent liquid from being drawn into electric parts.
32. Make sure the dust cup and all filters are in place after routine
maintenance.
33. If provided, secure the power cord around the two cord hooks during
storage.
SAVE THESE INSTRUCTIONS
sharkclean.com
ASSEMBLY
ASSEMBLY
2 (Click)
3 (Click)
1 (Click)
4 (Click)
1. Place Pod down onto Nozzle. 2. Insert Wand into Pod. 3. Insert Handle into
wand. 4. Attach Hose to back of pod. 5. Remove Odor Neutralizer Technology
Dial from bag. Flip up the dial handle,
align the teal arrows, then insert the dial into the nozzle. 6. To lock and
engage the dial, rotate it counterclockwise until it clicks into the desired
odor intensity setting.
- More detailed Odor Neutralizer Technology assembly instructions and visuals on the following two pages.
IMPORTANT: For proper operation, ensure all connections are securely clicked into place.
sharkclean.com
Upper Cord Hook
Tool Storage Posts
Lower Cord Hook
5
6 (Turn to
Click)
POWER CORD
UPPER CORD HOOK
For cord access, rotate upper hook down and remove cord.
CORD HOLDER Use cord holder on the side of wand to hold cord in place while
vacuuming.
sharkclean.com
TECHNOLOGY SETTINGS SETTINGS
ODOR NEUTRALIZER TECHNOLOGY ODOR CARTRIDGE REPLACEMENT
ODOR DIAL Flip up the dial handle and rotate the odor dial to adjust Odor
Neutralizer Technology intensity or to unlock the dial for cartridge access.
Insertion/Removal: Rotate the odor dial to align the teal arrows. Remove the
dial to access the odor cartridge for removal or replacement.
Low: Rotate the dial toward the Low position to decrease the intensity to the
lowest level when the vacuum is in use.
High: Rotate the dial toward the High position for the highest intensity level
when the vacuum is in use. This position is the recommended setting for
optimal performance.
ODOR NEUTRALIZER TECHNOLOGY TIPS
Odor Dial Must be Installed for Vacuum to Function Properly · Remove odor
cartridge from dial if you don’t want the benefits of the Odor Neutralization
Technology.
Maintenance Required · Clean all filters as recommended under Cleaning
Filters. · Empty the dust cup before storing your vacuum. · Replace the
cartridge as recommended under Odor Cartridge Replacement. · Visit
qr.sharkclean.com/odortech to learn more and purchase replacements. · If wet
pet messes are cleaned up, thoroughly clean the vacuum.
Fragrance Strength Over Time · The intensity of the Odor Neutralizer
Technology’s fragrance may diminish over time. It may
also have no noticeable fragrance at all. This is natural and does not
indicate the technology isn’t working. Follow replacement instructions to
ensure continued performance.
NOTES: · The odor dial needs to be installed for the vacuum to function
properly, with or without the odor cartridge. · Odor Neutralizer Technology
effectively deodorizes while interacting with odors from inanimate sources.
sharkclean.com
1. REMOVE ODOR DIAL FROM NOZZLE
Flip up the handle and rotate the dial clockwise until the two teal arrows are
aligned. Pull the handle to remove the dial from the nozzle.
2. REMOVE OLD ODOR CARTRIDGE
Rotate the cartridge counterclockwise in the dial housing and pull out the
cartridge to remove it.
TURN UNTIL CLICK TO LOCK
3.REMOVE NEW CARTRIDGE FROM BAG
Remove the new odor cartridge from the sealed packaging. To maintain the life
of the cartridge, keep it in the sealed packaging until you are ready to
install it.
4. INSTALL NEW CARTRIDGE IN DIAL
Align the yellow arrow on the side of the cartridge with the yellow arrow on
the side of the dial cover, then insert the cartridge into the dial. Rotate
the cartridge clockwise to lock it in place.
5. INSTALL DIAL IN NOZZLE
Align the teal arrow on the dial cover with the teal arrow on the nozzle, then
reinsert the dial into the nozzle. Rotate the dial counterclockwise until it
clicks into an intensity setting to engage. Rotate further to change the
intensity setting.
