DOMETIC RML8330 Built In Refrigerator Instruction Manual

DOMETIC RML8330 Built-In Refrigerator

Guide to Installing Door Stop Kit and Removal of Inside Cabinets Demonstrated using a right-hinged unit

Power Off

Ensure that the power to the fridge is disconnected

Removal of Door

1. Open the door so that it is almost closed but not latched yet
2. Locate the 3 screws on the top of the fridge that are connecting the top door hinge to the fridge
3. Remove the 3 screws attaching the top door hinge to the fridge
4. Pull the door out at the top and begin to lift upwards
5. Once the door is removed, locate the bottom hinge
6. Remove the Pin that is connected to the bottom hinge

Installation of Door Stop

1. Install new hinge piece and the M4x5 hex head screw
2. Locate the trim screw on the bottom right of the door ( Bottom Left of the door for a left sided hinge, Always opposite of handle side)
3. Remove the trim screw
4. Place the new door stop piece on the door and screw down using the new 4×20 screw that was included in the kit
5. Once door stop piece is attached to the door, place the bottom of the door onto the new pin on the bottom hinge
6. Replace top hinge through slot in the trim, and reattach to the top of the fridge using the old Screws

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>