Huajue H07 Wireless Bluetooth Headset Instruction Manual
- May 15, 2024
- Huajue
Table of Contents
WIRELESS BLUETOOTH HEADSET
INSTRUCTION MANUAL
How to connect
- Please keep the distance between the Bluetooth headset and the mobile phone (or other connected devices) within 1 meter, the closer the better;
- Rotate the middle frame of the headset 90°, take out the L/R headset to automatically pair, the pairing time is 3~5 seconds, wait for the connection bluetooth equipment; If the pairing is not successful for 3 minutes, it will be transferred to the automatic shutdown state.
- Turn on the user’s mobile phone Bluetooth function (or other Bluetooth devices), search or scan, at this time the mobile phone will search for nearby Bluetooth device, click on the searched headset name: H07, after successful connection, you can make a mobile phone call at this time, listen to songs;
- After the phone and Bluetooth are successfully connected, the device will automatically shut down after 3 minutes of disconnection from a distance; If the headset is not connected for 3 minutes, the headset will automatically shut down.
Earphone operation mode (power on and pairing)
| IOS system/Siri | Long press the left ear handle for 2-3s to enter Siri |
|---|
Android system
Voice assistant| Long press the ear handle on the left for 2-3s to enter the
voice assistant
Disconnect| Put the earphones in the charging case, close the charging
compartment, and automatically connect back
Earphone operation mode (call control)
Call answer| Press the ear boom 1 time (L/R) on the touch area to answer the
call
---|---
Call hang up| Press the ear boom 1 time (L/R) to touch area to hang up the
phone
Incoming call rejection| Press the ear boom 2 times (L/R) to touch area to
hang up the phone
Earphone operation mode (playing music)
| Play / Pause | Press the ear boom 1 time (L/R) on the touch area |
|---|---|
| Previous piece | Press the ear boom 3 times (L/R) on the touch area |
| Next track | Press the ear boom 2 times (L/R) on the touch area |
| Game mode | The ear lever long presses and holds for 3 seconds (R) to touch |
area cut-in game mode
Volume +| Press the ear boom 4 time (R) on the touch area to vol+
Volume-| Press the ear boom 4 time (L) on the touch area to vol-
Charging compartment LED status indication
| Product status | Indicator light definition |
|---|---|
| Charging box charging | The charging compartment has a solid red light |
| Finished charging | Display ice blue light |
| Charging compartment to charge the headset | Earphones in and out of the |
warehouse, ice blue light breath 1 time each, charging compartment low
power,Enter and exit the warehouse with a red light and breathe 1 time each
Charging compartment low
battery prompt| When the charging case is low, the earphones enter and exit
the warehouse, and the red light breathes 1 time
The charging compartment is
fully charged| The ice blue light is always on
Slide light effect| The first slide charging case activates the light effect,
and the second slide charges it the warehouse switches the lighting effect of
one color; Lighting effects: ice blue light,blue light, green light, red
light; four colors of light effects slide time ring on, the current lighting
effect will automatically turn off the current light effect after 10s without
sliding it.
Slide the charging compartment from left to
right or right to left 1 time to switch one color lighting effect
FCC Warning Statement:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and(2) this device must accept any interference received,
including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>