6. USED CARTRIDGE DISPOSAL
Dispose of the old cartridge by dropping it into the trash.
NOTE: Odor cartridges should be replaced every 6 months for optimal odor
neutralizer technology performance.
sharkclean.com
WHOLE-HOME CLEANING SETTINGS
WHOLE-HOME CLEANING CLEANING MODES
POWER/SURFACE SWITCH
Select surface setting: O Power Off I Hard Floor
For hard floors and small area rugs. II Carpet
For carpets.
SUCTION CONTROL
The Suction Control Slider located on the handle allows you to adjust the
suction depending on the floor type.
MIN: to reduce suction and increase maneuverability on carpets.
MAX: to increase suction on hard floors.
NOTE: For deep carpet cleaning per ASTM F608, use setting II (Carpet) with MAX suction.
NOTE: The brushrolls spin in all modes
HEADLIGHT INDICATOR LIGHTS
UPRIGHT MODE
To engage Brushrolls, select a surface setting, step on floor nozzle and tilt
handle back firmly.
LIFT-AWAY MODE Step on the pedal on the floor nozzle to lift off the pod.
Wand Release
HEADLIGHTS
The headlights will flash or turn red to indicate issues that need attention.
Solid White Lights: The brushrolls are spinning and the unit is working as it
should. Solid Red Lights: There is a jam in the brushroll area. Turn off the
vacuum and unplug it, then remove any blockages in the nozzle. Flashing Red
Lights: The motorized floor nozzle is overheating. Turn off the vacuum, unplug
it, and remove any blockages. Let the vacuum cool down for at least 60 minutes
before restarting. See Troubleshooting section for more information. Flashing
White Lights: The vacuum is operating in an environment that is either too hot
or too cold. This vacuum will only function properly in temperatures ranging
from 32°F (0°C) to 104°F (40°C). Turn the vacuum off and adjust the room
temperature.
NOTE: For deep cleaning per ASTMF608 (embedded dirt in carpets), please set to
Carpet mode. NOTE: For maximum suction for above-floor cleaning per ASTM F558,
set to Hard Floor mode.
sharkclean.com
ABOVE-FLOOR–HANDLE
Press the Handle Release button and pull up on the handle to detach it from
the wand.
A B OV E – F LO O R — WA N D
Press the Wand Release button and pull up on the wand to detach it from the
pod.
ACCESSORIES–HANDLE
Attach an optional cleaning accessory to handle or wand.
ACC E S S O R I E S — WA N D
NOTE: All accessories are compatible with both the wand and the handle.
Included accessories will vary by model.
sharkclean.com
EMPTYING THE DUST CUP IMPORTANT: Unplug the power cord before performing any
maintenance.
Empty the dust cup each time you vacuum and periodically during cleaning, when
debris in the dust cup reaches the MAX fill line.
CLEANING THE FILTERS
Regularly rinse and replace the filters to maintain your vacuum’s suction
power and to maximize the effectiveness of the Odor Neutralizer Technology.
Rinse filters with cold water only. Allow all filters to air-dry for at least
24 hours before reinstalling them to prevent liquid from being drawn into
electronic parts.
IMPORTANT: DO NOT use soap when cleaning the filters.
Foam Felt
Filter Door
Post-Motor HEPA Filter
To remove the Dust Cup, slide up on the release button located on the side of dust cup handle. Tilt dust cup forward, then lift to remove.
To empty debris into the trash, press the lower release button and the bottom of the dust cup will drop open.
RINSE PRE-MOTOR FILTERS EVERY MONTH
Remove the Dust Cup, then lift out Filters.
RINSE HEPA FILTER EVERY YEAR
To remove the HEPA Filter, first pull the tab on the bottom of the filter
door, then lift off the door. Press the tab on the side of the HEPA filter and
pull out the filter.
To reinstall the door, align the top first, then press in the bottom until it
clicks into place.
Clear debris from the Lint Screen in the dust cup. Lift the upper release tab at the top of the dust cup and open the lid. Gently brush the lint screen to remove debris.
