OLIGHT ZoomBrite Adjustable Focus EDC Flashlight with Red and White Light User Manual

June 17, 2024
OLIGHT

USER
MANUALOLIGHT ZoomBrite Adjustable Focus EDC Flashlight with Red and
White Light

ZoomBrite
Adjustable focus EDC flashlight with red and white light

IN THE BOX

Table 1:
Flashlight
COOL WHITE CCT: 6000K CRI:70OLIGHT ZoomBrite Adjustable Focus EDC Flashlight
with Red and White Light - icon 3


(L)105(W)34(H)15mm
(L)4.13(W)1.34(H)0.59in| Lithium Polymer Battery
1350mAh 3.7V (4.995Wh)

  • Above data are tested per ANSI/NEMA FL 1-2009 standard in Olight’s labs for reference.
    Table 2:
    USB-C charging cable
Charge Type USB-C
Cable length 5V/2A
Input CC&CV  4.2V±0.05V   1A
Output About 1 hour
Time to fully charge 0.8m

OLIGHT ZoomBrite Adjustable Focus EDC Flashlight with Red and White Light -
fig 1OLIGHT
ZoomBrite Adjustable Focus EDC Flashlight with Red and White Light - fig
2OLIGHT
ZoomBrite Adjustable Focus EDC Flashlight with Red and White Light - fig
3

HOW TO OPERATE

  1. Product specification, see Table 1 and Table 2;
  2. Charge, see Figure 1;
  3. Operating instructions as below:

3.1 Lock/Unlock, see Figure 2;
While turned off, press and hold the button (for about 2 seconds) until moonlight mode turns off, the product is then locked out. While locked, if the button is pressed for a short time (less than 1 second), the red indicator light will be on for 2 seconds. Press and hold the button for more than 1 second, moonlight mode will be turned on and the product is unlocked.
3.2 Turn on/off, see Figure 3;
3.3 Moonlight mode, see Figure 4;
Press and hold the button for more than 1 second while the light is off, moonlight mode will be turned on. If previous mode before turning off was moonlight mode, just press the button.
3.4 Turbo mode, see Figure 5;
Quickly double-press the button in white light mode to enter turbo mode, double-press again to return to the previous mode.
3.5 Strobe mode, see Figure 6;
Quickly press the button three times or more to enter strobe mode, single press or long press to return.
3.6 Change brightness, see Figure 7;
In the white light mode, long press the button to change the brightness. The output starts from the current brightness, and changes in the order of moonlight (or
Turbo)->Low->Medium->High->Low.
Release the button to select the brightness.
3.7 Red light mode, see Figure 8;
While the light is off, double-press to enter red light mode, double-press again to enter SOS mode. Single-press to turn off, and the white light (low- light) mode will be memorized when the light is turned on again.
3.8 Adjust the size of light beam, see Figure 9;
Push the switch up to make the beam smaller, and push down to make it bigger.

 Power indicator:

4.1 Non-moonlight mode, see Figure10-1;
4.2 Moonlight mode, see Figure10-2;
WARNING

  • Do not store, charge or use the product in the car or similar places where the temperature may exceed 60℃.
  • To avoid temporary blindness or permanent damage to the eyes, do not look directly at the light source or shine into eyes.
  • Do not obstruct the lens, or else the energy emitted from the light may cause the object to burn.
  • Do not remove the dedicated battery for charging.

NOTICE

  • Do not use the product while charging.
  • Do not put a hot light into any type of fabric bag or fusible plastic container.
  • To prevent high surface temperatures, do not activate the maximum brightness mode multiple times continuously.
  • When the product gets hot, please change it to low brightness, or turn it off temporarily.
  • Active thermal management: The built-in  thermistor monitors the temperature of the light in real time and suppresses overheating by reducing the output.
  • Keep the charging port clean and dry.
  • Do not disassemble the product.
  • When not charging, please cover the tail cover to keep the charging port clean.
  • Operating time in Turbo or high mode varies with ambient temperature and heat dissipation conditions. The better the heat dissipation, the longer the runtime.
  • Fully charge the battery before extended storage times.

EXCLUSION CLAUSE
Olight is not liable for damages or injuries sustained resulting from the usage of the product inconsistent with the warnings in the manual, including but not limited to using the product inconsistent with the recommended lockout mode.
WARRANTY
Within 30 days of purchase: Contact the original seller for repair or replacement.
Within 2 years of purchase: Contact Olight for repair or replacement.
This warranty does not cover normal wear and tear, modifications, misuse, disintegrations, negligence, accidents, improper maintenance, or repair by anyone other than an Authorized retailer or Olight itself.
USA Customer Supportcs@olightstore.com
Global Customer Support contact@olightworld.com
Visit www.olightworld.com to see our complete product line of portable illumination tools.

Dongguan Olight E-Commerce Technology Co., Ltd.
4th Floor, Building 4, Kegu Industrial Park, No 6
Zhongnan Road, Changan Town, Dongguan City,
Guangdong, China.
Made in ChinaOLIGHT ZoomBrite Adjustable Focus EDC Flashlight with Red and
White Light - icon3.4000.0576
A. 18, 05, 2023

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals