KeTeR A-1308-3 Factor Garden Shed User Manual
- June 17, 2024
- Keter
Table of Contents
- KeTeR A-1308-3 Factor Garden Shed
- Product Information
- Product Usage Instructions
- SITE PREPARATION
- BEFORE STARTING ASSEMBLY
- PARTS LIST
- ASSEMBLY INSTRUCTION
- CARE AND SAFETY GUIDELINES
- 10-YEAR LIMITED WARRANTY
- Contact Information
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
KeTeR A-1308-3 Factor Garden Shed
Product Information
Specifications:
- Model: FACTOR 8×11
- SKU: 17197917
- Dimensions: 248cm x 326cm x 248cm
- Minimum External Space Required: 90cm x 70cm
Product Usage Instructions
Before Starting Assembly:
- Read the care and safety guidelines provided at the end of the manual.
- Review all assembly instructions thoroughly.
- Assemble all parts according to the directions in the manual without skipping any steps.
- Ensure there is enough external space around the shed assembly site for easy access during assembly.
Floor Assembly:
Assemble the floor components in the following order:
- FG (x2)
- FS (x2)
- CO (x24)
- WA (x24)
- SP (x9)
- SPK (x1)
- FOM (x4)
- CS (x7)
- FMK (x7)
Screws:
Use the following screws for assembly:
- SC6 (x2) – 5cm | 1.97 inches
- SC1 (x52) – 2.6cm | 1 inch
- SC12 (x12) – 5cm | 1.97 inches
Door/Front Assembly:
Assemble the door/front components in the following order:
- FGE (x3)
- FS (x1)
- FRE (x1)
FAQ
-
How do I activate the warranty?
To activate your warranty, visit the Keter website and fill in the form under warranty activation. -
What should I do if I encounter missing parts during assembly?
If you find any missing parts, please contact Keter customer support with your purchase details for assistance.
SITE PREPARATION
Level the ground surface
Recommendation: Construct a wooden or concrete base as a foundation
For external access during assembly, make sure to leave enough room around the outside of the shed assembly site.
External floor measurements are:
BEFORE STARTING ASSEMBLY
Read the care and safety guidelines at the end of this manual | Review all assembly instructions | Assemble all the parts according to the directions in this manual. Do not skip any steps.
REQUIRED TOOLS
ASSEMBLY REQUIRES TWO PEOPLE
PARTS LIST
Remove all parts from the package(s) and spread them out on a clean work surface | Code letters are imprinted on each part for easy identification.
ROOF PARTS
SHELVES
FLOOR PARTS
DOOR PARTS
WINDOW PARTS
WALL PARTS
SCREWS
Packaging may contain some additional small parts for use as spare parts
NOTE:
Due to variations in production, the actual assembled size may vary slightly
from the specified dimensions.
ASSEMBLY INSTRUCTION
WALL ASSEMBLY
CHOOSE THE LOCATION OF THE WINDOW
WINDOW ASSEMBLY
A. OPTION
B. OPTION
SECURING THE SHED TO A FOUNDATION
Affix the shed to the foundation by drilling holes in the shed floor at the
pre-marked locations and screwing it into the foundation using appropriate
screws (screws not included).
CARE AND SAFETY GUIDELINES
- The shed is intended for storage purposes only. It is not designed for habitation.
- It is strongly recommended to secure the shed to an immovable object or anchor to the ground by drilling holes in the shed floor (at the pre-marked locations) and inserting proper screws into the ground (screws are not included).
- Do not attempt assembly on windy or cold days.
- Periodically check the shed to ensure that it is stable and that the site is level.
- Be careful when handling parts with steel edges.
- When assembling or handling the shed, use only those tools listed in the user manual.
- Always wear work gloves, safety goggles and long sleeves when assembling or performing any maintenance on your shed.
- Avoid using a lawnmower or mechanical scythe near the shed.
- Wear safety goggles and always follow the manufacturer’s instructions when using power tools.
- Wash the shed with a garden hose or a mild detergent solution. Do not use a stiff brush or abrasive cleaners, including degreasers and oil- or acetone-based cleaning materials, as these may stain or damage the shed.
- Do not store hot items, such as recently used grills and blowtorches, and volatile chemicals in the shed.
- Avoid placing heavy items against the walls, as this may cause distortion.
- Keep the roof clear of accumulated snow and leaves. Large amounts of snow on the roof can damage the shed, making it unsafe to enter.
- Wind direction is an important factor to consider when determining the location of the shed. Reduce exposure to the wind, in general, and to the door side in particular. Keep doors closed and locked when the shed is not in use to prevent wind damage.
- Do not stand on the roof.
- Consult your local authorities to check if permits are required to erect the shed.
10-YEAR LIMITED WARRANTY
- Your Keter shed (“the Product”) was manufactured from high-quality, recyclable materials under rigorous control and supervision.
- Should a problem occur with the Product, please address your claim to Keter customer service on our website (www.keter.com) or by phone.
- This warranty covers product failure resulting from defects in manufacturing or materials for 10 years from the date of the original retail purchase. (The term “defects” is defined as imperfections that impair the use of the Product).
- This warranty does not cover defects resulting from normal wear and tear, including, but not limited to, scuffing, scratches or fractures caused during use, discolouration or fading, rusting, unreasonable use, abuse, negligence, alterations, painting, moving, transporting or relocating the Product, “acts of Nature”, including, but not limited to, hail, any type of storm, flood and fire, and consequential or incidental damages.
- Assembly and handling not under the recommendations, guidelines and restrictions as described in the Product’s user manual, and usage for commercial or public applications, will void this warranty.
- Keter is not responsible for any damage incurred by third parties or damage to or loss of objects inside or near the shed.
- Upon submitting proof of purchase and evidence of the claimed product failure, and subject to reporting the failure on time, Keter, at its sole discretion, will replace defective parts of the Product, or refund you a prorated portion of the purchase price on a straight line depreciated basis for the length of the warranty.
For assistance with assembly, or to request replacement parts, log onto our website or call Customer Service. DO NOT RETURN THE PRODUCT TO THE STORE.
Contact Information
US:
- 6435 South Scatterfield Road, Anderson, Indiana 46013, USA
- Tel: 1-(888)-374-4262
- Fax: 317-575-4502
- Canada: Tel: 1-(800)-661-6721
UK:
- Unit 4, Woodgate Business Park, Clapgate Lane, Birmingham, B32 – 3DB, United Kingdom.
- Tel: 0121-5060008
- Fax: 0121-4220808
Spain:
- Avenida Conde de Romanones 6-b. Polg. Ind. Miralcampo, 19200 Azuqueca de Henares – Guadalajara, Spain
- Tlf. +34.949 27 74 21
- Fax +34.949 34 89 76
Other European Countries:
- Ericssonstraat 17, Postbus 224, 5120 AE Rijen, the Netherlands
- Tel: 31-1612-28301,
- Fax: 31-1612-28322