To reinstall, place the bottom of the dust cup onto the pod and then tilt until it clicks into place.
sharkclean.com
sharkclean.com
MAINTENANCE
NOZZLE MAINTENANCE
SELF-CLEANING BRUSHROLL If any hair is wrapped around the brushroll, continue
vacuuming, using Carpet/Low Pile mode on a bare floor surface, a low-pile
carpet, or a small area rug. This will allow the self-cleaning brushroll to
remove the hair wrap and send it to the dust cup. If you run over a hard or
sharp object or notice a noise change while vacuuming, check for blockages or
objects caught in the brushroll. If some fibers remain wrapped around the
brushroll after continued use, carefully remove them.
CLEANING THE SOFT ROLLER
CHECKING FOR BLOCKAGES
DUST CUP BLOCKAGES
Detach dust cup from vacuum pod. Empty dust cup and remove debris from lint
screen in the top of the dust cup.
WAND BLOCKAGES
Detach wand from pod and handle, and check both ends for blockages.
Slide the Soft Roller access button forward to release the Soft Roller.
Hand wash the Soft Roller as needed. Use only water, and allow it to air-dry completely for at least 24 hours. Reinsert the Soft Roller in the front of the nozzle until it clicks into place.
CORD MAINTENANCE
1. DO NOT pull or carry vacuum cleaner by the cord or use cord as a handle.
2. DO NOT unplug by pulling on the cord. Grasp the plug, not the cord.
3. DO NOT close the door on the cord. 4. DO NOT pull the cord around sharp
corners. 5. DO NOT leave the cord near heated
surfaces.
To minimize the risk of power cord damage, DO NOT run the vacuum over the power cord. If this occurs, immediately shut off power to the vacuum and remove the cord from the brushrolls or nozzle.
sharkclean.com
HOSE BLOCKAGES Detach hose from handle by pressing on the release button at
the top of the hose. Detach the hose from the pod, and check openings for
blockages.
NOZZLE BLOCKAGE Detach wand from floor nozzle, tilt nozzle neck back, and
check opening for blockages.
HANDLE/HOSE BLOCKAGE Detach handle from wand and hose from the vacuum pod, and
check openings for blockages.
NOZZLE HOSE BLOCKAGE To access the nozzle hose, pinch the release touchpoints
on the bottom of the nozzle, then lift the cover and clear any blockages.
sharkclean.com
AVAILABLE ACCESSORIES
A Crevice Tool
This slender tool offers extended reach to
A
B
access corners, baseboards, tight spaces,
and ceilings.
B Upholstery Tool Picks up hair, dust, and large debris from mattresses, couches, curtains, lampshades, and other delicate upholstered fabrics.
C Pet Multi-Tool
A single convertible tool for cleaning tough
pet messes two ways: use the stiff bristle
C
D
brush to clean stuck-on debris, or take off
the bristles to reveal an upholstery tool
perfect for removing stubborn pet hair and
large piles of debris.
D Duster Crevice Tool Two cleaning tools in one. The crevice tool gives you extended reach to clean in tight spaces, while the soft brush is ideal for dusting delicate surfaces.
E Pet Power Brush
The turbine brush loosens and removes
E
F
pet hair and debris from carpets, and
powerfully deep-cleans dander out of
upholstery and other surfaces.
F Under-Appliance Wand Clean under and behind hard-to-move appliances and furniture with this adjustable 36″ tool. Flip the extension piece over to clean the underside of appliances.
G Anti-Allergen Dust Brush
G
H
This brush features nylon fiber bristles
specifically designed for removing fine
dust and allergen particles from the most
delicate surfaces.
H HairProTM Self-Cleaning Pet Power Brush Tackles pet hair and ground-in dirt from above-floor areas like carpeted stairs and upholstery, while actively removing hair wrap as it cleans.
I Home & Car Detail Kit
Deep-clean your car like a professional
I
J
detailer, or clean hard-to-reach areas in
your home. Micro-sized tools let you clean
around delicate objects and access the
tightest spaces like car vents and computer
keyboards.
J Accessory Bag
This convenient accessory storage bag
measures 32 cm x 70 cm and fits the Under-
Appliance Wand. Smaller size available at
sharkaccessories.com.
NOTE: Not all accessories come with all units. For a list of the accessories
included with this model, see the top inside flap of the box. To order
additional accessories, visit sharkaccessories.com.
sharkclean.com
TROUBLESHOOTING
Power cord caught in brushrolls or floor nozzle. · To minimize the risk of
power cord damage, DO NOT run the vacuum over the power cord.
If this occurs, immediately shut off power to the vacuum and remove the cord
from the brushrolls or nozzle. · Inspect power cord and plug for any damage
before use. DO NOT use vacuum cleaner with a damaged cord or plug. Turn off
all controls before plugging in or unplugging the vacuum cleaner. Store your
vacuum cleaner with the power cord secured around the two cord hooks. Vacuum
is not picking up debris. No suction or light suction. · Check filters to see
if they need cleaning. Follow instructions for rinsing and air-drying the
filters before reinstalling them in the vacuum. · Dust cup may be full; empty
dust cup. · Check handle, hose, hose connections, nozzle, wand, pod, and
accessories for blockages. Clear any blockages found. · If any string, hair,
or carpet fibers are wrapped around the PowerFins® brushroll, carefully cut
debris with scissors and remove from brushroll. See Nozzle Maintenance section
for more information. Vacuum lifts area rugs. · Make sure Power/Surface switch
is set to Hard Floor (setting I). · Ensure the suction control slider on the
handle is set to MIN. · Suction is powerful. Take care when vacuuming area
rugs or rugs with delicately sewn edges. Brushrolls do not spin in carpet
cleaning mode. · If the headlight indicator light turns red, immediately turn
off and unplug the vacuum. Remove pod from floor nozzle and clear any
blockages. Reconnect nozzle, plug in vacuum, and turn on power. · With the
power on, recline the handle, which will automatically turn on the brushrolls.
· If this problem persists on thick carpets, move the suction control slider
to MIN. Vacuum turns off on its own or headlight indicator lights flash red.
If your vacuum overheats, the thermostat will automatically turn off the
motor. Perform the following steps to restart: 1. Turn vacuum off and unplug
it. 2. Empty dust cup and clean filters. See Emptying the Dust Cup and
Cleaning and Replacing the Filters sections for more information. 3. Check for
blockages in hose, wand, floor nozzle, accessories, and inlet openings. 4.
Allow unit to cool for a minimum of 60 minutes. 5. Plug in vacuum and turn it
on. Vacuum is emitting air that smells bad. · Dust cup may be full; empty dust
cup. Empty dust cup after each use for optimal Odor Neutralizer Technology
performance. · Check filters to see if they need cleaning. Follow instructions
for rinsing and air-drying the filters before reinstalling them. · Check to
make sure odor cartridge is installed in the dial and the dial is installed in
the nozzle. · Check the Odor Neutralizer Technology dial on the nozzle to see
what setting is enabled. · If Odor Neutralizer Technology dial is at any
setting from Low to High and the cartridge has been installed for 6 months or
longer, consider replacing it. · If the odor cartridge is still emitting a
scent but you dislike it, consider turning the intensity down, or reinstall
the dial in the nozzle without the cartridge. · If the Odor Neutralizer
Technology cartridge is not emitting a scent, consider replacing it.
For all other issues, please go to support.sharkclean.com or call Customer
Service 1-800-798-7398.
sharkclean.com
FIVE (5) YEAR LIMITED WARRANTY
The Five (5) Year Limited Warranty applies to purchases made from authorized
retailers of SharkNinja Operating LLC. Warranty coverage applies to the
original owner and to the original product only and is not transferable.
SharkNinja warrants that the unit shall be free from defects in material and
workmanship for a period of five (5) years from the date of purchase when it
is used under normal household conditions and maintained according to the
requirements outlined in the Owner’s Guide, subject to the following
conditions and exclusions:
What is covered by this warranty? 1. The original unit and/or non-wearable
parts deemed defective, in SharkNinja’s sole discretion, will be
repaired or replaced up to five (5) years from the original purchase date.
2. In the event a replacement unit is issued, the warranty coverage ends six
(6) months following the receipt date of the replacement unit or the remainder
of the existing warranty, whichever is later. SharkNinja reserves the right to
replace the unit with one of equal or greater value.
