BESBUY Smart 7 In 1 Keyless Entry Door Lock Installation Guide

BESBUY Smart 7 In 1 Keyless Entry Door Lock

Product Details

How to Install the Lock

1. Measure the Door Size
   Make sure door thickness is 1.49-1.88″, door hole diameter is 2-1/8″, measure backset size is 2-3/8″ or 2-3/4″ with the deadbolt.

2. Adjust the Length of the Deadbolt
   Adjust the deadbolt to 2-3/8″ or 2-3/4″ based on your door backset size .

3. Install Deadbolt
   Fix the deadbolt with 2pcs deadbolt screws, keep the deadbolt in retracted status.

4. Install Exterior Lock
   Route the IC cable below the deadbolt, spindle must be in ‘vertical’ status .

5. Fix the Mounting Plate

   • a. Fix the black rubber pad on the metal plate(black rubber pad face inside), route the cable through the hole in the mounting plate, word with “Cable Hole” should face outside.
   • b. Fix the plate with 2pcs mounting plate screws.

6. Install the Interior Lock

   • a. Connect the IC cable tightly.
   • b. Rotate the door knob in a vertical position and insert the spindle(Don’t load batteries until lock is completely installed).

7. Fix Interior Lock

   • a. Secure the lock with 3pcs interior lock scews.
   • b. Test the lock by rotating the doorknob to see if the deadbolt can be extended and retracted smoothly.

8. Install Batteries
   Please install 4 pcs AA batteries in unlock status and keep the door open to avoid being locked out.

Detect Left/Right Hand Door

Set left/right-hand door
The most important step is to adjust this smart lock ‘door opening direction’ by phone App or programming code. Recommend to use TT lock App on phone for easier setting.

How to know your door opening direction?
Standing outside of your door(Facing the keypad), locate the door hinge. Hinge is on the left, go to Next Lock→Settings→Door opening direction→choose ‘open to left'(Left hand door) hinge is on the right, go to Next Lock→Settings→Door opening direction→choose ‘open to right'(Right-hand door)

NOTE:

1. Please register a TT Lock account and make sure the lock is paired with the TT Lock App before you set the ‘door opening direction’ on the phone, detailed steps can be seen on APP·KEYPAD MANUAL
2. Detailed steps about programming code can be seen on APP·KEYPAD MANUAL

How to Reset the Lock

Reset method 1: (Recommend)

1. Take down one battery and wait for 5 seconds.
2. Put the battery back.
3. Long press the reset button for 10 seconds while the keypad lights up.
4. After hearing “Please input the initialization password”, enter 000#.
5. After hearing “Administrator deleted successfully”, reset successfully.

NOTE: If method 1 doesn’t work, please try method 2 or contact customer service for help.

Reset method 2:

1. Uninstall the back lock by taking down the battery cover. take out the 3 screws on the back lock.
2. Load the batteries.
3. Hold the Reset Button (The position is shown below) for 5 seconds. You’ll hear the sound” input initialization passcode” from the lock.
4. Input 000# on the keypad after the sound. You’ll hear “Administrator deleted successfully”, which means reset successfully.

Quick Guide to Using the Lock

Your lock is now installed! Let’s learn to use it!

Unlock the door from outside
Default admin passcode: 123456#

Unlock the door from inside

Lock the door from the outside

1. Hold”#” on the keypad for 2S.
2. In auto-lock mode, the bolt will extend out automatically.
3. Lock with physical keys.
4. Lock by App on the phone.

Lock the door from inside

1. Rotate the turn piece to lock position.
2. Lock by App on the phone.

How to program the lock
The lock product programming via the TT lock APP and Keypad

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>