TECKNET M012 Cordless Mouse User Manual

TECHNET M012 Cordless Mouse

Product Information

Specifications

• Model: M012
• Connection: 2.4 GHz USB Version 2.0
• Power Source : 3V battery (batteries not included)
• Buttons : Left click, Right click, DPI switch, Scroll wheel
• Features: Nano receiver, DPI indicator

Product Usage Instructions

Setting Up the Cordless Mouse

1. Locate the USB port on your computer.
2. Take out the nano receiver from the mouse.
3. Insert the nano receiver into the USB port of your computer for wireless connectivity.
4. Make sure the mouse is powered with a 3V battery (not included).

Using the Cordless Mouse

The cordless mouse features multiple buttons and a DPI switch for customization:

• Left Click: Use the left-click button for standard selection and operations.
• Right Click: The right-click button is used for context menus and secondary actions.
• DPI Switch: Adjust the DPI sensitivity using the DPI switch for precise cursor movement.
• Scroll Wheel: Navigate through documents and web pages using the scroll wheel.

Troubleshooting

If you encounter any issues with the cordless mouse, refer to the user manual for troubleshooting steps or contact customer support.

FAQ

• Q: How do I change the battery in the cordless mouse?
  • A : To change the battery, locate the compartment on the underside of the mouse, replace the old battery with a new 3V battery, and close the compartment securely.
• Q: Can I use the cordless mouse with a different nano receiver?
  • A : It is recommended to use the original nano receiver that came with the mouse for optimal performance and compatibility.

Package Contents

• 1 × TeckNet M012 Cordless Mouse 1 × USB Nano Receiver
• 1 × User Manual
• Note : Batteries NOT included

Product Layout

1. Left Click Button
2. DPI Switch Button
3. Scroll Wheel
4. Right Click Button
5. Forward Button
6. Backward Button
7. DPI indicator

Specifications

• Button Count : 6 Buttons
• Operating Frequency : 2.4GHz
• Receiver interface : USB version 2.0
• Operating Voltage : 3V
• Operating Current : <10mA
• Transmission Power : 1.5dBm

System Requirements

To use this mouse, your computer must meet the following hardware requirements and run one of the operating systems listed below.

Hardware

• PC with a Pentium processor or equivalent AMD processors
• USB 2.0

Operation System

• Windows 2000, 2003, XP, Vista, Win7, Win8, Win8.1, Win10
• Note : The scroll wheel only works under the operating systems listed above. If you use the mouse under a different operating system, the mouse may either not work or lose its enhanced features.

Installing the Batteries

The RF 2.4GHZ optical mouse uses 2pcs AAA batteries (Batteries not included).

1. Open the battery cover.
2. Install the batteries into the compartment, ensuring they correspond with the polarity marking.
3. Replace the battery cover.
4. Switch on the mouse by adjusting the power switch underneath the mouse. The red LED of the power indicator（the scroll wheel LED) will flash.

Note:

1. Make sure that the polarities of the batteries is correct. The positive (+) and negative (-) ends of each battery must match the positive (+) and negative (-) markings in the battery housing.
2. Open the battery compartment cover, knock the mouse slightly, and percuss the mouse slightly,  the batteries will move out of the compartment for reloading the new batteries, ensuring they correspond with the polarity markings.

Connecting the Receiver

Take out the USB Nano receiver and plug it into a free USB port on your computer. The Plug & Play function of your system will detect that a new device has been connected and install it automatically.

Intelligent Power Saving (IPS)

The mouse is equipped with an Intelligent Power Saving (IPS) function.

• When the USB Nano receiver is disconnected or the PC is switched off, the mouse will be switched off automatically for the purpose of power-saving.
• When your mouse is not used for 3 seconds, it will automatically drop to the first level of IPS. To wake the mouse, click any button.
• When your mouse is not operated for 10 seconds, it will automatically drop to the second level of IPS. To wake the mouse, click any button.
• When your mouse is not operated for 8 minutes, it will automatically drop to the third level of IPS, i.e. sleep mode. To wake the mouse, click any button.

DPI Switch

Press the DPI button to cycle through 3 DPI levels.

Reconnection

There is a wireless signal connection code for this mouse. High temperatures, electro-magnetic fields or vibration may influence the code signal and occasionally the mouse may need to be reconnected. Both the mouse and Nano Receiver have a built-in code and one mouse can be connected to one receiver, or several mice to one Nano Receiver. The mouse and Nano Receiver may need to be reconnected if subjected to high temperature, electromagnetic fields or strong vibrations.

1. Unplug the Nano receiver from the USB port, and plug it back in.
2. Move the mouse to within 50cm of the Nano Receiver or re-install the battery or press any key to reconnect; the above process must be completed in 15 seconds.
3. The mouse will be ready for use after reconnection.

Attention

1. To maximize battery life, it is recommended you use the mouse on a white or light colored surface.
2. If not used, the mouse will drop into an auto-sleeping mode within 3 seconds, press any key or scroll wheel to activate the mouse.
3. 3. Never use the mouse on a glass or mirrored surface, as these surfaces will cause the mouse to fail temporarily.
4. The mouse might not work smoothly on some special surfaces, such as smooth, dark or black, reflecting and 3D mouse pads surfaces.
5. Please avoid using the mouse on a metal surface. Metals, such as iron, aluminum or copper, shield the radio frequency transmission and may slow down the mouse presenter’s response time or cause the mouse to fail temporarily.
6. If your PC has a metal case that contains aluminum or magnesium, use the mouse to the side. The display panel may interfere with the radio frequency signal if you use the mouse directly in front of the PC.
7. Please remove the batteries if you are not going to use it for a while (several weeks or months).

