AC-SAB002 Space Acacia Floor XL Instruction Manual

June 17, 2024
ACACIA

Instruction Manual
Space Acacia
Floor XL

AC-SAB002 Space Acacia Floor XL

MODEL
AC-SABO02

Thank you very much for purchasing an ACACIA product. To use this product safely and correctly, please read these instructions carefully. After reading these instructions,keep this manual in&safe place for future reference. Although this product is expected to  be complete and safe, please check that all assembly parts are included before attempting to assemble the produet Practice assembling nd haling the product in$safe location before using it in th field. If you find anything in the instruction manual that is difficult  to understand, or if you find a defect with the product, stop using it immediately ad contact ACACIA Customer Service

IMPORTANT INFORMATION

Before use: Please read thoroughly to ensure safety and to avoid accidents.

CAUTION Misuse could result in damage to property.

  • DO NOT use around sharp objects.
  • Keep far away from fire.
  • DO NOT use a high-pressure air pump to inflate. Inflate according to the tared pressure, or it will cause overinflation or an explosion.
  • DO NOT leave the floor exposed to direct sunlight for extended periods of time.
  • The load on the land should not exceed 800kg, and the load on the water should not exceed 400kg.

WARNING Misuse could result in serious injury to the user.

USE WITH SPACE ACACIA TENT XL

  • Choose a flat surface to place the floor on and secure it with the tent ground nails.
  • Connect the circle velcro tightly to prevent rain or mosquitoes from entering.

WARNING Misuse could easily result in a serious accident or death.

USE ON WATER

  • Always wear a Personal Flotation Device approved by the Coast Guard. Never allow minors to use it without adult supervision.
  • DO NOT use it before dawn or in poor lighting conditions.
  • DO NOT use if any damage is found. Check the floor for signs of wear or leaks before each use.
  • For information about any water sports or watercraft regulations in your area, please consult your local government.
  • DO NOT use it on water while impaired or under the influence of intoxicants such as alcohol or drugs.
  • It is recommended to inflate to 8PSI when using on the water. Not recommended for carpeting.
  • Please ensure that the floor is fixed firmly before getting on or getting off.
  • When multiple people use it, please keep sitting and keep people evenly on the floor.
  • We recommend that you always use on the water with a partner. It’s safer and more fun.

CONTENTS & PART NAMES

AC-SAB002 Space Acacia Floor XL - Contents Parts Name

STEP 1: SELECT A PUMP (NOT INCLUDED)

  1. The air pressure of the floor is 5-8 PSI. You can choose any air pump that meets the air pressure.
    AC-SAB002 Space Acacia Floor XL - meets the air
pressure

  2. Select the suitable connectors to inflate the floor and limit ring.

STEP 2: INFLATE THE FLOOR

  1. Unroll the floor on level ground with the air valve facing up. Remove the valve caps of the floor and limit ring. Ensure the gas plug of floor is in up position.

  2. Connect the pump joint and valve and then start to inflate. Pump the floor to target air pressure, then put on the valve cap.

  3. Replace the connector of pump and pump the limit ring to target air pressure, then put on the valve cap.
    AC-SAB002 Space Acacia Floor XL - the valve cap

THE USE OF SPACE ACACIA FLOOR XL

USE WITH SPACE ACACIA TENT XL

  1. Set up the tent and remove the ground mat. Put the tent onto the floor, make sure the tent is fully enclosed in the limit ring.
    AC-SAB002 Space Acacia Floor XL - limit ring

  2. Connect the corresponding hooks to the O rings on tent’s corners, adjust the straps to keep tent tight. Fasten the floor to earth by nails through the O rings on strap.
    AC-SAB002 Space Acacia Floor XL - strap

  3. Stick the velcro of the floor and tent, adjust the position to make sure there is no gap. Finally, lay out the carpet.
    AC-SAB002 Space Acacia Floor XL - layout the carpet

USE ON WATER
There are two ways to use the floor on the water, one is to use it alone, and the other is to use it with Space Acacia Tent XL. Please read the respective precautions and warnings on the page 1 carefully.

Use the Floor Alone on Water
Remove all items from the floor and connect the D-ring on the floor with safety rope. The other end of the rope is attached to the shore or boat, and then it can be used on the water.

AC-SAB002 Space Acacia Floor XL - Use the Floor Alone
Water

  • NOTE: Be sure to secure it to other fixtures and objects when using it on water.
  • NOTE: Please use it in still water, because the floor can only be used as a float and cannot be paddled.
  • NOTE: Do not use the floor on the sea.
  • NOTE: Do not exceed safe load.

Use with Space Acacia Tent XL
Set up the floor and tent, put them into the water slowly, fix the floor with safety rope, and then you can step onto the floor to enjoy different fun.

AC-SAB002 Space Acacia Floor XL - Space Acacia Tent XL

  • NOTE: Keep the tent’s door opening when using.
  • NOTE: Do not exercise vigorously on the floor in case an accident happens.
  • NOTE: Do not spend the night on the water.

STEP 3: DEFLATE THE FLOOR

  1. Clear the items above and place the floor on the ground.

  2. Remove the valve caps of floor and limit ring, let them deflate for a while.
    AC-SAB002 Space Acacia Floor XL - Remove the valve cap

  3. Connect the pump to the floor’s air valve. Pump the air out of the floor.
    AC-SAB002 Space Acacia Floor XL - onnect the air Valve

STEP 4: FOLD THE FLOOR

Fold the floor to the size shown. Fold the floor from the far end to the interface.
Roll and tie the floor with cable ties, then put it in the floor bag.

AC-SAB002 Space Acacia Floor XL - FOLD THE FLOOR

  • NOTE: When folding, keep the air valve open and start from the end farthest from it. This helps drain the air inside. Once the folding is complete, close the cap.
  • NOTE: If the volume is too large after folding, check if the residual gas is excessive.

HOW TO MAINTAIN

AC-SAB002 Space Acacia Floor XL - How to maintain

Fixing Tears(< 10 mm)

  1. Completely deflate the board.
  2. Find the leak. Clean and dry the surface.
  3. Cut the patch to the appropriate size, and glue the plain side.
  4. Glue the leak surface and wait 1 minute.
  5. Attach the patch over the tear for 2 minutes.
  6. Be sure to wait 48 hours before inflating again.

FAQ AND MORE INFORMATION

  1. Can I keep my Space Acacia Floor XL inflated?

If you choose to leave the board in direct sunlight for an extended period, it is recommended that you deflate Space Acacia Floor to prevent over-expansion. As this is not covered by the warranty.

  1. What is the best way to store my Space Acacia Floor XL?

We recommend storing it completely dry and rolling it up in the bag before storing it in a garage or shed.

  1. How should I clean my Space Acacia Floor XL?

Soapy water should do the trick! We also like to use mineral spirits for those tougher stains.

  1. Do I have to wear a lifejacket when I use it on water?

For your safety, please wear a lifejacket and use it on the water.

ACACIA
14 Space Acacia Floor XL

Documents / Resources

| ACACIA AC-SAB002 Space Acacia Floor XL [pdf] Instruction Manual
AC-SAB002 Space Acacia Floor XL, AC-SAB002, Space Acacia Floor XL, Acacia Floor XL
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals