FOCAL 091SUB12 Sub 12 Subwoofers User Manual
- June 9, 2024
- FOCAL
Table of Contents
091SUB12 Sub 12 Subwoofers
User Manual
091SUB12 Sub 12 Subwoofers
SUBWOOFERS SUB 12
Product sheet
Designed and developed in France, the Sub 12 benefits from Focal’s renowned
savoir-faire. With its 30cm polypropylene cone, this subwoofer provides an
excellent bass boost for any on-board audio system. It features a single-coil
architecture for simplicity and efficacy.
Key points
- A deep and powerful bass
- Effective as bass-reflex or sealed box
- Sealed box from 15L
- Bass-reflex box from 30L
- Robust design
- Excellent power handling
Type | For sealed and bass-reflex enclosure |
---|---|
Diameter | 30cm |
Cone | Polypropylene |
Magnet | Ferrite |
Surround | Butyl |
Max. power | 600W |
Nominal power | 300W RMS |
Sensitivity (2.83V/1m) | 88dB |
Impedance | 4 Ω |
SUBWOOFERS
Sub 10 | Sub 10 Dual | Sub 10 Slim
Sub 12 | Sub 12 Dual | Sub 12 Slim READ FIRST!
IMPORTANT SAFETY INSTRUCTIONS!
The exclamation mark represented in an equilateral triangle is intended to alert users to the existence of important instructions in the user manual relating to the use and maintenance of the device.
- Read these instructions.
- Keep these instructions.
- Heed all the warnings.
- Follow all the instructions.
- To avoid damagingyour hearing, do not listen to loudspeakers at high volumes for long periods of time. Listening to loudspeakers at highvolumes can cause damage to the user’sears and may lead to hearing problems (temporary or permanent deafness, buzzing in the ears, tinnitus, hyperacusis). Exposure to excessive volumes (over 85 dB) for more than one hour can cause irreparable damage to your hearing.
- If a subwoofer is installed in your vehicle, it is important to secure it firmly. We recommend that you attach the enclosure to the floor or chassis of the vehicle for safety. If the subwoofer is not properly secured, it could become a projectile in the event of an accident. This point is even more important if the subwoofer is installed in a hatchback, a station wagon, a utility vehicle or a van. (CEI 60417-6044)
- If cables or harnesses are provided, use them the proper way (like mentioned in this user manual) without replacing or modifying them. 8. If a fuse is included in the kit or harness, use only same rating one in case of replacement.
SUBWOOFERS
User manual
- Holes for attaching to closed cabinet, bass-reflex cabinet in the vehicle: Please use suitable screws to avoid damaging the floor of your vehicle or any of its other components.
- Screw terminals : Connect your subwoofer to the amplifier using the terminal found on the rear of the speaker.
- Speaker driver: Ensure that the woofer is pointing towards an open space in order to achieve the best acoustic performance. Ensure that there are no objects positioned across the grille, as this could damage the speaker drivers of your subwoofer.
SUB 10
V (L)| F-3 (Hz)| Ø|
---|---|---|---
25| 35| 7cm| 35cm
30| 31| 8cm| 45cm
35| 28| 8cm| 45cm
SUB 12
V (L)| F-3 (Hz)| 0|
30| 35| 7cm| 35cm
33| 33| 8cm| 45cm
40| 31| 8cm| 45cm
SUB 10 DUAL
V (L)| F-3 (Hz)| 0|
25| 35| 7cm| 35cm
30| 32| 7cm| 35cm
331| 31| 7cm| 35cm
SUB 12 DUAL
V (L)| F-3 (Hz)| 0|
30| 30| 7cm| 35cm
35| 28| 8cm| 45cm
40| 25| 8cm| 45cm
SEALED ENCLOSURE / CAISSON CLOS
V 04 | F.3 (Hz) |
---|---|
SUB 10 | SUB 10 DUAL |
10 | 37 |
35 | 33 |
20 | 31 |
25 | 30 |
30 | |
SUB 10 | SUB 10 DUAL |
--- | --- |
Type | For sealed and bass-reflex enclosure |
enclosure
Diameter| 25cm| 25cm
Cone| Polypropylene| Polypropylene
Magnet| Ferrite| Ferrite
Surround| Butyl| Butyl
Max. power| 500W| 500W
Nominal power| 250W RMS| 250W RMS
Sensitivity (2.83V/1m)| 85dB| 85dB
Impedance| 4 Ω| 4 Ω + 4 Ω
| SUB 10 SLIM| SUB 12
---|---|---
Type| For sealed enclosure| For sealed and bass-reflex enclosure
Diameter| 25cm| 30cm
Cone| Polypropylene| Polypropylene
Magnet| Ferrite| Ferrite
Surround| Butyl| Butyl
Max. power| 460W| 600W
Nominal power| 230W RMS| 300W RMS
Sensitivity (2.83V/1m)| 85dB| 88dB
Impedance| 4 Ω| 4 Ω
| SUB 12 DUAL| SUB 12 SLIM
---|---|---
Type| For sealed and bass-reflex enclosur| For sealed enclosure
Diameter| 30cm| 30cm
Cone| Polypropylene| Polypropylene
Magnet| Ferrite| Ferrite
Surround| Butyl| Butyl
Max. power| 600W| 560W
Nominal power| 300W RMS| 280W RMS
Sensitivity (2.83V/1m)| 88dB| 87dB
Impedance| 4 Ω + 4 Ω| 4 Ω
Please validate your Focal-JMlab warranty, it is now possible to register your product online: www.focal.com/warranty
Thank you for purchasing a Focal product. Welcome to our HighFidelity world.
Innovation, tradition, excellence and pleasure are our values; our one and
only aim is to bring
you a sound that is rich, pure and true. To get the most out of your product,
we recommend that you read the instructions in this booklet, then store it in
a safe place to
refer to in the future.
Important recommendations
First of all, check the space available for fitting the speaker drivers (refer
to the plans on the packaging) then proceed with the cutting required. If
mounted in the factory location, check that there is sufficient space between
the speaker driver and the protective grille.
- Clear the speaker drivers of any metal shavings and dust particles.
- Clean carefully before mounting the speaker drivers.
Conditions of warranty
All Focal loudspeakers are covered by warranty drawn up by the official Focal
distributor in your country. Your distributor can provide all details
concerning the conditions of warranty. Warranty cover extends at least to that
granted by the legal warranty in force in the country where the original
purchase invoice was issued.
Our policy of continual product improvement means that Focal-JMlab reserves
the right to modify the technical specifications of its products without
notice. Product may vary from images.
Break-in period
Sud 10 and Sub 12 drive units use the very latest components, in the
classic format. To ensure such complex mechanical elements work in harmony
with each other, they must be allowed to function correctly in this
environment. Changes in temperature and humidity are regarded as very hostile.
In order to get the best of your subwoofer, a running-in period must be
respected to ensure they are ready for this. We recommend that, once the
system is ready for listening, the drive units should be run-in with medium
volume setting, with music that has the full bandwidth of frequencies (sub-
bass through treble). This running-in period should last for a few weeks, to
gain the full potential. After which the excellent performance of your
Subwoofer can be fully appreciated.
Correct elimination of this product.
This marking indicates that within the EU this product should not be disposed
of with other household wastes. To prevent any risk to the environment or
human health, please recycle them responsibly to encourage the reuse of
material resources. To return your used device, please use the return and
collection systems available, or contact the retailer where you purchased the
product. They can recycle this product safely.
Please validate your Focal-JMlab warranty, it is now possible to register your
product online: www.focal.com/warranty
Focal-JMlab
– BP 374 – 108, rue de l’Avenir
42353 La Talaudière cedex – France –www.focal.com
Tel. (+33) 04 77 43 57 00 – Fax (+33) 04 77 43 57 04
SCCG – 08/06/2022 – V1
Documents / Resources
|
FOCAL 091SUB12 Sub 12
Subwoofers
[pdf] User Manual
091SUB12 Sub 12 Subwoofers, 091SUB12, Sub 12 Subwoofers, Subwoofers
---|---
References
- Top-of-the-range speakers and hi-fi equipment | Focal
- Extension de garantie | Focal
- Se connecter à focal-naim
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>