Note on handling batteries

• Keep batteries out of the reach of children.
• Replace old or weak batteries promptly.
• Remove the batteries if the mouse is not going to be used.

Safety Measures

• Keep the mouse away from young children.
• Any attempt to disassemble, adjust or repair the mouse may result in exposure and other safety hazards.

Troubleshooting

What do I do if the mouse does not work?

• Make sure that the polarity of the batteries is correct. The positive (+) and negative (-) ends of each battery must match the positive (+) and negative (-) markings in the battery housing.

• Make sure the batteries are not discharged.

• Please try to remove the batteries, and reinstall the batteries again.

• Verify that your computer’s power management features are turned off.

• Check that the Nano receiver’s USB connector is firmly attached to the USB port of your computer.

• Still not working? Please try “Reconnection”.

• The USB Nano receiver is recognized by Windows (Vista, Win 7, 2000, 2003, 2007, Win8) but the cursor does not move.

• Check whether the low power indicator on the top of the mouse lights up. If the sensor lights up, the batteries are likely discharged. Please replace them.

• If replacing the batteries does not help, it is likely that the mouse is not connected to the receiver. Please try “Reconnection”.

• When I use the mouse, other 2.4G Cordless devices work more slowly or fail temporarily – what should I do?

  • The mouse has 34 channels to prevent interference. However, the mouse may cause interference with any cordless, radio-based device that operates at 2402MHz – 2480MHz, such as a 2.4G telephone, 2.4G baby monitors, 2.4G cordless routers and toys. To reduce interference, move the mouse’s receiver and the base unit of the affected device as far away from each other as possible; alternatively, try to change the 2.4G frequency of the affected devices.

• What do I do if the response time of the mouse is slow or the mouse intermittently stops working?

• Ensure that the mouse is within the operational working distance (1.5m) from the USB Nano receiver and restart your PC.

• Increase the distance between the Nano receiver and the base units of other cordless devices.

• Turn off any cordless device and their base units that are near the mouse Nano receiver.

• If you are using the mouse on a metal surface, move the mouse and the receiver to a non-metallic surface. Metals, such as iron, aluminum or copper, shield the radio frequency transmission and may slow down the mouse presenter’s response time or cause the mouse to fail temporarily.
  I can not use the mouse while another cordless mouse is in use – what should I do?

• Please try “Reconnection”.

IMPORTANT SAFETY INSTRUCTIONS FOLLOW THESE INSTRUCTIONS.

1. SAVE THESE INSTRUCTIONS – This sheet contains important safety and operating instructions.
2. Before using the product, read all instructions and caution markings on the product, accessories, and device using our product.
3. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
4. Children should be supervised to ensure that they do not play with the appliance.
5. Keep the product away from fire or explosion may occur.
6. Do not place the product in or near any inflammable, explosive or hazardous object.
7. Do not place in or near water, rain, excess moisture or extreme heat.
8. Do not operate the product with a damaged cord or plug.
9. Do not operate the product if it has been damaged in any way.
10. Do not disassemble the product. Disassembly may result in a risk of safety hazards.
11. Do not throw or shake the product.

Limited 12-Month Warranty

What does this warranty cover?

Shenzhen Unichain Technology Co., LTD. (Manufacturer: “Unichain”) warrants to the original purchaser of this TECKNET product that the product shall be free of defects in design, assembly, material, or workmanship. What the period of coverage is.
Unichain warrants the TECKNET product for 12 Months.

What will we do to correct problems?

Unchain will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product).

What is not covered by this warranty?

All above warranties are null and void if the TECKNET product is not provided to Unichain for inspection upon Unichain’s request at the sole expense of the purchaser, or if Unichain determines that the TECKNET product has been improperly installed, altered in any way, or tampered with. The TECKNETProduct Warranty does not protect against acts of God such as flood, earthquake, lightning, war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (e.g. brownouts or sags), non-authorized program, or system equipment modification or alteration.

How to claim the warranty

Please contact retailers or visit the TECKNET website or email support@tecknetonline.com for more information. To extend the warranty period, please visit the TECKNET website and register your TECKNET products within 90 days of purchase.

Disclaimer

Every effort has been made to ensure that the information and procedures in this guide are accurate and complete, no liability can be accepted for any errors or omissions and we reserve the right to make any changes without further notice to any products mentioned herein.

Correct Disposal of This Product

( Waste Electrical & Electronic Equipment )

This Marking shown on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources. Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.

Business users should contact their suppliers and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

SIMPLIFIED EU DECLARATION OF CONFORMITY

Hereby, Shenzhen Unichain Technology Co., Ltd. declares that the product type M012 is in compliance with Directive 2014/53/EU.
The full text of the EU Declaration of Conformity is available at the following internet address: https://eu.tecknetonline.com/

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Warning : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a  residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
~ Increase the separation between the equipment and receiver.
~ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
~ Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.

References

• TECKNET EU

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>