X XCOVER 243061 Hard Folding Tonneau Cover Installation Guide
- June 15, 2024
- X XCOVER
Table of Contents
243061 Hard Folding Tonneau Cover
Installation Guide
243061 Hard Folding Tonneau Cover
HARD FOLDING TONNEAU COVER
INSTALLATION GUIDE
PARTS LIST
| ITEM | DESCRIPTION | QTY. | |
|---|---|---|---|
| 1 | Front clamps | 2 | |
| 2 | Rear clamps | 4 | |
| 3 | Triangle screw | 2 | |
| 4 | Fastening nut | 2 |
ADDITIONAL REPLACEMENT PARTS
5| | Buckle Base| 1
6| | T-bar| 1
7| | Buckle| 2
8| | Bolts| 2
- Clean truck bed thoroughly before installation.
- Stick the supplied front seal strip on the front bed rail by aligning with the outer edge.
Place the cover that has been assembled on the bulkhead, positioning it against the cab.
- Move the front clamp to the best spot, lock it under the metal bed rail, and twist the Triangle screw into the metal rod to secure the clamp. Lastly, tighten the Fastening nut to keep it from getting loose.
- Connect the provided Rear clamps to the T-bar on the cover as shown in the figure
- Fix the rear clamp on the third cover as shown in the second cover.
- Adjust the connection position of the rear clamp and T-bar as needed. Securely fix the rear clamp to the bed rails by pushing it vertically.
- All clamps must be firmly in contact with the lip of the metal bed rail to ensure a firm cover, and finally move the rear clamp parallel to the left and snap it into the groove to prevent loosening.
FINISH THE INSTALLATION
-
After rear clamps have been latched securely, close/lock tailgate and cover cannot be opened from the outside
All clamps must be firmly in contact with the lip of the metal bed rail to ensure a firm cover. Finally, close the tailgate to complete the installation.
NOTE: COVER MAY NOT COMPLETELY COVER TO THE OUTSIDE EDGE OF THE BED RAILS DUE TO SLIGHT DIFFERENCE IN TRUCK BED SHAPE FOR DIFFERENT YEAR MODELS -
When it is necessary to completely fold the cover, place the rear clamps correctly clamping rubber block, and then fold it.
SPECIAL INSTRUCTIONS FOR Al TERNATIVE BRACKETS
SUPPLEMENT TO INSTALLATION INSTRUCTIONS(Only for models with utility track)
Use for NISSAN FRONTIER
Use for TOYOTA
Use for JEEP GLADIATOR
ADDITIONAL REPLACEMENT PARTS INSTALLATION
Products may be damaged during the transportation process. If any damage
occurs, please contact us immediately or replace the damaged parts with our
additional parts. 