BesBuy RV Keyless Entry Door Lock Instructions

RV Door Lock Manual

Structure size

Locks installed

1. Unscrew and remove platen assembly
2. Install the front half assembly into the door panel hole
3. Plug into socket ,Then knob is inserted Into the rotating shaft with azimuth alignment
4. Assemble the platen assembly with the front part assembly
5. Mounting deadplate
6. Mounting pinchplate

How to change the new code

Step1

1. Press and hold “8”
2. Tap the lock button, then release “8”
   ( Notice: keyboard flashing means it enter programming mode, you can continue to operate, if not, you have to restart from step 1)

Step2
Enter the factory password “1 2 3 4”
+ Lock button

Step3

1. Enter the new password + Lock button within 2 seconds
2. Enter the new password + Lock button again, you will hear 2 beep sound, the new password is successfully set

How to set FOB remote

1. Hold the screwdriver in one hand and press the fob learn hole for 2-3 seconds, Hold down any button on the remote control with the other hand and aim at the combination lock.
2. Then you will hear a sound of bi, the connection is successful
3. If two remote controls are used interchangeably, and there is a stuck problem, itis the code lock processing signal, which is a normal phenomenon. You can press the remote control button repeatedly to operate normally.

Using the reset function

If you repeatedly set the password or bluetooth key, it may disrupt the program of the combination lock and cause the password or key to fail. Please don’t worry, you can reset the combination lock (use a screwdriver to long press hold code reset (on the back) and you will hear a sound of bi), the combination lock will become the original appearance, and the password will also change.
into 1234, after reset, you can reset the password or bluetooth key again.

To replace a battery

To replace a battery, perform the following operations:

1. Remove the back battery door screw with a screwdriver.
2. Open the battery door and place the battery, note: the battery on the left side and the battery on the right side need to be flipped in the opposite way, pay attention to the position of the battery spring for installation.
3. Snap on the battery door and screw, you can complete the battery installation.

Common problems

1. Why does the remote control not work?

Please check 1. Whether the ON/OFF button on the back of the password lock is switched to ON, if it is in the OFF state, the remote control function is not working. 2. Check whether the red light is on when the remote control presses the switch, if not, it means the battery is not charged. 3. Be sure to confirm that the pairing of the remote control has been completed before using the remote control. 4. Ensure that the combination lock is operated within the available range of the remote control, and the maximum remote control range is 15m (50ft)

2. How to eliminate the sound of the keys?

3. Forget the reset password, how to restore to the factory password 1 2 3 4?

4. Is the product suitable for Class A and Class C RVs?

5. Can I use the two remotes together?

Yes, they can be used together, they need to be paired separately, and they can be used together after the pairing is completed.

6. What do I need to pay attention to when resetting the password?

1. The first step must confirm that you hear the beeping sound and the screen starts flashing before proceeding to the next step, otherwise you have to continue to complete the first step until the keyboard flashes. 2. Confirm that the old password is entered once and the new password is entered twice, and the beeping sound will be heard after completion to represent successful password setting After the password reset, the initial password *1 2 3 4

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>