FEIBIT ELECTRONIC FGS80B0 Smart Home Gateway User Manual
- June 17, 2024
- FEIBIT ELECTRONIC
Table of Contents
Product overview
Thank you for purchasing Smart Home Gateway (hereinafter referred to as
Gateway)
Smart home gateway is an easy to install gateway, its simple and easy to
operate control interface, can eliminate the trouble caused by various
Settings, the device can be with the ZigBee Light Link protocol lamp, ZigBee
HA protocol socket and ZigBee 3.0 protocol equipment and other products for
wireless access.
Indicators and ports description
Indicator description:
- Red light: the gateway is powered on;
- White light: The gateway is starting
- blue light: the gateway has been connected to the router LAN, at this time can perform local operations;
- green: gateway has been connected to the WAN through the router, at this time can be remote operation;
Operation instruction:
Button and port description:
- REST key: Located at the bottom of the gateway
- network port: external network interface, available network cable router
- power interface: Type-c interface, 5V,1A
Operation instruction:
-
with network cable connection: connect the gateway to 5V power supply, connect the LAN port of the gateway and the LAN port of the router with network cable, the gateway indicator turns green, the user searches for “Feibi Zhilink” small program registration and login, scan the two-dimensional code on the back of the gateway for gateway binding.
-
Bind gateway: After logging in to the account in the wechat mini program, go to “Home” – > “Add” – > Bind gateway according to the mini program operation instructions.
-
Add sub-devices: When you see that the gateway indicator turns from white to blue or green, press the Allow access key or the small program to trigger the gateway to allow access to the network, the indicator blinks alternately in five colors: red, blue, green, purple, and green, which means that other devices are allowed to join the ZigBee network. At this time, other devices are allowed to join the network, and the devices will automatically join the ZigBee network.
-
Add sub-gateway: My – > Gateway Management – > Add Sub- gateway.
-
Restore factory Settings: When the gateway is powered on, press and hold the RESET key at the bottom of the gateway for more than 5 seconds. At this time, the white indicator of the gateway blinks quickly, and all devices in the gateway are cleared.
Cautions:
- this product has a matching power adapter, it is strictly prohibited to use other specifications of the power adapter, to prevent damage to the circuit board;
- This product is a wireless communication device, please place it flat about 0.5m away from the ground, do not place it in a metal box to prevent the signal from being shielded;
- the ambient temperature range is -25℃ to +70℃
- avoid use in chemical or combustible gas, saturated salt spray, long-term high humidity or other abnormal environment;
- should be installed in no significant shaking, no impact vibration and no rain and snow invasion of the place, and the medium is not enough to corrode metal and destroy insulation gas and dust, more no explosion risk;
Technical parameter
Operating voltage: DC 5V
Rated power: 2W
Operating frequency band: 2405~2480MHz
Communication protocol standard: ZigBee 3.0
Barrier-free communication distance: 200m
Barrier-free networking distance: 100m
Receiving sensitivity: -97dBm
Maximum transmit power: 20dBm
Operating temperature: -25-70 ℃
Appearance size: 75mm75mm17mm
Warranty description
The company’s products are guaranteed free of charge for one year (except for
damage caused by improper use of exterior parts and personal use)
The following conditions are not covered by the free warranty:
- Machines disassembled or repaired by unauthorized maintenance centers;
- Damage caused by flood, fire, lightning and other natural disasters;
- Damage caused by falling, squeezing, soaking, moisture and others;
- not according to the rated parameters of the product instruction manual (voltage, etc.) caused by product failure (shell is not within the scope of warranty).
Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different. from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE: This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter
RF Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, This equipment
should be installed and operated with minimum distance of 20cm the radiator
your body.
This device and its antenna(s) must not be co-located or operation in
conjunction with any other antenna or transmitter