OLIGHT FORESIGHT Portable and Rechargeable Lights for Glasses User Manual

OLIGHT FORESIGHT Portable and Rechargeable Lights for Glasses

Product Information

Specifications

• Spotlight Cool White CCT: 5770K
• CRI: 70.3
• Turbo: 200 lumens
• High: 100 lumens
• Medium: 50 lumens
• Low: 15 lumens
• Battery: Polymer Battery 280mAh 3.7V (1.04Wh)
• Total Weight: 129g/4.55oz
• Working Temperature: 2m to 26m

Product Usage Instructions

Charging the Lights for Glasses:

1. Connect the USB charging cable to the USB charging port of the wireless charger.
2. Plug the USB end of the cable into a power source.
3. The lights will indicate the charging status with the battery level indicator.

Using the Lights for Glasses:

1. To turn on/off the lights, press the ON/OFF button.
2. Press and hold the button to cycle through different brightness levels: Low, Medium, High, Turbo.
3. The battery level indicator will flash red when charging and turn off when charging is completed.

Clip Installation:

1. Attach the clip securely to the glasses.
2. Ensure proper alignment for optimal lighting.

FAQ

Q: How do I know when the wireless charger is fully charged?
A: The wireless charger has indicators that show the charging status: Green lights indicate different levels of charge, with all four lights on when fully charged.

Q: What should I do if the battery is low?
A: The lights will flicker to indicate low battery. Please charge the lights promptly to avoid disruption during use.

IN THE BOX

Table 1:
Specification(Lights for Glasses)

Above data are tested per ANSI/PLATO FL 1-2019 standard in Olight’s labs for reference.

Table 2:
USB charging cable

• Charge Type USB

• Cable length  0.8m

• Input 5V/0.2A(Lights for Glasses)
  5V/1A(Wireless Charger)

• Output 5V/0.2A(Wireless Charger)

• Time to fully charge About 1hour(Lights for Glasses)
  About 3hours(Wireless Charger)

Product Overview

Before Use The Wireless Charger

Remove the insulating film between the lights and the wireless charger before use.

Figure 1
Charge the wireless charger

Figure 2
ON/OFF

Figure 3
Change brightness

Figure 4
Battery level indicator

Figure 5
Charge the light with the wireless charger

Figure 6
Clip installation

How to operate:

1. Product specifications, see Table 1 and Table 2;

2. Operating instructions as below:

3. Charge the wireless charger, see Figure 1;
   Please fully charge the wireless charger before use.

4. Turn on/off the light, see Figure 2;
   Press the button to turn on/off the light.

5.  Change the brightness level, see Figure 3;
   When the light is on, press and hold the button, and the light will cycle through Low, Mid, High and Turbo, starting from the present brightness level. Release the button to select the desired brightness level.

6. Battery level indicator, see Figure 4;
   Charging indication of the light:
   The side indicator shows the power of the light.The side indicator flashes red when the light is not fully charged, and turns off when the light is fully charged.
   When the light is being charged, the top indicator will be on for 5 seconds and then off.
   Low battery reminder:
   When the light is on, the light will flicker until the power is off if the battery is low.

7. Charge the light with the wireless charger, see Figure 5;

8. Clip installation.

DANGER

•  Do not look directly at the light source or shine into the eyes, or Do not look directly at the light source or shine into the eyes, or

WARNING

• Do not leave the light in a car where the inside temperature may be over 60°C, or in similar places.
• Before long-term storage, please fully charge the product.
• When the charging port is not in use, keep the dust cover normally closed to prevent dust or foreign objects from entering.
• Please do not place the product in a dusty environment, as dust may enter the switch and cause functional failure;
• Do not disassemble the product.
• Do not immerse the product in seawater or other corrosive media as it will damage the product.
• Please avoid dropping the product and handle it with care.

NOTICE

• A USB adapter with 5W or above is recommended.
• Please keep the light’s magnetic port clean and dry.
• The product adopts PWM regulation, please keep it away from radios to avoid causing noise.

EXCLUSION CLAUSE
Olight is not liable for damages or injuries sustained resulting from the usage of the product inconsistent with the warnings in the manual.

WARRANTY

Within 30 days of purchase: Contact the original seller for repair or replacement.
Within 2 years of purchase: Contact Olight for repair or replacement.
This warranty does not cover normal wear and tear, modifications, misuse, disintegrations, negligence, accidents, improper maintenance, or repair by anyone other than an authorized retailer or Olight itself.

USA Customer Support
cs@olightstore.com

Global Customer Support
contact@olightworld.com
Visit www.olightworld.com to see our complete product line of portable illumination tools.

Dongguan Olight E-Commerce Technology Co., Ltd.
4th Floor, Building 4, Kegu Industrial Park, No 6 Zhongnan Road, Changan Town, Dongguan City, Guangdong, China.
Made in China

References

• Olight | Illuminate Your World.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>