venn KT-1 Strainer Instructions
- June 9, 2024
- venn
Table of Contents
venn KT-1 Strainer
Strainer
Model: KT-1, 1A, 1D
A new-concept (T-shaped) strainer that is completely different from the
conventional products.
Allow easy maintenance, installation, and reduced pressure loss.
KT-1A Type can be easily cleaned with just one bolt and is ideal for
installation at places where frequent cleaning is necessary.
KT-1D Type is a davit type strainer, which cap can be removed easily.
Type | Multipurpose type | One touch type | Davit type |
---|---|---|---|
Model name | KT-1 | KT-1A | KT-1D |
Code name | KT1-G | KT1-M | KT1A-G |
Size | 50∼300(2”∼12”) | 50∼150(2”∼6”) | 250∼300(10”∼12”) |
Applicable fluid | Steam, gases & liquids | Gases & liquids | Steam, gases & |
liquids
Applicable pressure| Max. 1.0MPa| Max. 1.6MPa| Refer to the table of
applicable pressure below.| Max. 1.0MPa
Applicable temperature| Max. 184˚C²| Max. 220˚C| 5∼90˚C| Max. 184˚C²
End connection| Flanged JIS 10KFF| Flanged JIS 16KRF| Flanged JIS 10KFF
Materials| Body, Cover| Cast iron| Ductile cast iron| Cast iron
Net| Stainless steel
Mesh| 40, 60, 80 or 100 Mesh
Pressure test| Hydraulic 1.75MPa| Hydraulic 2.4MPa| Refer to the table of
pressure tightness below.
| Hydraulic 1.75MPa
1.Punched plate without lining is available upon your request.(Size50-200mm:ɸ3P4.And size250-300mm:ɸ4P6)
2.Applicable temperature Max.220˚C is available upon your request.
3.For size 350-450mm of KT-2, 2D Type are available upon your request.
4.Applicable pressure Max.2.0MPa for KT-4 Type with size 50-300mm is available upon your request.
Construction
Dimensions
Size | L | G | KT-1 Type | KT-1A Type | KT-1D Type |
---|---|---|---|---|---|
H | A | Mass(kg) | H | A | Mass(kg) |
Mass(kg)
50(2”)| 200| –| 64| 110| 7.5| 145| 100| 10.5| –| –| –
65(2½”)| 240| –| 89| 158| 13| 170| 115| 17.5| –| –| –
80(3”)| 265| –| 103| 170| 18.5| 205| 140| 23.5| –| –| –
100(4”)| 290| 130| 128| 200| 30.5| 228| 150| 35| –| –| –
125(5”)| 340| 140| 155| 252| 47| 266| 185| 50| –| –| –
150(6”)| 380| 165| 171| 282| 66| 280| 190| 74| –| –| –
200(8”)| 450| 200| 223| 368| 118| –| –| –| –| –| –
250(10”)| 560| 240| 273| 545| 200| –| –| –| 530| 273| 207
300(12”)| 680| 280| 321| 595| 290| –| –| –| 580| 298| 297
Applicable pressure and pressure tightness for KT-1A type
Size | Applicable pressure | Pressure tightness (Hydraulic) |
---|---|---|
50∼100 mm | Max. 1.0MPa | 1.5MPa |
125 mm | Max. 0.75MPa | 1.13MPa |
150 mm | Max. 0.5MPa | 0.75MPa |