What is not covered by this warranty? 1. Normal wear and tear of wearable
parts (such as foam filters, HEPA filters, pads, etc.), which require
regular maintenance and/or replacement to ensure the proper functioning of
your unit, are not covered by this warranty. Replacement parts are available
for purchase at sharkaccessories.com.
2. Any unit that has been tampered with or used for commercial purposes.
3. Damage caused by misuse (e.g., vacuuming up water or other liquids),
abuse, negligent handling, failure to perform required maintenance (e.g., not
cleaning the filters, not removing debris from the brushroll), or damage due
to mishandling in transit.
4. Consequential and incidental damages.
5. Defects caused by repair persons not authorized by SharkNinja. These
defects include damages caused in the process of shipping, altering, or
repairing the SharkNinja product (or any of its parts) when the repair is
performed by a repair person not authorized by SharkNinja.
6. Products purchased, used, or operated outside North America.
How to get service If your appliance fails to operate properly while in use
under normal household conditions within the warranty period, visit
sharkclean.com/support for product care and maintenance self-help. Our
Customer Service Specialists are also available at
1-800-798-7398 to assist with product
support and warranty service options, including the possibility of upgrading
to our VIP warranty service options for select product categories. So we may
better assist you, please register your product online at
registeryourshark.com and have the product on hand when you call.
SharkNinja will cover the cost for the customer to send in the unit to us for
repair or replacement. A fee of $25.95 (subject to change) will be charged
when SharkNinja ships the repaired or replacement unit.
How to initiate a warranty claim You must call
1-800-798-7398 to initiate a warranty
claim. You will need the receipt as proof of purchase. We also ask that you
register your product online at registeryourshark.com and have the product on
hand when you call, so we may better assist you. A Customer Service Specialist
will provide you with return and packing instruction information.
How state law applies
This warranty gives you specific legal rights, and you also may have other
rights that vary from state to state. Some states do not permit the exclusion
or limitation of incidental or consequential damages, so the above may not
apply to you.
REGISTER YOUR PURCHASE registeryourshark.com Scan QR code using mobile device
Scan here or visit qr.sharkclean.com/odortech for more information
Benefits of registering your product and creating an account: · Get easier,
faster product support and
access to warranty information · Access troubleshooting and product care
instructions · Be among the first to know about
exclusive product promotions
TIP: You can find the model and serial numbers on the QR code label on the
bottom of the back of the vacuum pod.
RECORD THIS INFORMATION Model Number: Serial Number: Date of Purchase: (Keep receipt) Store of Purchase:
TECHNICAL SPECIFICATIONS
Voltage: 120V~, 60Hz
Watts:
960W
ODOR NEUTRALIZER TECHNOLOGY SPECIFICATIONS 1. Product Name: Odor Neutralizer Technology Cartridge 2. Manufacturer: Shark Ninja 89 A Street Needham, MA 02494 3. Weight: 17.6g / 0.62oz 4. Ingredients: Solid SM composite polymer C17
- fragrance SE 272235
sharkclean.com
sharkclean.com
NOTES
NOTES
sharkclean.com
sharkclean.com
PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.
This Owner’s Guide is designed to help you get a complete understanding of
your new Shark® DuoClean® PowerFins® HairProTM Lift-Away® ADT with Self-
Cleaning Brushroll and Odor Neutralizer Technology Upright Vacuum.
SharkNinja Operating LLC US: Needham, MA 02494 CAN: Ville St-Laurent, QC H4S
1A7 1-800-798-7398 sharkclean.com
Illustrations may differ from actual product. We are constantly striving to
improve our products; therefore the specifications contained herein are
subject to change without notice. This product may be covered by one or more
U.S. patents. See sharkninja.com/patents for more information.
© 2023 SharkNinja Operating LLC. DUOCLEAN, LIFT-AWAY, POWERFINS, and SHARK are
registered trademarks of SharkNinja Operating LLC. HAIRPRO is a trademark of
SharkNinja Operating LLC.
LA700SeriesIBMPMv5
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>